Instruction/ maintenance manual of the product 92061 Harbor Freight Tools
Go to page of 6
Camping Flashlight Camping Flashlight Camping Flashlight Camping Flashlight Camping Flashlight ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camar illo , CA 93011 Visit our Web site at http://www.harborfreight.com Copyright © 2004 by Harbor Freight Flashlights ® .
SKU 92061 Page 2 For technical questions, please call 1-800-444-3353 Specifications This flashlight is ideal for camping and outdoor use . The 90 degree head angle makes it easy to shine the light ahead while holding the flashlight at a natural angle.
SKU 92061 Page 3 For technical questions, please call 1-800-444-3353 6. Maintain flashlights with care . K eep flashlights maintained and clean for better and safer performance. Follow instructions for maintenance and changing accessories. The handles must be k ept clean, dr y , and free from oil and grease at all times.
SKU 92061 Page 4 For technical questions, please call 1-800-444-3353 cur . It must be understood by the operator that common sense and caution are factors which cannot be built into this product, but must be supplied by the operator . Unpacking When unpacking, chec k to make sure the f ollowing par ts are included.
SKU 92061 Page 5 For technical questions, please call 1-800-444-3353 Select and install the desired lense. 1. The lenses are stored in a compartment at the bottom of the flashlight, under the compass. Open this compartment by turning the cap counterclockwise.
SKU 92061 Page 6 For technical questions, please call 1-800-444-3353 3. In case the bulb burns out, a spare battery is stored in a container at the bottom of the flashlight. Remove the battery by turning the storage container counterclockwise. 4. Remove the Lantern Head by turning it counterclockwise.
An important point after buying a device Harbor Freight Tools 92061 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 92061 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 92061 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 92061 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 92061 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 92061, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 92061.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 92061. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 92061 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
