Instruction/ maintenance manual of the product 93656 Harbor Freight Tools
Go to page of 10
AIR PIN NAILER ASSEMBL Y and OPERA TING INSTR UCTIONS Model 93656 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at http://www .harborfreight.
SKU 93656 Page 2 For technical questions, please call 1-800-444-3353. Pin Size 23 Gauge, 1 / 2 ” to 1” long, Headless pins Magazine Capacity 10 0 Operating PSI 60-100 PSI Air Inlet Size 1 / 4 ” .
SKU 93656 Page 3 For technical questions, please call 1-800-444-3353. 10. Use eye and ear protection . Always wear ANSI approved impact safety goggles and appropriate hear ing protection. Wear a full f ace shield if y ou are producing metal filings or wood chips .
SKU 93656 Page 4 For technical questions, please call 1-800-444-3353. panel fuse to break. If this happens, either use the compressor without an extension cord or find a larger amperage circuit to use. 21. Maintenance . The maintenance outlined in the maintenance section should be perf ormed regularly .
SKU 93656 Page 5 For technical questions, please call 1-800-444-3353. T esting the Single Sequential Safety T rip Mechanism W arning: Even though the nailer should be empty during this pr ocedure , AL W A YS point the nailer at a piece of scrap wood when testing.
SKU 93656 Page 6 For technical questions, please call 1-800-444-3353. Operating the Nailer 1 . Attach the Nailer to the air supply at the Air Inlet (22) . Star t y our compressor and check the pressure making sure it is set at the recommended 90 PSI and not to go over the maximum 90 PSI.
SKU 93656 Page 7 For technical questions, please call 1-800-444-3353. An ytime an y maintenance or repair s are done (inc luding c learing jams), FIRST : 1 .
SKU 93656 Page 8 For technical questions, please call 1-800-444-3353. An ytime an y maintenance or repair s are done , FIRST : 1 . Disconnect the Nailer from the air hose. 2 . Empty the Magazine (57) completely . 3 . Attempt to fire the Nailer into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any pins.
SKU 93656 Page 9 For technical questions, please call 1-800-444-3353. NO TE : Some par ts are listed and shown f or illustration pur poses only and are not a vailable individually as replacement par ts.
SKU 93656 Page 10 For technical questions, please call 1-800-444-3353. Assembly Drawing Maintenance W arning! Alwa ys disconnect the tool from the air compressor and then empty the magazine of pins bef ore attempting to inspect or perf or m maintenance to the Nailer .
An important point after buying a device Harbor Freight Tools 93656 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 93656 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 93656 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 93656 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 93656 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 93656, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 93656.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 93656. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 93656 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
