Instruction/ maintenance manual of the product G1060 Grizzly
Go to page of 22
22'' SCROLL SAW MODEL G1060 INSTRUCTION MANUAL COPYRIGHT © 1992 BY GRIZZLY IMPORTS, INC. REG.# TX 3 300 229 WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY IMPORTS, INC.
.
G1060 22'' Scroll Saw -1- Table Of Contents PAGE 1. SAFETY ....................................................................................................................2 SAFETY RULES FOR ALL TOOLS .....................................
-2- G1060 22'' Scroll Saw WARNING: For Your Own Safety, Read Instruction Manual Before Operating Scroll Saw Safety Instructions For Power Tools These safety rules cannot cover every situation in a work shop. Consider your conditions when setting up or operating your scroll saw.
G1060 22'' Scroll Saw -3- Additional Safety Instructions For Scroll Saws 16. REDUCE THE RISK OF UNINTENTIONAL STARTING. Make sure switch is in off posi- tion before plugging in. 17. USE RECOMMENDED ACCESSORIES. Consult the owner’s manual for recommend- ed accessories.
Figure 1. Grounded Outlet Box Current Carrying Prongs Grounding Blade Is Longest Of the Three Blades Improper connections of the electrical-grounding conductor can result in risk of electric shock. The conductor with green or green and yellow striped insulation is the electrical-grounding conductor.
G1060 22'' Scroll Saw -5- Grizzly Imports, Inc. is proud to offer the Model G1060 22'' Scroll Saw. The G1060 is part of Grizzly’s growing family of fine woodworking and metalworking machinery. When used according to the guidelines stated in this manual, you can expect years of trouble-free, enjoyable operation.
-6- G1060 22'' Scroll Saw Unpacking The Model G1060 22'' Scroll Saw is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call Customer Service immediately for advice.
G1060 22'' Scroll Saw -7- Clean up The working table for the G1060 is coated with a waxy oil that protects them from corrosion during shipment. Remove the protective coating with mineral spirits and paper towels. Do not use gasoline or other petroleum based solvents because of their extremely low flash points.
-8- G1060 22'' Scroll Saw SECTION 4: ASSEMBLY Safety Shield The only real assembly required for your scroll saw is to attach the safety shield to the support post. 1. Slide the mounting clip over the threaded end of the mounting rod and secure with wing nut provided.
G1060 22'' Scroll Saw -9- Changing Blades SECTION 5: ADJUSTMENTS 1. Remove Safety Shield assembly. 2. Remove Table Insert and flip open Chuck Guards. Figure 3. 3. Mount Blade in Chucks. This can be done with the help of the Chuck Holder, located on the right edge of the table.
-10- G1060 22'' Scroll Saw Blade Tension 1. Turn the Blade Tension Adjustment Knob clockwise to tighten, counterclockwise to loosen. Figure 5. Proper tension is difficult to quantify, but as you turn the knob clockwise, you will notice when the blade initially begins to tighten.
G1060 22'' Scroll Saw -11- Safety Shield Always wear safety glasses. The Safety Shield included with your Scroll Saw should be used as additional protection for your face and eyes should the blade snap or material be ejected from the blade area toward your head.
-12- G1060 22'' Scroll Saw SECTION 6: OPERATIONS Once assembly is complete and adjustments are done to your satisfaction, you are ready to test the machine. Turn on the power supply at the main panel. Press the START button. Make sure that your fin- ger is poised on the STOP button, just in case there’s a problem.
G1060 22'' Scroll Saw -13- Curved Cuts 1. Scribe a curved line on your workpiece with a sharp pencil or scratch awl. 2. Adjust Hold-down Foot as for straight cut- ting. 3. Maintaining a slow, even pressure, feed the workpiece into the blade.
-14- G1060 22'' Scroll Saw Inside Cuts Inside cuts such as circles or the insides of closed letters can be easily cut with your Scroll Saw by threading the blade through the workpiece’s closed loop from the bottom and remounting the blade in the chucks.
G1060 22'' Scroll Saw -15- SECTION 7: MAINTENANCE Lubrication Lubricate the upper and lower guide arm bush- ings once a month. Light machine oil will be ade- quate. Damage to the motor may result if the bushings are allowed to run dry. Regular periodic maintenance on your Model G1060 Scroll Saw will ensure its optimum perfor- mance.
-16- G1060 22'' Scroll Saw The following pages contain general machine data, parts diagrams/lists, troubleshooting guide and warranty/return information for your Model G1060 22'' Scroll Saw.
G1060 22'' Scroll Saw -17- MACHINE DATA GRIZZLY MODEL G1060 22 " SCROLL SAW Design Type .................................................................................................................... .... Bench Model Capacities: Maximum Cutting Width .
42 41 28 27 78 5 45 44 22 3 26 36 36A 11 35 34 9 10 24 13 25 3 26 8 1 72 76 7 67 67 40 25 2 4 29 31 52 52 29 31 33 32 37 66 67 65 67 64 63 51 50 6 6 41 47 46 49 30 43 12 14 70 23 57 59 28 74 68 58 56 .
G1060 22'' Scroll Saw -19- REF PART # DESCRIPTION REF PART # DESCRIPTION 01 P1060001 BASE 02 PSB07M CAP SCREW M8-1.25 X 24MM 03 PLW04M LOCK WASHER 8MM 04 P1060004 MOTOR 05 P1060005 ROCKER ARM 06 PSS02M SETSCREW M6-1.
-20- G1060 22'' Scroll Saw Grizzly Imports, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, neg- ligence, accidents, repairs or alterations or lack of maintenance.
An important point after buying a device Grizzly G1060 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G1060 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G1060 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G1060 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G1060 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G1060, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G1060.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G1060. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G1060 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
