Instruction/ maintenance manual of the product 94813 Harbor Freight Tools
Go to page of 15
MOT ORCYCLE LIFT AIR OPERA TED - 1,200 LB. CAP ACITY Model 94813 ASSEMBL Y AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 2 PRODUCT SPECIFICA TIONS Maximum Lift Capacity 1,200 Pounds Working Pressure 1 10 to 125 PSI Air Hose Inlet Size 1/4”-18 NPT V al.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 3 PERSONAL SAFETY 1. Stay alert. W atch what you are doing, and use common sense during use. Do not use the Motorcycle Lift while tired or under the inuence of drugs, alcohol, or medication.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 4 SPECIFIC SAFETY RULES 1. Maintain labels and nameplates on the Motorcycle Lift. These carry important information. If unreadable or missing, contact Harbor Freight T ools for a replace- ment.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 5 14. Use compressed air only . Use clean, dry , regulated, compressed air . Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 6 TO QUICK COUPLER (49) OF MOTORCYCLE LIFT REGULA TOR FIL TER OILER FIGURE B T o Connect The Motorcycle Lift T o An Air Compressor: For best service, you should incorporate an oiler , regulator , and in-line lter , as above.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 7 ASSEMBL Y INSTRUCTIONS FIGURE C LIFTING ARM TEETH (24) SAFETY BAR (1 1) SAFETY BAR HANDLE (14) W ARNING! As an additional safety p.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 8 2. STOP PLA TE (1) BOL T (2) W ASHER (29) NUT (27) FIGURE D Align the two mounting slots in the Stop Plate (1) with the two mounting holes located at the rear of the Platform (8).
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 9 T o Install The Ramp: RAMP (10) PLA TFORM (8) FIGURE F With assistance, lift the Ramp (10) and insert its two prongs into the two mounting holes located at the front of the Platform.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 10 OPERA TING INSTRUCTIONS 1. W ARNING! Do not exceed the maximum lifting capacity of this tool (1,200 pounds). Exceeding the maximum lifting capacities could cause personal injury and/or property damage.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 1 1 INSPECTION, MAINTENANCE, AND CLEANING 1. Before each use: Inspect the general condition of the Motorcycle Lift. Check for cracked, worn or damaged parts, loose or missing parts, low or no hydraulic oil, and any other condition that may affect the tool’s safe operation.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 12 MAIN P ARTS LIST NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts. * See the additional Parts List and Assembly Diagram on page 14.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 13 MAIN ASSEMBL Y DIAGRAM NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 14 P ARTS LIST AND ASSEMBL Y DIAGRAM - LIFT DOLL Y (58) P AR TS LIST AND ASSEMBL Y DIAGRAM - FOOT AIR V AL VE (48) NOTE: Some parts are listed and shown for illustration purposes only , and are not available individually as replacement parts.
SKU 94813 For technical questions, please call 1-800-444-3353 P AGE 15 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durabili.
An important point after buying a device Harbor Freight Tools 94813 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 94813 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 94813 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 94813 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 94813 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 94813, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 94813.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 94813. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 94813 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
