Instruction/ maintenance manual of the product 92007 Harbor Freight Tools
Go to page of 9
1/4” AIR DIE GRINDER Model 92144 / 92007 ASSEMBL Y AND OPERA TING INSTR UCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www.harborfreight.com TO PREVENT SERIOUS INJUR Y , READ AND UNDERST AND ALL W ARNINGS AND INSTRUCTIONS BEFORE USE.
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the safety w ar nings and precautions, assembly , operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. K eep your in v oice with this manual.
3. Keep bystanders, children, and visitors away while operating a pneumatic tool. Distractions can cause you to lose control. Protect others in the work area from debris such as metal filings and sparks. Provide barriers or shields as needed. PERSONAL SAFETY 1.
2. Do not fo rce the tool. Use the correct tool for y our application. The correct tool will do the job better and safer at the rate for which it is designed. 3. Do not use the power tool if the T rigger does not turn it on or off. An y tool that cannot be controlled with the T r igger is dangerous and must be replaced.
SKU 92144/92007 For technical questions, please call 1-800-444-3353 P AGE 5 3. Use clean, dry , regulated, compressed air at 90 PSI. Do not e xceed the recommended 90 PSI. Never use oxygen, carbon dioxide, combustible gases, or any other bottled gas as a power source for this tool.
SKU 92144/92007 For technical questions, please call 1-800-444-3353 P A GE 6 2. Prior to use, the Die Grinder requires the attachment of a Quick Connector (34) into its Air Inlet (1). T o do so , wrap appro ximately 3” of pipe thread sealer tape (not included) around the male threads of a Quick Connector .
SKU 92144/92007 For technical questions, please call 1-800-444-3353 P A GE 7 GRINDING DRUM (NOT INCLUDED) COLLET (26) WRENCH (24) WRENCH (24) COLLET NUT (25) SPINDLE (27) FIGURE B 5. Connect the air supply hose to the Quick Connector (34) on the Die Grinder .
SKU 92144/92007 For tec hnical questions, please call 1-800-444-3353 P A GE 8 INSPECTION, MAINTENANCE, AND CLEANING 1. W ARNING! Al wa ys make sure the T rig g er (4) is in its “OFF” position, and disconnect the Die Grinder from its compressed air supply before performing any inspection, adjustments, maintenance, or cleaning.
SKU 92144/92007 For tec hnical questions, please call 1-800-444-3353 P A GE 9 P A RTS LIST NOTE: Some parts are listed and shown for illustration purposes onl y , and are not available individually as replacement parts. Part # Description Qt y . Part # Description Qt y .
An important point after buying a device Harbor Freight Tools 92007 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 92007 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 92007 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 92007 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 92007 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 92007, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 92007.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 92007. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 92007 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
