Instruction/ maintenance manual of the product 66305 Harbor Freight Tools
Go to page of 16
1000 LB. HYDRAULIC MOT ORCYCLE SER VICE LIFT Model 66305 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
Page 2 SKU 66305 For technical questions, please call 1-800-444-3353. SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
Page 3 SKU 66305 For technical questions, please call 1-800-444-3353. tool. Distractions are able to result in the loss of control of the tool. Personal safety Stay alert. Watch what you are do- a. ing and use common sense when operating the tool. Do not use the tool while tired or under the inu - ence of drugs, alcohol, or medica- tion.
Page 4 SKU 66305 For technical questions, please call 1-800-444-3353. the specic tool model. Use of an accessory not intended for use with the specic tool model, increases the risk of injury to persons. Service T ool service must be performed a.
Page 5 SKU 66305 For technical questions, please call 1-800-444-3353. Do not attempt to manually raise or 9. lower the Lift. Operate the Lift hy- draulically only as described in this manual only . Do not leave Lift unattended with a mo - 10. t or c yc l e o n i t.
Page 6 SKU 66305 For technical questions, please call 1-800-444-3353. attachment (21) into the sleeves welded to the front end of the platform and secure with a pull pin (7) and a R-Pin (20) on either side. Support Leg and Wheel 4. Assemblies: Identify the two support leg/wheel assemblies.
Page 7 SKU 66305 For technical questions, please call 1-800-444-3353. SPECIFICA TIONS Maximum Lifting Capacity 1000 LBS Maximum Lifting Height 32” Off Floor Collapsed Height 7-5/8” Ramp Dimensions 66-3/16” L x 8-3/8” W Maximum Ramp Extension 84-5/8” Long Ramp Inside Width 5-3/4” Wheel Chock Width 5” Ram Diameter 1.
Page 8 SKU 66305 For technical questions, please call 1-800-444-3353. IMPORT ANT COMPONENTS OF THE LIFT Figure 1 Rear Tie-Down Bracket (31) Front Tie-Down Bracket (13) Front Wheel Rest (21) Safety Bar.
Page 9 SKU 66305 For technical questions, please call 1-800-444-3353. OPERA TING INSTRUCTIONS TO PREVENT SERIOUS INJUR Y : Do not adjust or tamper with any control or component in a way not specically explained within this manual. Improper adjustment can result in tool failure or other serious hazards.
Page 10 SKU 66305 For technical questions, please call 1-800-444-3353. When the motorcycle is lifted, be sure 14. that the Safety Bar (75) is slightly above one of the ramps of the Inner Scissor Arm (35). Press the Load Pedal (69) until the 15. Safety Bar (75) is fully engaged with the ramp of the Inner Scissor Arm (35).
Page 1 1 SKU 66305 For technical questions, please call 1-800-444-3353. USER-MAINTENANCE INSTRUCTIONS Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT SERIOUS INJUR Y FROM TOOL F AILURE: Do not use damaged equipment.
Page 12 SKU 66305 For technical questions, please call 1-800-444-3353. OVERALL ASSEMBL Y DIAGRAM 75.
Page 13 SKU 66305 For technical questions, please call 1-800-444-3353. Item # Description QTY 1 Ramp 1 2 Pull Ramp Stand 1 3 End Cap 4 4 Pump Spring 1 5 Nut 2 6 Bolt 2 7 Pull Pin 6 8 Pull Ramp 1 9 Scr.
Page 14 SKU 66305 For technical questions, please call 1-800-444-3353. ASSEMBL Y DIAGRAM FOR HYDRAULIC RAM Note: All parts for the Hydraulic Ram Assembly have an “a” sufx, such as “19a”. Do not confuse these part numbers with the part numbers for the Overall Assembly which are listed on page 13, and have no sufx.
Page 15 SKU 66305 For technical questions, please call 1-800-444-3353. Part Description QTY 1a Ram Cap 1 2a Ram O-Ring 1 3a T op Sealing Gasket 1 4a Ram Assembly 1 5a Ram Gasket 1 6a O-Ring 1 7a Cylin.
Page 16 SKU 66305 For technical questions, please call 1-800-444-3353. Record Product’ s Serial Number Here: Note: If product has no serial number , record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only , and are not avail- able individually as replacement parts.
An important point after buying a device Harbor Freight Tools 66305 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 66305 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 66305 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 66305 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 66305 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 66305, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 66305.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 66305. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 66305 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
