Instruction/ maintenance manual of the product 93821 Harbor Freight Tools
Go to page of 10
1/4” MINI RATCHET WRENCH SET UP AND OPERATING INSTRUCTIONS Read this material before using this product. Failure to do so can result in serious injury .
PRODUCT SPECIFICATIONS SAVE THIS MANUAL You will need this manual for the safety warnings and precautions, assembly, operat- ing, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep your invoice with this manual. Write the invoice number on the inside of the front cover.
3. Keep bystanders, children, and visitors away while operating a pneumatic tool. Distractions can cause you to lose control. Protect others in the work area from debris such as chips and sparks. Provide barriers or shields as needed. PERSONAL SAFETY 1.
2. Do not force the tool. Use the correct tool for your application. The correct tool will do the job better and safer at the rate for which it is designed. 3. Do not use the power tool if the Throttle Lever does not turn it on or off. Any tool that cannot be controlled with the Throttle Lever is dangerous and must be replaced.
SKU 93821 For technical questions, please call 1-800-444-3353 PAGE 5 3. Use clean, dry, regulated, compressed air at 90 PSI. Do not exceed the recommended 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
Recommended Compressed Air System Set-Up: 1. For best service, you should incorporate an oiler, regulator, and inline filter when using an air compressor (not included) to operate the Ratchet Wrench.
SKU 93821 For technical questions, please call 1-800-444-3353 PAGE 7 6. If necessary, use a torque wrench (not included) to verify the desired torque of a bolt/nut.
4. CAUTION! All maintenance, service, or repairs not listed in this manual are only to be attempted by a qualified service technician. SKU 93821 For technical questions, please call 1-800-444-3353 PA.
SKU 93821 For technical questions, please call 1-800-444-3353 PAGE 9 NOTE: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts.
LIMITED 1 YEAR W ARRANTY Harbor Freight T ools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of one year from the date of purchase.
An important point after buying a device Harbor Freight Tools 93821 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93821 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93821 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93821 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93821 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93821, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93821.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93821. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93821 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
