Instruction/ maintenance manual of the product G8120 Grizzly
Go to page of 2
In tr od uc ti on This straight handle metal shear is highly maneu- verable for working into tight spots. It cuts sheet steel up to 3 ⁄ 64 " thick and sheet aluminum up to 1 ⁄ 16 " thick. Width of cut is 7 ⁄ 32 ". The no-load speed is 2500 strokes per minute and average air con - sumption is 6 CFM.
G8 1 20 Pa r ts Break do wn and Li st .
An important point after buying a device Grizzly G8120 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G8120 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G8120 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G8120 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G8120 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G8120, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G8120.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G8120. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G8120 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
