Instruction/ maintenance manual of the product 92281 Harbor Freight Tools
Go to page of 18
2.5 HP CHIPPER/SHREDDER ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our W eb site at: http://www .harborfreight.
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this man ual f or the safety w ar nings and precautions , assembly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. K eep your in voice with this manual.
3. Keep bystanders, children, and visitors away while operating a power tool. Distractions can cause you to lose control. ELECTRICAL SAFETY 1. Grounded tools must be plugged into an outlet properly installed and grounded in accordance with all codes and ordinances.
2. Dress properl y . Do not wear loose clothing or je welry . Contain long hair . Keep y our hair , clothing, and glo ves awa y fr om moving parts. Loose clothes, je welr y , or long hair can be caught in mo ving par ts. 3. A v oid accidental star ting.
any other condition that ma y affect the tool’ s operation. If damaged, have the tool serviced before using. Many accidents are caused by poorly main- tained tools. 7. Use only accessories that are recommended by the manufacturer for your model. Accessor ies that ma y be suitable f or one tool may become hazardous when used on another tool.
2. The grounding prong in the plug is connected through the green wire inside the cord to the grounding system in the tool. The green wire in the cord must be the only wire connected to the tool’ s grounding system and must ne ver be attached to an electr ically “live” terminal.
FIGURE B SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 7 6. If you are using an extension cord outdoors, make sure it is marked with the suffix “W-A” (“W” in Canada) to indicate it is acceptable f or outdoor use. 7. Make sure your extension cord is properly wired and in good electrical condition.
SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 8 1. Maintain labels and nameplates on the Chipper/Shredder . These carr y impor tant information. If unreadable or missing, contact Harbor F reight T ools f or a replacement. 2. Use the right product f or the right job.
14. Never leave the Chipper/Shredder unattended when it is plugged into an electrical outlet. T ur n off the machine, and unplug it from its electrical outlet. SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 9 12. Keep all electrical connections dry and off the ground.
26. W ARNING! Some dust created b y pow er sanding, sawing, grinding, drill- ing, and other construction activities, contain chemicals known (to the State of Calif or nia) to cause cancer , bir th def ects or other reproductiv e har m.
SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 11 ASSEMBL Y INSTR UCTIONS NOTE: For additional information regarding the parts listed in the following pages, refer to the Assembl y Diagram on page 17 .
SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 12 3 . Attach the Right Suppor t Leg (35)) to the r ight side of the Motor Suppor t (26), using two Scre ws (27), two W ashers (34), and two Lock Nuts (33).
SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 13 OPERA TING INSTR UCTIONS 1. W ARNING! Use safety equipment. Alw a ys wear ANSI approv ed saf ety impact glasses under an ANSI a.
and turn the Power Switch to its “ON” position to resume cutting. NEVER attempt to disable the Circuit Breaker . (See Figure H.) 11. NO TE: The Motor is equipped with a Saf ety Shut-Off Switch (42) located on the top portion of the Motor Support (26).
INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Mak e sure the P ow er Switch (47) of the Chipper/Shredder is in its “OFF” position and that the machine is unplugged from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
P ARTS LIST SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 16 NOTE: Some parts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts.
ASSEMBL Y DIA GRAM SKU 92281 For technical questions, please call 1-800-444-3353. P A GE 17 NOTE: Some parts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts. 69: 5MM ALLEN WRENCH NO T SHO WN.
WIRING DIA GRAM SKU 92281 For technical questions, please call 1-800-444-3353. P AGE 18.
An important point after buying a device Harbor Freight Tools 92281 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 92281 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 92281 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 92281 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 92281 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 92281, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 92281.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 92281. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 92281 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
