Instruction/ maintenance manual of the product 410r Ryobi
Go to page of 22
410r 2-Cycle Gar den Cultivator OPERA TOR’S MANUAL FOR QUESTIONS, CALL 1-800-345-8746 in U.S. or 1-800-265-6778 in CANADA www.ryobi.com IMPORT ANT MANUAL DO NOT THROW AW A Y.
THANK YOU Thank you for buying this quality product. This modern outdoor power tool will provide many hours of useful service. You will find it to be a great labor-saving device. This operator’s manual provides you with easy-to- understand operating instructions.
3 CALIFORNIA EMISSION REGULA TIONS W ARNING NOTE: For users on U.S. Forest Land and in the states of California, Maine, Oregon and Washington . All U.S.
RULES FOR SAFE OPERA TION 4 DANGER : Failure to obey a safety warning will result in serious injury to yourself or to others. Always follow the safety precautions to reduce the risk of fir e, electric shock, and personal injury . WARNING : Failur e to obey a safety warning can result in injury to yourself and others.
RULES FOR SAFE OPERA TION 5 • Be sure the tines are not in contact with anything before starting the unit. • Avoid accidental starting. Be in the starting position whenever pulling the starter rope. The operator and unit must be in a stable position while starting.
SYMBOL MEANING • WEAR EYE AND HEARING PROTECTION WARNING: Thr own objects and loud noise can cause severe eye injury and hearing loss. W ear eye protection meeting ANSI Z87.
RULES FOR SAFE OPERA TION 7 KNOW YOUR UNIT Tine Guard Tines Gearbox Primer Bulb Choke Control Air Filter/ Muffler Cover Spark Plug Muffler Fuel Cap On/Off Stop Control STOP/OFF (O) START/ON (I) Thrott.
ASSEMBL Y INSTRUCTIONS 8 Fig. 1 Fig. 2 Fig. 3 ASSEMBLING THE UNIT Your yard and garden cultivator has been completely assembled except for the handlebar, throttle cable and wheel bracket assembly. A large phillips screwdriver is needed for assembly. Unpacking 1.
ASSEMBL Y INSTRUCTIONS 9 Fig. 6 Fig. 5 Fig. 7 INST ALLING THE HANDLEBAR 1. Place the handlebar between the bottom and middle clamp pieces (Fig. 4). 2. While holding the three pieces together, position the handlebar underneath the shaft tube and align with the top clamp.
ASSEMBL Y INSTRUCTIONS 10 Fig. 9 Fig. 10 Fig. 11 Fig. 12 Throttle Wire Hole Throttle Wire Slot Fig. 8 THROTTLE CABLE ASSEMBL Y 1. Wrap the throttle wire once around the handlebar (Fig. 8). 2. Depress the throttle trigger and locate hole for the throttle wire (Fig.
OIL AND FUEL INFORMA TION 11 WARNING: Gasoline is extr emely flammable. Ignited V apors may explode. Always stop the engine and allow it to cool before filling the fuel tank. Do not smoke while filling the tank. Keep sparks and open flames at a distance from the ar ea.
ST ARTING/STOPPING INSTRUCTIONS 12 Choke Control Full Choke Position (A) Starter Rope Throttle Control Primer Bulb Fig. 16 ST ARTING INSTRUCTIONS WARNING: A void accidental starting. Be in the starting position when pulling the starter rope (Fig. 16).
T ransporting the Unit WARNING: T o pr event serious personal injury , always stop the engine when operation is delayed or when transporting the unit from one location to another . 1. Stop the engine. 2. Slide the wheel bracket assembly all the way down.
MAINTENANCE AND REP AIR INSTRUCTIONS 14 AIR FIL TER MAINTENANCE Removing the Air Filter/Muffler Cover WARNING: T o avoid serious personal injury , always turn the unit off and allow it to cool before you clean or perform any maintenance on it. 1. Place the choke control in the PARTIAL choke position (B).
MAINTENANCE AND REP AIR INSTRUCTIONS 15 Cleaning the Air Filter WARNING: T o avoid serious personal injury , always turn the unit off and allow it to cool before you clean or perform any maintenance on it. Clean and re-oil the air filter every 10 hours of operation.
MAINTENANCE AND REP AIR INSTRUCTIONS 16 REPLACING THE SP ARK PLUG Use a Champion RDJ7Y spark plug (or equivalent). The correct air gap is 0.020 in. (0.5 mm.). Remove the plug after every 50 hours of operation to check its condition. 1. Stop the engine and allow it to cool.
CLEANING AND STORAGE 17 CLEANING THE UNIT WARNING: T o avoid serious personal injury , always turn the unit off and allow it to cool before you clean or perform any maintenance on it. • Use a small brush to clean off the outside of the unit and to keep the air vents free of obstructions.
TROUBLESHOOTING 18 CAUSE ACTION Old or improperly mixed fuel Drain fuel tank / Add fresh fuel mixture Improper carburetor adjustment Take to an authorized service dealer for carburetor adjustment Cult.
SPECIFICA TIONS 19 Engine T ype . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Air -Cooled, 2-Cycle Displacement . . . . . . . . . . . . . . . . . . . . . . . . . . . .
NOTES 20.
21 The California Air Resources Board and Ryobi Outdoor Products (ROP), are pleased to explain the emission control system warranty on your 1995 and later small off-road engine. In California, new small off-road engines must be designed, built and equipped to meet the State's stringent anti-smog standards.
ALL IMPLIED WARRANTIES ARE LIMITED IN DURATION TO THE TWO (2) YEAR WARRANTY PERIOD OR NINETY (90) DAYS FOR PRODUCTS USED FOR ANY COMMERCIAL PURPOSE. ACCORDINGLY, ANY SUCH IMPLIED WARRANTIES INCLUDING .
An important point after buying a device Ryobi 410r (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Ryobi 410r yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Ryobi 410r - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Ryobi 410r you will learn all the available features of the product, as well as information on its operation. The information that you get Ryobi 410r will certainly help you make a decision on the purchase.
If you already are a holder of Ryobi 410r, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Ryobi 410r.
However, one of the most important roles played by the user manual is to help in solving problems with Ryobi 410r. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Ryobi 410r along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
