Instruction/ maintenance manual of the product G7209 Grizzly
Go to page of 52
14'' PROFESSIONAL CABINET SAW MODEL G7209 AND G7210 INSTRUCTION MANUAL COPYRIGHT © 1999 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
TABLE OF CONTENTS PAGE 1. SAFETY SAFETY RULES FOR POWER TOOLS ................................................................2-3 ADDITIONAL SAFETY INSTRUCTIONS FOR TABLE SAWS ................................4 SAFETY ACCESSORIES ......................
-2- G7209/10 14'' Table Saw SECTION 1: SAFETY Safety Instructions For Power Tools 5. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys.
G7209/10 14'' Table Saw -3- 9. USE PROPER EXTENSION CORD . Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate.
-4- G7209/10 14'' Table Saw Additional Safety Instructions For Table Saws 1. ALWAYS use blade guard, splitter and anti-kickback fingers on all ''through-saw- ing'' operations. Through-sawing opera- tions are those when the blade cuts com- pletely through the workpiece as in ripping or crosscutting.
G7209/10 14'' Table Saw -5- Push Sticks The use of push sticks, particularly when cutting small or narrow workpieces, provides a double benefit for saw operators. The push stick pro- vides added leverage, enabling the operator to keep the workpiece firmly supported against the fence and table.
-6- G7209/10 14'' Table Saw Push Paddles Push paddles provide added leverage and sup- port when ripping or crosscutting wide work- pieces. Grizzly offers a number of push paddles in the Grizzly catalog. See Figure 3. Featherboard Easily made from scrap stock, featherboards provide an added degree of protection against kickback.
G7209/10 14'' Table Saw -7- Common Definitions, Terms and Phrases The following is a list of common definitions, terms and phrases used throughout this manual as they relate to this table saw and woodworking in general. It is important that you read and become familiar with them before assembling, adjusting or operating this machine.
-8- G7209/10 14'' Table Saw SECTION 2: CIRCUIT REQUIREMENTS 220V Single-Phase 220V Three-Phase G7209 Only: The Model G7209 has a 5 H.P., 3450 R.
G7209/10 14'' Table Saw -9- We do not recommend the use of extension cords on 220V equipment. It is much better to arrange the placement of your equipment and the installed wiring to eliminate the need for extension cords. Should it be necessary to use an extension make sure the cord is rated Hard Service (grade S) or better.
-10- G7209/10 14'' Table Saw SECTION 3: INTRODUCTION We are proud to offer the Grizzly Model G7209/10 14" Table Saw. The Model G7209/10 is part of a growing Grizzly family of fine woodworking machinery.
G7209/10 14'' Table Saw -11- Unpacking The Model G7209/10 is shipped from the manu- facturer in a carefully packed carton. If you dis- cover the machine is damaged after you’ve signed for delivery, immediately call Customer Service for advice.
-12- G7209/10 14'' Table Saw Clean up The table and other unpainted parts of the Model G7209/10 are coated with a waxy grease that protects them from corrosion during shipment. Clean this grease off with a solvent cleaner or cit- rus-based degreaser such as Grizzly’s G7895 Degreaser.
G7209/10 14'' Table Saw -13- SECTION 4: ASSEMBLY Beginning Assembly Most of your Model G7209/10 has been assem- bled at the factory, but some parts must be assembled or installed after delivery. We have organized the assembly process into steps.
-14- G7209/10 14'' Table Saw Figure 7. Using tape to shim for wing alignment. Masking Tape 5. Raise or lower the rear of the wing until the wing and table are flush. Tighten the bolt. Any adjustment at this point should be mini- mal. 6. Check flushness at the front bolt and read- just if necessary.
G7209/10 14'' Table Saw -15- Guard Support Shaft 4. Attach the square fence tube to the front rail using the hex bolts and lock washers sup- plied. See Figure 10A. 5. Attach the fence and slide across the length of the rails to ensure smooth, accurate fence movement.
-16- G7209/10 14'' Table Saw 2. Set a machinist’s square against the face of the blade guard/splitter. Slightly rotate the rear bracket to adjust the face of the blade guard perpendicular to the table top as shown in Figure 13. Figure 12. Blade guard and splitter in place.
G7209/10 14'' Table Saw -17- Figure 16. Proper splitter/blade alignment. Adjusted rear splitter Added washers Proper Alignment Front Support Bracket Adjustment Screws 8.
-18- G7209/10 14'' Table Saw Figure 18. Setscrew on each corner of insert. Table Insert The table insert provides access to the blade and arbor when removed. When in place, the insert provides support for materials being cut. 1. Disconnect the power cord from the outlet.
G7209/10 14'' Table Saw -19- SECTION 5: ADJUSTMENTS Blade Height Blade Tilt 1. Set your blade angle at zero as shown on the angle indicator on the front of the saw and raise the blade several inches above the table. 2. Place a machinist’s square flat on the table and slide it along side the blade.
-20- G7209/10 14'' Table Saw Figure 22. Adjusting blade to miter slot after rotating blade 180° and sliding square down miter slot. Figure 23. Table mounting bolt holes. Table Mount Holes 5. The difference between the two measure- ments must be equal to or less than 1 ⁄ 64 ".
G7209/10 14'' Table Saw -21- Figure 24. Figure 25. #1 #2 #3 #4 Blade tilted to 45° #1 #2 #3 #4 Blade tilted to 45° 10. Refer to Figures 24 and 25, for shim place- ment. If the distance of A is longer than B, shim(s) will need to be placed under corners #1 and #2.
-22- G7209/10 14'' Table Saw Rip Fence The rip fence included with your Model G7209/10 14" Table Saw is designed to provide excellent ripping accuracy when properly adjusted. There are three main adjustments to concern yourself with: square, parallelism and clamping pressure.
G7209/10 14'' Table Saw -23- Blade Alignment The blade position can be adjusted slightly in case it contacts the table insert when raised or tilted. This adjustment can be made by moving the table, the whole trunnion assemble, or by just moving the arbor bracket.
-24- G7209/10 14'' Table Saw To adjust the blade position by moving the arbor bracket: 1. Disconnect plug from power source. 2. Remove the table and wings and set them to one side. 3. Loosen the blade adjustment cap screw shown in Figure 30B.
G7209/10 14'' Table Saw -25- Pre-Run Check Test Run 1. Face the table saw and stand to the left of the blade path. 2. With one finger on the START button and one finger on the STOP button, turn the saw on. Be ready to turn it off in case of mishap.
-26- G7209/10 14'' Table Saw 4. If anything appears abnormal, immediately turn off the saw and fix the problem. If a problem exists that is beyond the scope of this manual, call our service department.
G7209/10 14'' Table Saw -27- Figure 34. Plywood blade. 4. Plywood Blade: Used for cutting plywood or veneers. A 14" plywood blade will have 80+ teeth, a steep alternate top bevel tooth pro- file and very shallow gullet. See Figure 34. 5.
-28- G7209/10 14'' Table Saw Ripping Ripping means to cut with the grain of the wood. In other materials such as MDF or plywood, rip- ping simply means to cut lengthwise. To rip a board: 1. Inspect the board for soundness. You will need a straightedge to rip with accuracy.
G7209/10 14'' Table Saw -29- Dado Operations In addition to its ability to rip and crosscut lumber, the table saw is also an invaluable tool for creat- ing a variety of dadoes. These non-through cuts can be created with a regular saw blade or with specially-designed stacking or wobbling dado blades.
-30- G7209/10 14'' Table Saw Dadoing operations can also be accomplished using a conventional saw blade. To create a sin- gle-blade dado: 1. Clearly mark the width of the dado cut on your workpiece. Include marks on the edge of your workpiece so you can clearly identify your intended cut while the material is laying flat on the saw table.
G7209/10 14'' Table Saw -31- 2. Ensure that the saw is switched off and dis- connected from its power source. 3. Remove the table insert, splitter guard and the regular saw blade from the arbor. 4. Attach and adjust the dado blade system as recommended in the dado blade’s instruc- tions.
-32- G7209/10 14'' Table Saw SECTION 7: MAINTENANCE V-Belt To ensure optimum power transmission from the motor to the blade, the V-belts must be in good condition and operate under proper tension. When replacing V-belts, it is important to replace all four at the same time - even if they do not all appear worn.
G7209/10 14'' Table Saw -33- Figure 43. Lubricate these areas. The shielded ball bearings in the motor and throughout the Model G7209/10 require no fur- ther lubrication during their lifetime. When they do wear out, replacements can be obtained through the Grizzly Parts Department.
-34- G7209/10 14'' Table Saw The following pages contain general machine data, troubleshooting guide, parts diagram, parts list and Warranty/Return information for your Model G7209/10 Table Saw.
G7209/10 14'' Table Saw -35- Customer Service #: (570) 546-9663 • To Order Call: (800) 523-4777 • Fax #: (800) 438-5901 MACHINE DATA SHEET Design Type ......................................................................................
-36- G7209/10 14'' Table Saw Design Type .................................................................................................... Tilting Arbor Overall Dimensions: With Wings and Fence Rails ......................................
G7209/10 14'' Table Saw -37- 5 HP Magnetic Switch -NHD Type MOTOR SINGLE-PHASE 220 VOLT POWER SOURCE GROUND 2 4 30 3 6 Disconnect power from machine before performing any electrical service. Failure to do this will result in a shock hazard leading to injury or death.
-38- G7209/10 14'' Table Saw 7-1/2 HP Magnetic Switch -NHD Type MOTOR THREE-PHASE 220 VOLT POWER SOURCE GROUND ©G i l Id ilI MR i 16 22 28 Disconnect power from machine before performing any electrical service. Failure to do this will result in a shock hazard leading to injury or death.
101 128A 131 133 132 116 115 130 126 335 111 109 108 102 103 153A 118 123 138 114 141 137 142 140 138 143 139 144 409 410 405 408 401 404 411 401 402 106 152 107 122 153 110 117 125 80 81 406 403 330 .
208 231 220 225 221 218 223 219 222 224 230 209 210 216 217 211 212 213 229 228 227 226 208A.
14 15 77 57 56 58 60 65 3 3 66 33 31 56 59 16 2 27 15 78 14 7 38 8 6 5 9 39 40 41 30 44 47 48 29 45 43 50 52 78 54 55 51 53A 11 32 31 83 41 10 4.
69 70 74 75 25 28 61 17 18 1 21 19 20 68 22 24 28 26 24 23 23 72 62 24 62A 62B.
306 303 310 311 304 302 206 215 214 204 202 203 206 205 201 207 233 301 308.
-44- G7209/10 14'' Table Saw 002 P7209002 BUSHING 003 P7209003 BUSHING 004 P7209004 ARBOR NUT 1" 005 P7209005 BLADE FLANGE 1" 006 P7209006 ARBOR ADAPTER 1" 007 P7209007 ARBOR 008 P6006 BALL BEARING 6006 009 PSB31M CAP SCREW M8-1.
G7209/10 14'' Table Saw -45- 148 P7209148 SPACER 149 PLW06M LOCK WASHER 10MM 150 PN02M HEX NUT M10-1.5 151 PSS03M SET SCREW M6-1.0 X 8 152 P7209152 DADO INSERT 153 P7209153 MOTOR 153A KEY 8 X 8 X 30 201 P7209201 FRONT RAIL 202 P7209202 BACK RAIL 203 P7209203 SQUARE TUBE 204 P7209204 TAPE SCALE 205 PB03M HEX BOLT M8-1.
-46- G7209/10 14'' Table Saw SYMPTOM Motor will not start. Motor will not start; fuses or circuit breakers blow. Motor overheats. Motor stalls (resulting in blown fuses or tripped cir- cuit). Machine slows when oper- ating. Loud, repetitious noise com- ing from machine.
G7209/10 14'' Table Saw -47- PUSH STICK MAKE FROM 1 ⁄ 2 '' OR 3 ⁄ 4 '' WOOD OR THICKNESS LESS THAN WIDTH OF MAT'L TO BE CUT CAUTION USE ONLY GOOD STRONG WOOD OR .
-48- G7209/10 14'' Table Saw Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
G7209/10 14'' Table Saw -49- CUT ALONG DOTTED LINE 10. Which benchtop tools do you own? Check all that apply. ___1" x 42" Belt Sander ___6" - 8" Grinder ___5" - 8&qu.
Place Stamp Here FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 TAPE ALONG EDGES--PLEASE DO NOT STAPLE Name_____________________________.
An important point after buying a device Grizzly G7209 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G7209 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G7209 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G7209 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G7209 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G7209, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G7209.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G7209. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G7209 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
