Instruction/ maintenance manual of the product 38391 Harbor Freight Tools
Go to page of 9
12 VOL T JUMP-ST ART AND POWER SUPPL Y 38391 SET UP AND OPERA TING INSTRUCTIONS Visit our website at: http://www .harborfreight.com Read this material before using this product. Failure to do so can result in serious injury . SA VE THIS MANUAL. Copyright © 2009 by Harbor Freight T ools ® .
Page 2 For technical questions, please call 1-800-444-3353. SKU 38391 SPECIFICA TIONS Start Amps 400 Peak Amps 900 Battery 12 V , 17 Ah, Lead-Acid, Rechargeable Charging Current = 0.
Page 3 For technical questions, please call 1-800-444-3353. SKU 38391 Stay alert 10. . W atch what you are doing, use common sense. Do not operate any tool when you are tired.
Page 4 For technical questions, please call 1-800-444-3353. SKU 38391 CONTROLS AND COMPONENTS CHARGING Note: After purchase and before initial use, fully charge the Jump-Start battery until the DC charging LED turns off. W ARNING! The ON/Of f switch (See Figure 1 ) regulates power to the clamps only .
Page 5 For technical questions, please call 1-800-444-3353. SKU 38391 Note: The LED light will go on (when Switch is in the OFF position) to indicate a reverse polarity condition. 12 VDC Charging Note: This system is equipped with a 12 VDC Cigarette Lighter Adapter so you can charge the Jump-Start from a vehicle or boat battery .
Page 6 For technical questions, please call 1-800-444-3353. SKU 38391 If you use the Jump-Start with a power inverter (not included) as a 120 V~ power source, T able 3 will give you approximate times to expect with a fully charged unit.
Page 7 For technical questions, please call 1-800-444-3353. SKU 38391 Recharging Using 12 VDC Supply Insert the Cigarette Lighter Recharger 1. Plug into the Front Panel port labeled Recharge . Insert the other end of the Cigarette 2. Lighter Recharger Cord into the 12 V AC Cigarette lighter receptacle on your vehicle or boat.
Page 8 For technical questions, please call 1-800-444-3353. SKU 38391 PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
Page 9 For technical questions, please call 1-800-444-3353. SKU 38391 LIMITED 90 DA Y W ARRANTY Harbor Freight T ools Co. makes every ef fort to assure that its products meet high quality and durabili.
An important point after buying a device Harbor Freight Tools 38391 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 38391 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 38391 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 38391 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 38391 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 38391, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 38391.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 38391. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 38391 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
