Instruction/ maintenance manual of the product 95343 Harbor Freight Tools
Go to page of 4
3 / 8 ” ROT AR Y SPOT WELD CUTTER Model 95343 SET UP AnD OPERA Ting inSTRUCTiOnS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE ThiS MAnUAL. Copyright © 2006 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 95343 SPECiFiCA TiOnS Overall Dimensions 2-29/32” L X 1/4” hex shank Material Low carbon steel with chrome plated nish, spring loaded pin Blade Replacement type: 770-3842; 19/32” L X 3/8” OD, Double ended with 8 teeth per end Quickly removes spot welds on sheet metal.
Page 3 For technical questions, please call 1-800-444-3353. SKU 95343 UnP ACKing When unpacking, check to make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight T ools at the number shown on the cover of this manual as soon as possible.
Page 4 For technical questions, please call 1-800-444-3353. SKU 95343 P ARTS LiST Part Description Quantity 1 Shaft 1 2 Bit 1 ASSEMBL Y DiAgRAM 2 1 note: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
An important point after buying a device Harbor Freight Tools 95343 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 95343 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 95343 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 95343 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 95343 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 95343, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 95343.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 95343. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 95343 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
