Instruction/ maintenance manual of the product 95852 Harbor Freight Tools
Go to page of 16
150 LB. DR YW ALL P ANEL HOIST Model 95852 ASSEMBL Y AND OPERA TION INSTRUCTIONS Due to continuing impro vements , actual product ma y diff er slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our website at: http://www .
P age 2 SKU 95852 For technical questions, please call 1-800-444-3353 SPECIFICA TIONS Capacity 150 lb . P anel Size Capacity 4’ x 16’ Maximum Maximum Lift Height 11 F eet Net Weight 124 lb .
P age 3 SKU 95852 For technical questions, please call 1-800-444-3353 Use ey e protection. Alwa ys wear ANSI-approv ed impact saf ety goggles. Do not overreach. K eep proper footing and balance at all times. Do not reach ov er or across a P anel Lift while in operation.
P age 4 SKU 95852 For technical questions, please call 1-800-444-3353 W arning: The warnings, cautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that ma y occur .
P age 5 SKU 95852 For technical questions, please call 1-800-444-3353 ASSEMBL Y Setting up the T ripod Base Place the T ripod Base Assembly (1) on the floor with the Casters (4) down. Press down on the Slide Y oke Ring (5) while s wing- ing the two Outer Legs (3) out and back into place .
P age 6 SKU 95852 For technical questions, please call 1-800-444-3353 Attach the Cradle to the Frame Inser t the Cradle P ost, which is par t of Cradle (42) into the opening in the top of the F rame (11). Attach the Cradle to the F rame by rotating the Tilt Latch (47) ov er the stud on the Cradle .
P age 7 SKU 95852 For technical questions, please call 1-800-444-3353 Set Up Legs and Extend the Bac kstop Unlatch the two Outer Legs (3) b y pressing down on the Slide Y oke Ring (5).
P age 8 SKU 95852 For technical questions, please call 1-800-444-3353 Tilt Latch The Tilt Latch (47) allows the Cradle (41) to tilt to adjust the panel as needed f or installation on sloped ceilings or walls . T o lock the Cradle in a le vel position, rotate the Latch up to engage the stud in the Cradle .
P age 9 SKU 95852 For technical questions, please call 1-800-444-3353 OPERA TION Safety Chec ks Before Operation Carefully inspect the lift bef ore operating the tool each time. Inspect the tool for wear or damage. P a y special attention to any wear or damage to the cable .
P age 10 SKU 95852 For technical questions, please call 1-800-444-3353 Raising the P anel CA UTION: Alwa ys lo wer the Backstop (7) to prev ent the Lift from rolling whene ver r aising a panel. Crank the Winch Wheel (27) forw ard as shown to raise the panel to the desired le vel.
P age 11 SKU 95852 For technical questions, please call 1-800-444-3353 DISASSEMBL Y Remov e any panel which might be on the Lift. Release the Brake Ar m (30) and crank the Winch Handle (34) to low er the Cradle (41) all the wa y down. Slide the Cradle Outriggers (44) all the w ay in until the y latch.
P age 12 SKU 95852 For technical questions, please call 1-800-444-3353 MAINTENANCE Inspect the Cable before beginning work each da y . Replace the Cable immediately as soon as wear is detected. CA UTION: A cable breaking while under load can cause se vere personal and proper ty injur y .
P age 13 SKU 95852 For technical questions, please call 1-800-444-3353 OPTIONAL EXTENSION A CCESSOR Y (NO T INCLUDED) An optional Extension Accessor y is av ailable that in- creases the maximum lift height to 15’, instead of the standard 11’.
P age 14 SKU 95852 For technical questions, please call 1-800-444-3353 P ARTS LIST P ar t Description Q’ty T ripod Base Assembl y 1 T ripod Base Assembly , Complete 1 2 Center Leg with F asteners 1 3 Outer Legs with F asteners 2 4 Caster , 5 in.
P age 15 SKU 95852 For technical questions, please call 1-800-444-3353 ASSEMBL Y DIA GRAM Note: Some par ts are listed and shown for illustration pur poses only , and are not av ailable individually as replacement par ts.
P age 16 SKU 95852 For technical questions, please call 1-800-444-3353 W ARRANTY Harbor Freight T ools Co. makes ev er y effort to assure that its products meet high quality and durability standards, .
An important point after buying a device Harbor Freight Tools 95852 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95852 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95852 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95852 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95852 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95852, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95852.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95852. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95852 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
