Instruction/ maintenance manual of the product 34313 Harbor Freight Tools
Go to page of 9
EXCESS CARGO CARRIER ASSEMBL Y and OPERA TING INSTRUCTIONS 3491 Mission Oaks Blvd. / Camarillo, CA 9301 1 Copyright © 1997 by Harbor Freight T ools ® . All rights reserved. No portion of this manual or any artwork contained herein may be reproduced in any shape or form without the express written consent of Harbor Freight T ools.
SPECIFICA TIONS SA VE THIS MANUAL Y ou will need the manual for the safety warnings and cautions, assembly instructions, operating procedures, maintenance procedures, trouble shooting, parts list, and diagram . Keep your invoice with this manual. Write the invoice number on the inside of the front cover .
9. DO NOT ABUSE THE POWER CORD. Do not yank it to disconnect it from the receptacle. Do not carry tools by the cord. 10. DO NOT OVERREACH. Keep proper footing and balance at all times. Do not reach over or across running machines. 1 1. MAINT AIN T OOLS WITH CARE.
UNP ACKING If any part s are missing or broken, please call Harbor Freight T ools at the number on the cover of this manual. R e f Item Description Quantity A Receiver Mounting Bar 1 N/ A Hardware Bag.
Step 4: Insert two HEX BOL TS (#E) through the top of the BED FRAME and down through the RECEIVER MOUNTING BAR as shown in Figure 2. Hex Bolts (# E) Nuts (# F) Figure 2 — Inserting Hex Bolts Step 5: Attach a NUT (#F) to each of the HEX BOL TS and tighten.
Step 1: Attach one DET ACHABLE SIDE RAIL to the outside corners of the BED FRAME as shown in Figure 3. Assemble with one BOL T (#G) and one NUT (#H) per corner .
Step 3: Assemble with two BOL TS (#G) and two NUTS (#H) using the holes in the DET ACH- ABLE SIDE RAIL and BED FRAME. T ighten the NUTS. Step 4: Attach a SIDE RAIL BRACE (#C2) to the inside vertical folded edges of the corner of the Carrier Assembly as shown in Figure 5.
Y our Excess Cargo Carrier can be loaded with up to 500 lbs. of cargo. Caution: The load weight must be centered or evenly distributed across the Bed Frame (D). Always use appropriate tie-down restraints to securely attach any cargo loaded onto the Excess Cargo Carrier before moving your vehicle any distance.
ASSEMBL Y DIAGRAM DISCLAIMER PLEASE READ THE FOLLOWING CAREFULL Y THE MANUF ACTURER AND/OR DISTRIBUT OR HAS PROVIDED THE P ARTS DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONL Y .
An important point after buying a device Harbor Freight Tools 34313 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 34313 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 34313 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 34313 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 34313 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 34313, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 34313.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 34313. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 34313 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
