Instruction/ maintenance manual of the product 239 Harbor Freight Tools
Go to page of 4
.
Page 2 For technical questions, please call 1-800-444-3353. Item 00239 Specications T orque Range 20-150 ft-lb Drive 1/2" Length 18" Accuracy ±4% Important Safety Information W ARNING Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in injury .
Page 3 For technical questions, please call 1-800-444-3353. Item 00239 4. Press the socket rmly onto the drive anvil. 5. T urn the Lock Knob at bottom of the Handle counterclockwise until it stops. 6. T urn the handle to set the torque. T o set to 55, for example: a.
Maintenance and Servicing Procedures not specically explained in this manual must be performed only by a qualied technician. TO PREVENT INJUR Y FROM T OOL F AILURE: Do not use damaged equipment. If abnormal noise or vibration occurs, have the problem corrected before further use.
An important point after buying a device Harbor Freight Tools 239 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Harbor Freight Tools 239 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Harbor Freight Tools 239 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Harbor Freight Tools 239 you will learn all the available features of the product, as well as information on its operation. The information that you get Harbor Freight Tools 239 will certainly help you make a decision on the purchase.
If you already are a holder of Harbor Freight Tools 239, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Harbor Freight Tools 239.
However, one of the most important roles played by the user manual is to help in solving problems with Harbor Freight Tools 239. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Harbor Freight Tools 239 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
