Instruction/ maintenance manual of the product G8143 Grizzly
Go to page of 16
COPYRIGHT © MAY, 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC. PRINTED IN CHINA ONLINE MANUAL DISCLAIMER THE INFORMATION IN THIS MANUAL REPRESENTS THE CONFIGURATION OF THE MACHINE AS IT IS CURRENTLY BEING SHIPPED.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
G8143 Collet Closer -1- Safety Instructions For Metalworking Machines METALWORKING EQUIPMENT SAFETY INSTRUCTIONS 5. KEEP CHILDREN AND VISITORS AWAY . All children and visitors should be kept at a safe distance from work area. 6. MAKE WORK SHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.
G8143 Collet Closer -2- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
G8143 Collet Closer -3- To begin assembly, follow these initial safety instructions. 1. Disconnect the lathe from the power source! 2. Remove the chuck or any other device that is mounted to the spindle.
Figure 4 . Installing hub adapter. Figure 3 . Installing hub adapter. G8143 Collet Closer -4- Figure 2. Hub separation. Pivot Connector 3. Install the half of the hub adapter with the setscrews onto the outboard spindle shaft shown in Figure 3 . 4. Tighten all three setscrews.
G8143 Collet Closer -5- Figure 8 . Rotating collet in spindle to engage with adjusting hub. 2. Place the collet in the collet adapter, so the collet threads are exposed out of the back end of the collet adapter as shown in Figure 7 . Figure 7 . Collet in collet adapter.
Figure 11. Completed collet closer assembly. G8143 Collet Closer -6- 2. Please note that the rod connector is sup- plied with jam nuts. It may be necessary to remove these nuts to allow for the proper fit of the assembly on some lathes. 3. Install the handle to the yoke.
G8143 Collet Closer -7- Locking Stroke To adjust the locking stroke on your collet closer: 1. Position the locking pawls so they are in the correct position on the cam as shown in Figure 12 .
To adjust your 5-C collet in the collet closer assembly: 1. Choose a 5-C collet that is suitable for the intended stock size to be turned. 2. Line up the collet keyway with the collet adapter pin and insert the collet until it stops, then gently rotate it for final alignment.
G8143 Collet Closer -9- If rough adjustments need to be made to the collet closer assembly: 1. In the event that the previous adjustments fail to allow the collet to lock onto the mater- ial or the draw tube fails to touch the collet, adjust the adapter hub in or out.
G8143 Collet Closer -10- 1 6 36 2 4 31 30 6 7 8 9 12 13 16 17 10 11 5 3 27 28 29 23 24 25 38 37 22 21 19 18 15 14 32 33 34 20 G8143 Collet Closer.
G8143 Collet Closer -11- 1 PSS01M SETSCREW M6-1 X 10 2 P4026033 SPANNER NUT M30-1.25 W/ SS 3 P4026009 DOGPOINT SETSCREW M8-1.25 X 38 4 P4026007 LOCKING YOKE 5 PN03M HEX NUT M8-1.25 6 P4026034 SPANNER NUT M30-1.25 7 P6208 CARTRIDGE BALL BEARING 6208ZZ 8 P4026023 BEARING SUPPORT 9 P4026024 CAM 10 PN04M HEX NUT M4-0.
Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, neg- ligence, accidents, repairs or alterations or lack of maintenance.
WARRANTY CARD NAME_______________________________________________ PHONE NUMBER___________________ STREET________________________________________________________________________________ CITY___________.
G8143 Collet Closer FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_________.
An important point after buying a device Grizzly G8143 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G8143 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G8143 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G8143 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G8143 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G8143, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G8143.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G8143. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G8143 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
