Instruction/ maintenance manual of the product UMS 5800 DEC Grundig
Go to page of 39
HIFI STEREO MICRO SY STEM UMS 5800 DEC.
CONTENTS ------------------------------------------------------------------------------------------------ 2 4 SET-UP AND SAFET Y 5 O VERVIEW 5 The hi-fi system controls 9 The hi-fi system displays 1.
CONTENTS ------------------------------------------------------------------------------------------------ 3 ENGLISH 25 CD MODE 25 Selecting the CD input source 26 Inser ting a CD 26 Playing back a CD .
Please note the following information when setting up the system: The hi-fi system is designed for the playback of audio signals. Any other use is expressly pr ohibited. If you w ant to set up t he hi-fi system on wall shelv es or in cupboards, please ensure that it is adequately ventilated.
The hi-fi system controls Controls on the fr ont – I + Adjust the volume. M Switches between the input sources » TUNER «, » CD «, » SD CARD «, » USB « and » AUX « (external device). Infrared sensor for r emote control signals. e II In CD, CARD and USB mode: starts and pauses playback .
O VER VIEW ---------------------------------------------------------------------------------------------- 8 In standby mode: for setting the time and the day of TUNING the week. In tuner mode: press briefly to change the frequency backwar ds in steps.
• Standby indicator . Lights up when the hi-fi system is in standby mode. ON/OFF Switches the hi-fi system to and from standby mode. The only way to completely disconnect the hi-fi system from the mains supply is to pull out the plug. Controls on the t op OPEN 8 Panel.
O VER VIEW ---------------------------------------------------------------------------------------------- The back of t he hifi system FM Antenna Antenna socket for the outdoor antenna cable or the wire antenna supplied (VHF). AM Antenna T erminals for connecting t he MW loop antenna (medium wav e) supplied.
The hi-fi system displays 000:000 In standby mode: displays the time. In tuner mode: displays the preset. In CD mode: displays the total playing time and the elapsed playing time of the current track. In MP3/WMA mode: displays the total number of albums and tracks, and the elapsed playing time of the current track.
O VER VIEW ---------------------------------------------------------------------------------------------- M 1 A file or a track is repeated. M ALL All files or tracks are r epeated M ALBUM In MP3/WMA mode: all files on an album are repeated. INTRO The first ten seconds of each file or track are played.
O VER VIEW ---------------------------------------------------------------------------------------------- ENGLISH 11 The remote control ON/OFF Switches the hi-fi system to standby mode and from standby mode to the last input sour ce selected. SNOOZE Interrupts the alarm function for about five minutes; interrupts the reminder timer .
O VER VIEW ---------------------------------------------------------------------------------------------- – X + Adjust the volume. p Switches the hi-fi speakers to and from mute mode. BAND In tuner mode: selects the frequency band » FM « or » MW «.
INTRO/REP . In standby mode: activates and sav es the ≈ timer settings. In CD, CARD and USB mode: plays the star t of the tracks; repeats one or all tr acks. In MP3/WMA mode: for repeating the tracks on an album. PROG./RAND. In standby mode: activ ates and saves the ¥ time setting.
CONNE CTION AND PREP ARA TION ---- 14 Connecting the ant ennas 1 Plug the roof antenna cable into the antenna socket » FM An- tenna « on the hi-fi system. 2 Inser t the wires fr om t he loop antenna cable supplied into the » AM Antenna « terminals on the hi-fi system.
CONNE CTION AND PREP ARA TION ---- ENGLISH 15 Connecting an MP3 player or a USB memory stic k The hi-fi system supports mos t USB memory s ticks or MP3 play ers. Note: The hi-fi system must be switched off while the USB connection is being made. If it is not switched off, data can be lost.
CONNE CTION AND PREP ARA TION ---- 16 Connecting e xternal devices Note: Switch the hi-fi system off before you connect e xternal devices. 1 Use standard cinch cables to connect the audio output sockets of the external device to the » LINE IN R L « sock ets on the hi-fi.
Setting the time A demo progr am star ts in the display when you connect the hi-fi system to the mains for the first time. To quit the demo pr ogram, switch the hi-fi on from standby mode b y pressing » ON/OFF «. The time and day of the week then flash in the display , indicating that t hey need to be set.
SETTINGS ---------------------------------------------------------------------------------------------------- Setting and storing r adio channels Automatic st ation search (ASP) The first time you switch on the device, the automatic station search in tuner mode looks for the 40 stations with the bes t reception and stores them.
Storing s tations as presets 1 Press » BAND « to select the fr equency band (FM or MW). 2 Press » 8 « or » 9 « to select the station you w ant to store. 3 Press » PROG./RAND. ¥ « to activ ate t he memory function. – Display: the preset displays » 00 « and » PROGRAM « flash.
GENERAL FUNCTIONS ---------------------------------------------------- Switc hing on and off 1 Switch the hi-fi system on from standby mode b y pressing » ON/OFF «. – The last input source used is automatically selected. 2 Press » ON/OFF « to switch the hi-fi system to standby .
Selecting sound effects Y ou can select from the sound effects USER, CL ASSIC, POP , JAZZ and ROCK. The basic setting is USER. 1 Y ou can select sound effects using » DSC «. – Display: » USER «, » CLASSIC X «, » POP C «, » JAZZ V « or » ROCK Y «.
TUNER MODE ------------------------------------------------------------------------------------ Selecting the TUNER in put source 1 Press » M « to select the input source. – Display: » TUNER « briefly , then the frequency . – The most recently selected channel is activated (Last Station Memor y).
Automatic st ation search (ASP) By star ting the automatic station search, you can delete all the existing presets and r eplace t hem with new ones at the same time. 1 T o st art the automatic s tation search in tuner mode, pr ess and hold down » PROG.
TUNER MODE ------------------------------------------------------------------------------------ Viewing RDS information When an RDS channel is being receiv ed, the frequency is displayed briefly and then the s tation name appears continuously . 1 Press » DISPLA Y « on the remote control.
The hi-fi system is suitable for music CDs bearing the logo shown here (CD-D A), and for CD-Rs and CD-RWs with audio data or MP3/WMA formats. In MP3/WMA mode, the terms “album” and “file” are very impor tant. “ Album” corresponds to a folder on a PC, “file” to a file on a PC or a CD-D A track.
CD MODE ---------------------------------------------------------------------------------------------------- Inserting a CD 1 Press the CD compartment on t he top of the hi-fi system to open it. – Display: » OPEN «. 2 Inser t y our CD in the compar tment with its label facing upwar ds.
Selecting a different file or trac k 1 During playback, keep pr essing » 8 « or » 9 « until the number of the file or track you w ant appears in t he display . – Playback of the selected file or track starts automatically . Note: Y ou can also select tracks in stop mode.
CD MODE ---------------------------------------------------------------------------------------------------- Repeating a file or a track (Repeat One) 1 Press » INTRO/REP . ≈ « repeatedly during playback until » M 1 « appears in the display . – The file or track is play ed back repeatedly .
Playing t he introductions of files or tracks (Intr o) 1 Press » INTRO/REP . ≈ « when in stop mode. – Display: » INTRO «. – Playback star ts automatically . The first ten seconds of each file or track are play ed. 2 T o quit t he function, press » INTR O/REP.
CD MODE ---------------------------------------------------------------------------------------------------- Playing back a tr ack memor y 1 Star t the track memory by pressing » e II «. – Display: » PROGRAM «. – Playback begins with the first programmed file or tr ack .
For MP3/WMA mode with MMC/SD memory card, an MP3 player or USB memor y stick, the same playback functions are available as for CD mode (see pages 26 to 30).
MMC/SD AND USB MODE -------------------------------------- Notes: The USB interface of t his device is a standar d interface. All currently known MP3 chip concepts w ere taken into account when it was de veloped.
Y our hi-fi system has three timer modes: – The switch-on timer , which switches the hi-fi system on at the set time and wak es you with an alarm or music. – The r eminder timer (NAP), reminding you b y sounding the signal tone at a preset time.
TIMER MODE ---------------------------------------------------------------------------------------- 7 Press » INTRO/REP . ≈ « to finish t he settings. – Display: » § « or » e «, the day of t he week and the time. – The hi-fi system switches on at the set time with t he selected signal source (maximum alarm duration 90 minutes).
Reminder timer 1 Press » NAP « to select the function. – Display: » NAP 10 « (minimum time setting), » NAP « flashes. 2 Enter the reminder time (in 1 0 minute inter vals fr om 1 0 to 1 20 minutes) with » NAP «. – Display: » NAP «. – After t he set time has e xpired, a signal tone sounds (for max.
INFORMA TION ------------------------------------------------------------------------------ 36 Cleaning the CD unit If the device is unable to scan CDs perfectly , use a s tandard, commercially av ailable cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics.
INFORMA TION ------------------------------------------------------------------------------ ENGLISH 37 General information on laser devices This device is a CLASS 1 L ASER PRODUCT. This means that the laser is designed in such a way as to ensur e that the maximum permissible emission value cannot be e xceeded under any circumstances.
INFORMA TION ------------------------------------------------------------------------------ 38 Environmental note This product has been made fr om high-qualit y par ts and materials which can be re-used and recycled. Therefore, do not thr ow the product away with normal household waste at the end of its ser vice life.
Grundig Multimedia B.V . Atrium, Strawinskylaan 3 1 05 • NL-1 077 ZX Amsterdam • http://www .grundig.com 08/33.
An important point after buying a device Grundig UMS 5800 DEC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grundig UMS 5800 DEC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grundig UMS 5800 DEC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grundig UMS 5800 DEC you will learn all the available features of the product, as well as information on its operation. The information that you get Grundig UMS 5800 DEC will certainly help you make a decision on the purchase.
If you already are a holder of Grundig UMS 5800 DEC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grundig UMS 5800 DEC.
However, one of the most important roles played by the user manual is to help in solving problems with Grundig UMS 5800 DEC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grundig UMS 5800 DEC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
