Instruction/ maintenance manual of the product 65836 Harbor Freight Tools
Go to page of 12
PORT ABLE UTILITY PUMP 65836 SET UP AND OPERA TING INSTRUCTIONS Distributed exclusively by Harbor Freight T ools ® . 3491 Mission Oaks Blvd., Camarillo, CA 9301 1 Visit our website at: http://www .harborfreight.com Read this material before using this product.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 2 SA VE THIS MANUAL Keep this manual for the safety warn- ings and precautions, assembly , operat- ing, inspection, maintenance and cleaning procedures.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 3 plugs with grounded power tools. Unmodied plugs and matching out - lets will reduce risk of electric shock. A void body contact with grounded b. surfaces such as pipes, radiators, ranges and refrigerators.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 4 proved for the specic hazards in the work area. Power tool use and care 4. Do not force the power tool. Use a. the correct power tool for your ap- plication. The correct power tool will do the job better and safer at the rate for which it was designed.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 5 • Properly maintain and inspect to avoid electrical shock. • Any power cord must be properly grounded. Ground Fault Circuit Inter- rupter (GFCI) should also be imple- mented – it prevents sustained elec- trical shock.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 6 of electric shock. (See 3-Prong Plug and Outlet.) The grounding prong in the plug is 2.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 7 dition. Always replace a damaged extension cord or have it repaired by a qualied electrician before using it. Protect the extension cords from 8. sharp objects, excessive heat, and damp or wet areas.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 8 SPECIFICA TIONS Electrical Requirements 1 15 V~ / 60 Hz / 8.4 A Pumping Capacity 1500 GPH Max. Inlet & Outlet Size 1” x 1 1.5 TPI (Standard Hose Size) Pump Lift Capacity 120 Feet UNP ACKING When unpacking, check to make sure that the item is intact and undamaged.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 9 T ool Set Up TO PREVENT SERIOUS INJUR Y FROM ACCIDENT AL OPERA TION: T urn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, or cleaning procedures.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 10 MAINTENANCE AND SER VICING Procedures not specically explained in this manual must be performed only by a qualied technician.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 1 1 T roubleshooting Problem Possible Causes Likely Solutions T ool will not start No power at outlet. 1. Cord not connected. 2. Worn out or damaged Carbon 3. Brushes. Check power at outlet.
SKU 65836 For technical questions, please call 1-800-444-3353. Page 12 ASSEMBL Y DIAGRAM.
An important point after buying a device Harbor Freight Tools 65836 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 65836 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 65836 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 65836 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 65836 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 65836, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 65836.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 65836. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 65836 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
