Instruction/ maintenance manual of the product 91959 Harbor Freight Tools
Go to page of 14
RO T AR Y CUL TIV A T OR WITH 5.5 HP BRIGGS & STRA TT ON ® ENGINE Model 91959 ASSEMBL Y AND OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd., Camarillo , CA 93011 Visit our W eb site at: http://www .harborfreight.com TO PREVENT SERIOUS INJUR Y , READ AND UNDERST AND ALL W ARNINGS AND INSTR UCTIONS BEFORE USE.
PR ODUCT SPECIFICA TIONS SA VE THIS MANU AL Y ou will need this manual f or the saf ety w ar nings and precautions, assemb ly , operating, inspection, maintenance and cleaning procedures, par ts list and assembly diagram. K eep y our in voice with this man ual.
3. K eep bystander s, children, and visitors a way while operating a po wer tool. Distractions can cause you to lose control. Protect others in the wor k area from debris such as chips and spar ks. Provide barriers or shields as needed. PERSONAL SAFETY 1.
2. Do not use the power tool if the Engine’ s Thr ottle Control (71) does not turn it on or off. Any gasoline powered tool that cannot be controlled with the Engine’ s Throttle Control is dangerous and must be replaced.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 5 3. Alwa ys use recommended replacement par ts. The recommended replace- ment par ts are availab le from Harbor F reight T ools.
2. K eep the Cultivator and surr ounding area c lean of flammable objects at all times. 3. When spills of fuel or oil occur , they m ust be c leaned up immediately . Dis- pose of fluids and cleaning materials as per any local, state, or f ederal codes and regulations.
properly and perfor m its intended function. Chec k f or alignment and binding of moving parts, any brok en par ts or mounting fixtures, and any other condition that ma y aff ect proper operation. Any par t that is damaged should be proper ly re- paired or replaced by a qualified technician.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 8 CALIFORNIA PR OPOSITION 65 W ARNINGS 1. W ARNING! Operation of this Cultiv ator and/or Engine e xhaust from this product contains chemicals known to the State of Calif ornia to cause cancer , bir th defects, or other reproductiv e har m.
Pre-Star t Chec ks: 1. IMPOR T ANT ! Prior to first using the Cultiv ator , the Engine MUST be filled with a high quality SAE 10W -30 grade engine oil until the le vel of the oil is indicated as “FULL ” on the Oil Dipstick. T o do so , unscre w and remo ve the Oil Dipstick located on the Engine Cr ankcase .
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 10 (to a maximum 11” deep). T o do so , remo v e the two Cotter Pins (39). Remov e the two Pin Shafts (38). Raise or lower the Depth Skid (57) to obtain the desired tilling depth. Then, replace the Pin Shafts and Cotter Pins.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 11 T o Stop The Cultiv ator: 1. Release your g rip on the Clutch Handle (73), and allow it to return to its “NEU- TRAL ” position. (See Figure D.) 2. T ur n the Throttle Control (71) to its “ST OP” position.
SKU 91959 For technical questions please call 1-800-444-3353 P A GE 12 PLEASE READ THE FOLLO WING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIB UT OR HAS PR O VIDED THE P AR TS LIST AND ASSEMBL Y DIA GRAM IN THIS MANU AL AS A REFERENCE T OOL ONL Y .
P AR TS LIST SKU 91959 For technical questions please call 1-800-444-3353 P A GE 13 NO TE: Some par ts are listed and shown f or illustration purposes only , and are not av ailable individuall y as replacement parts. Part # Description Qty. Part # Description Qt y .
ASSEMBL Y DIA GRAM SKU 91959 For technical questions please call 1-800-444-3353 P A GE 14 38 39 27 26 16A1 16A2 NO TE: Some parts are listed and shown for illustration purposes only , and are not availab le idividually as replacement parts.
An important point after buying a device Harbor Freight Tools 91959 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 91959 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 91959 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 91959 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 91959 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 91959, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 91959.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 91959. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 91959 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
