Instruction/ maintenance manual of the product cirflexx UMS 5400 DEC Grundig
Go to page of 37
ǵ HIFI MICRO SYSTEM Cirflexx UMS 5400 DEC DEUTSCH ENGLISH FRANÇAIS IT ALIANO PORTUGUÊS ESP AÑOL.
2 CONTENTS ____________________________________________ 3 Set-up and safety Environmental note 4 Overview The hi-fi system controls The hi-fi system displays The back of the hi-fi system The remote co.
ENGLISH 3 Please note the following information when setting up the system: The hi-fi system is designed for the playback of audio signals. Any other use is expressly prohibited. If you want to set up the hi-fi system on wall shelves or in cupboards, please ensure that it is adequately ventilated.
4 The hi-fi system controls Controls on the fr ont General information ON/OFF Switches the hi-fi off and to standby mode. The only way to fully disconnect the hi-fi from the mains supply is to pull the plug out. O Infrared sensor for remote control signals.
ENGLISH 5 CD mode CD/ ı II Starts and pauses CD play- back. s s In MP3 and CD-DA mode: press briefly to select the next file or the next track; hold down to search for a particular passage. § In MP3 and CD-DA mode: press briefly to select the previous file or the previous track; hold down to search backwards for a particular passage.
6 Controls on the top General information PROG./ For setting the time RAND./ Ȅ manually . INTRO/ For setting the REPEA T/ ѕ switch-on timer . UBS Switches the Ultra Bass System on and off. T uner mode PROG./ Press and hold down to RAND./ Ȅ start the automatic station search; press briefly to stop the search; saves radio channels as presets.
ENGLISH 7 Using external storage media SD/MMC Card slot for inserting a memor y card (SD or MMC) (under the panel). USB USB interface for connecting a USB removeable disc ( MP3 player or USB memor y stick) under the panel. Not suitable for connecting to a PC.
8 The hi-fi system displays 000:000 In standby mode: displays the time. In tuner mode: displays the preset channel. In MP3 mode: displays the total number of albums and files, and the elapsed playing time of the current file. In CD-DA mode: displays the total number of tracks, and the elapsed playing time of the current track.
ENGLISH 9 PROG In tuner mode: a stored radio channel is selected or played. In MP3 and CD-DA mode: a track memor y is created or played back. ɳ In tuner mode: an FM stereo channel is being received. AM Displays the first half of the day in 12-hour format.
10 The back of the hi-fi system FM Antenna socket for the ANTENNA rooftop antenna or the wire antenna supplied. MW Antenna socket for ANTENNA connecting the MW frame antenna supplied. R AUX IN L Audio signal input for an external device. SPEAKER Connections for the loud- R +/– L +/– speakers supplied.
ENGLISH 11 The remote control ON/OFF Switches the hi-fi system to standby mode and from standby mode to the last input source selected. ı II In MP3 and CD-DA mode: starts and pauses CD playback. 7 In MP3 and CD-DA mode: interrupts and stops playback of a CD; deletes the track memor y of a CD.
12 DISPLA Y In tuner mode: switches the display between frequency , channel name, channel type, radio text and time/day . In CD-DA mode: switches the display between track number/elapsed playing time, remaining track playing time, total remaining running time and time/day .
ENGLISH 13 Connecting the antennas 1 Plug the rooftop antenna cable into the » FM ANTENNA « antenna socket on the hi-fi. Note: If no rooftop antenna is available, use the auxiliar y antenna supplied. This antenna provides reasonably good reception of local FM (VHF) channels.
14 Inserting batteries in the remote control 1 Open the batter y compartment by pushing down its lid. 2 When inserting the batteries (2 x 1.5 V , R 6/UM 3/AA), obser ve the polarity marked on the base of the batter y com- partment. Note: If your hi-fi system no longer reacts properly to remote control commands, the batteries may be flat.
ENGLISH 15 Inserting a memor y card The hi-fi player supports SD and MMC memor y cards. 1 Switch off the hi-fi system. 2 Insert the card carefully into the card slot » SD/MMC « (under the panel on top of the hi-fi), with the contacts facing to the rear until it latches in place.
16 Setting the time A demo programme starts when you connect the hi-fi system to the mains for the first time. T o end the demo programme switch the hi-fi system to standby by pressing » ON/OFF « briefly . Now the time and day displays will flash, indicating that they need to be set.
ENGLISH 17 Setting and storing radio channels Automatic station search (ASP) The automatic station search looks for the 40 stations with the best reception and stores them. 1 Start the automatic search in tuner mode by pressing and holding down » PROG.
18 Storing stations as presets 1 Press » TUNER/BAND « to select the frequency band (FM or MW). 2 Press » c TUNING/ALBUM x « to select the station you want to store. 3 Press » PROG./RAND./ Ȅ « to activate the memor y function. – Display: the preset displays » 00 « and » PROG « flash.
ENGLISH 19 Switching on and off 1 Switch the hi-fi system on from standby mode by pressing » ON/OFF «. – The last input source used is automatically selected. 2 Press » ON/OFF « to switch the hi-fi system to standby . – Display: » GOOD BYE « briefly , then the current time and day of the week.
20 Selecting sound effects Y ou can select from the sound effects USER, CLASSIC, POP , JAZZ and ROCK. The basic setting is USER. 1 Y ou can select sound effects using » DSC «. – Display: » USER «, » CLASSIC X «, » POP C «, » JAZZ V « or » ROCK Y «.
ENGLISH 21 Selecting the TUNER input source 1 Press » FUNCTION « to select the input source. – The most recently selected channel is activated (Last Station Memor y). – Display: e.g. » FM 100.60 « or » ENERGY «. Selecting a preset channel 1 Press » BAND « to select the frequency band (FM or MW).
22 RDS station service RDS (Radio Data System) is an information system which is transmit- ted additionally by most FM stations. When the hi-fi system is receiving an RDS channel, the channel name, for example » FANTASY «, and » f « appear in the dis- play .
ENGLISH 23 Programme types (PTY) 1 To view the current programme type, press » PTY « on the remote control. – Display: the current programme type, e.g. » NEWS «, » PTY « flashes. – If no programme type code is transmitted, » NO PTY « appears in the display .
24 The hi-fi system is suitable for music CDs bearing the logo shown here (CD-DA), and for CD-Rs and CD-RWs with audio data or MP3 formats. In MP3 mode, the terms “album” and “file” are ver y important. “Album” corresponds to a folder on a PC, “file” to a file on a PC or a CD-DA track.
ENGLISH 25 Inserting a CD 1 Press » OPEN/CLOSE « on the top of the hi-fi system to open the CD compartment. – Display: » OPEN «. 2 Place the CD in the compartment with the printed side facing outwards. 3 Press » OPEN/CLOSE « on the top of the hi-fi system to close the CD compartment.
26 Selecting a different file or track 1 During playback, keep pressing » 5 a « or » s 6 « until the number of the file or track you want appears in the display . – Playback of the selected file or track starts automatically . Note: Y ou can also select files/tracks in stop mode.
ENGLISH 27 Repeating a file or a track (Repeat One) 1 Press » ı II « to star t playback. 2 Press » 5 a « or » s 6 « to select the file or track. 3 Select the repeat function by pressing » INTRO/REP ./ ѕ « until » M 1 « appears in the display .
28 Playing back files or tracks in random order (Random) 1 Press » ı II « to star t playback. 2 Press » PROG./RAND./ Ȅ « to select the function. – Display: » RANDOM «. – The files or tracks on the CD are played back in random order . 3 To quit this function, press » PROG.
ENGLISH 29 Creating a track memory Y ou can create a track memor y of up to 60 files on different albums (MP3) or up to 60 tracks (CD-DA) for the current CD in any order you choose and then play them back in that sequence. A file or track may be stored more than once.
30 Checking the track memory 1 Press » PROG./RAND./ Ȅ « repeatedly when in stop mode. – The sequence of the stored files or tracks is displayed. Adding files or tracks 1 In the stop position, select the file or track with » 5 a « or » s 6 « and press » PROG.
ENGLISH 31 Playing the contents of a memory card 1 Insert the memor y card carefully into the card slot » SD/MMC « (under the panel on top of the hi-fi), with the contacts facing to the rear . 2 Switch on the hi-fi and use » FUNCTION « to select » SD CARD « as the input source.
32 Y our hi-fi system has three timer modes: – The switch-on timer , which switches the hi-fi system on at the set time and wakes you with an alarm or music. – The reminder timer , reminding you by sounding the signal tone at a preset time. – The sleep timer , which switches the hi-fi system of f at a preset time.
ENGLISH 33 9 Press » INTRO/REP ./ ѕ « to finish the settings. – Display: » e « or » ɷ «, the day and time. – The hi-fi system switches on at the set time with the selected signal source (maximum alarm duration 90 minutes).
34 Reminder timer 1 Press » NAP « to select the function. – Display: » NAP 10 « (minimum time setting), » NAP « flashes. 2 Enter the reminder time (in 10 minute inter vals from 10 to 120 minutes) with » NAP «. – Display: » NAP «. – After the set time has expired, a signal tone sounds (for max.
ENGLISH 35 Cleaning the CD unit If the device is unable to scan CDs perfectly , use a standard, com- mercially available cleaning CD to clean the laser optics. Other cleaning methods may damage the laser optics. To clean CDs use a lint-free cloth and wipe them in a straight line from the centre of the disc outwards.
36 General information on laser devices Y our system is a CLASS 1 LASER PRODUCT . This means that the laser is designed in such a way as to ensure that the maximum permissible emission value cannot be exceeded under any circumstances.
Grundig Multimedia B.V . Atrium, Strawinskylaan 3105 • NL-1077 ZX Amsterdam • http://www .grundig.com.
An important point after buying a device Grundig cirflexx UMS 5400 DEC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grundig cirflexx UMS 5400 DEC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grundig cirflexx UMS 5400 DEC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grundig cirflexx UMS 5400 DEC you will learn all the available features of the product, as well as information on its operation. The information that you get Grundig cirflexx UMS 5400 DEC will certainly help you make a decision on the purchase.
If you already are a holder of Grundig cirflexx UMS 5400 DEC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grundig cirflexx UMS 5400 DEC.
However, one of the most important roles played by the user manual is to help in solving problems with Grundig cirflexx UMS 5400 DEC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grundig cirflexx UMS 5400 DEC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
