Instruction/ maintenance manual of the product Model G8027 Grizzly
Go to page of 32
1 H P D U S T C O L L E C T O R MO DE L G8 02 7 I N S T R U C T I O N M A N U A L COPYRIGHT © MAY, 2005 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
T able of Con t en ts INTRODUCTION ............................................................................................................................... 2 Foreword .............................................................................
-2- G8027 1 HP Dust Collector If you have any comments regarding this manual, please write to us at the address below: Grizzly Industrial, Inc. C / O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 We stand behind our machines.
G8027 1 HP Dust Collector -3- Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MODEL G8027 1 HP DUST COLLECTOR Design Type ................................................................................ Single Stage Floor Model Overall Dimensions: Base .
-4- G8027 1 HP Dust Collector 1. Upper Bag Support Rod 2. Filtration Bag 3. Collector 4. Collection Bag 5. Collection Bag Support Rod Identi f ic at io n 6. Base Plate 7. Swivel Casters 8. Impeller Housing Support 9. ON/OFF Switch 10. Motor 2 3 8 4 6 7 5 1 9 10 Figure 1.
G8027 1 HP Dust Collector -5- 4. ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage. 5. WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts.
-6- G8027 1 HP Dust Collector 7. ONLY ALLOW TRAINED AND PROP- ERLY SUPERVISED PERSONNEL TO OPERATE MACHINERY. Make sure operation instructions are safe and clearly understood. 8. KEEP CHILDREN AND VISITORS AWAY. Keep all children and visitors a safe dis- tance from the work area.
G8027 1 HP Dust Collector -7- 6. AVOIDING FIRES. DO NOT allow steel to strike against impeller, which may pro - duce a spark. Sparks can smolder in wood dust for a long time before fire or flame is detected.
-8- G8027 1 HP Dust Collector Figure 2 . T ypical typ e 5 - 1 5 plug and rece ptacle. Serious p ersonal injury could occur if you connect the machine to t he power sourc e before you hav e compl eted the set up pro - cess . DO NOT connect th e machine to th e power source until instructe d to do so.
G8027 1 HP Dust Collector -9- Your machine left our warehouse in two care- fully packed boxes. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent.
-10- G8027 1 HP Dust Collector After all the parts have been removed from the two boxes, you should have the following items: Box Compo nents ( Figure 3 ) Qt y A. Motor/Impeller Housing .............................. 1 B. Collector ...................
Hard w are Recogn iti on Ch ar t.
-12- G8027 1 HP Dust Collector Components and Hardware Needed: Qty Motor/Impeller Housing ...................................... 1 Collector .............................................................1 Base ..........................................
G8027 1 HP Dust Collector -13- 5. Install the rubber gasket onto the motor/ impeller housing opening . 6. Install the collector onto the motor/impeller housing with six M6-1 x 15 hex bolts, as shown in Figure 8 . Figure 8. Installing collector onto motor/impeller housing.
-14- G8027 1 HP Dust Collector Col lectio n and F i ltr at io n Ba gs Components and Hardware Needed: Qty Collection Bag .................................................... 1 Filtration Bag ......................................................1 Bag Clamps .
G8027 1 HP Dust Collector -15- Ge ne ra l The Model G8027 is designed to be a single- machine dust collector. Locate the dust collec - tor where it will not interfere with the workpiece being processed, and no more than 10' of ducting is used, otherwise the CFM will be reduced.
-16- G8027 1 HP Dust Collector Ensure that the entire system is grounded. If using plastic blast gates to direct air flow, the grounding wire must be jumped ( Figure 15 ) around the blast gate without interruption to the grounding system. Figure 15. Ground jumper wire when using plastic blast gates or elbows and metal duct.
G8027 1 HP Dust Collector -17- Once assembly is complete and adjustments are done to your satisfaction, you are ready to test run the machine. Turn on the power supply at the main panel. Turn the dust collector ON . Make sure that your finger is poised on the toggle switch just in case there is a problem.
-18- G8027 1 HP Dust Collector SE CTION 5 : A C C E SS ORI E S Figure 19. Our most popular safety glasses. G7984—Face Shield H1298—Dust Sealed Safety Glasses H1300—UV Blocking, Clear Safety Glasses H2347—Uvex ® Spitfire Safety Glasses H0736—Shop Fox ® Safety Glasses Safety Glasses are essential to every shop.
G8027 1 HP Dust Collector -19- G2525—Dust Collection Basics This incisive book skillfully guides the wood - work er t hrough all the steps necessar y in the design and co nstructio n of an effi cient cen - tral dust collec tion system and tells you what you need to know for easy installation.
-20- G8027 1 HP Dust Collector Since all bearings are shielded and permanently lubricated, simply leave them alone until they need to be replaced. DO NOT lubricate them. Regular periodic maintenance on your Model G8027 Dust Collector will ensure its optimum performance.
G8027 1 HP Dust Collector -21- To empty the collection bag: 1. Make sure you are wearing a respirator and the dust collector is unplugged. 2. Un-clamp the collection bag and empty it.
-22- G8027 1 HP Dust Collector SYMPTO M POS SI BLE CAUSE CORR ECTI VE ACTI ON Motor wi ll not st ar t , o r it growl s on st ar t up . 1 . Power su ppl y fuse or c irc uit br eaker has tr ipp ed. 2. T o gg le swit ch is b roken in sid e . 3. Star t c apa cito r i s at fault .
G8027 1 HP Dust Collector -23- Elect r ica l Com pon en ts and Wir in g 1 1 0 V Po we r Cord Ground (Green) Motor Black Wire Motor Wires ON / OFF Switch GREEN(GROUND) TO 110 VOLT POWER CORD Disc onne ct powe r be fore perf ormi ng any elec tric al serv ice.
-24- G8027 1 HP Dust Collector 33 25 41 23 41 24 2 3 2 30 27 28 29 1 3 5 4 40 13 20 40 39 26 38 18-4 18 35 17 16 34 13 40 21 19 14 7 6 9 8 10 13 12 11 36 31 22 3 32 29 5 18-1 42 43 47 45 46 44 48 U N .
REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P8027001 SWIVEL CASTER 23 P8027023 COLLECTOR 2 PS20M PHLP HD SCR M5-.8 X 15 24 P8027024 COLLECTION BAG 3 PW02M FLAT WASHER 5MM 25 P8027025 FILTRATION BAG 4 P8027004 BASE PLATE 26 PWRCRD110L POWER CORD 5 PS09M PHLP HD SCR M5-.
W AR RANT Y AND RETU RNS -26- G8027 1 HP Canister Dust Collector Grizzly Industr ial, Inc. warrants ev ery prod uct it sells for a period of 1 year to the original purchaser from the date of purchase.
CUT ALONG DOTTED LINE Name _____________________________________________________________________________ Street _____________________________________________________________________________ City _____.
TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here Name_____________________________.
.
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! -OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website T oday And .
An important point after buying a device Grizzly Model G8027 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly Model G8027 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly Model G8027 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly Model G8027 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly Model G8027 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly Model G8027, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly Model G8027.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly Model G8027. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly Model G8027 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
