Instruction/ maintenance manual of the product G0560 Grizzly
Go to page of 44
MEAT-CUTTING BANDSAW MODEL G0560 INSTRUCTION MANUAL COPYRIGHT © DECEMBER, 2003 BY GRIZZLY INDUSTRIAL, INC. WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF GRIZZLY INDUSTRIAL, INC.
WARNING Some dust created by power sanding, sawing, grind- ing, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • Lead from lead-based paints.
Table of Contents SECTION 1: SAFETY ........................................................................................................................2 Safety Instructions for Power Tools .........................................................
-2- G0560 Meat-Cutting Bandsaw 5. KEEP CHILDREN AND VISITORS AWAY. All children and visitors should be kept at a safe distance from work area. 6. MAKE WORKSHOP CHILD PROOF with padlocks, master switches, or by removing starter keys. 7. DO NOT FORCE TOOL.
G0560 Meat-Cutting Bandsaw -3- 9. USE PROPER EXTENSION CORD. Make sure your extension cord is in good condi- tion. Conductor size should be in accor- dance with the chart below. The amperage rating should be listed on the motor or tool nameplate. An undersized cord will cause a drop in line voltage resulting in loss of power and overheating.
-4- G0560 Meat-Cutting Bandsaw Bacteria from raw meat has been frequently linked to illness and even death! Describing proper meat handling techniques outside of cleaning the bandsaw is beyond the scope of this manual.
G0560 Meat-Cutting Bandsaw -5- Grizzly Industrial, Inc. is proud to offer the Model G0560 Meat-Cutting Bandsaw. This machine is part of Grizzly’s growing family of fine machinery. When used according to the guidelines stated in this manual, you can expect years of trouble-free, enjoyable operation.
-6- G0560 Meat-Cutting Bandsaw The Model G0560 features a 110/220V 3 ⁄ 4 HP motor that is prewired at 110V. Amperage Draw 110V (prewired) ...........
G0560 Meat-Cutting Bandsaw -7- Electrocution or a fire can result if the machine is not grounded correct- ly. Make sure all electri- cal circuits are ground- ed. DO NOT use the machine if it is not grounded. If you find it necessary to use an extension cord with this machine: • Only use a cord that is rated for standard ser- vice (Grade S).
-8- G0560 Meat-Cutting Bandsaw 1. Adjustable Blade Guard 2. Blade Guide 3. Sliding Table 4. Small Cutting Fence 5. ON/OFF Switch 6. Large Cutting Fence 7.
G0560 Meat-Cutting Bandsaw -9- This machine left our warehouse in a carefully packed crate or box. If you discover the machine is damaged after you have signed for delivery, please immediately call Customer Service at (570) 546-9663 for advice. Save the containers and all packing materials for possible inspection by the carrier or its agent.
-10- G0560 Meat-Cutting Bandsaw Figure 5. Table, fence and grinder pieces. Figure 6. Motor, drive belt, and switch pieces. Figure 4. Stand pieces. Table, Fence and Grinder Pieces ( Figure 5 ) L. Table ..................................................
G0560 Meat-Cutting Bandsaw -11- Hardware Recognition Chart.
-12- G0560 Meat-Cutting Bandsaw Unsupervised children and visitors could cause serious personal injury to them- selves with this machine. Choose a site for placement in your shop where you can safely lock visitors and chil- dren away when you are not with them.
G0560 Meat-Cutting Bandsaw -13- Components and Hardware Needed: Qty Rubber Feet ......................................................4 Feet Bracket ......................................................4 Hex Bolt M6-1 x 20 ...........................
-14- G0560 Meat-Cutting Bandsaw Figure 12. Switch & cord installed on stand. Components and Hardware Needed: Qty Switch ................................................................1 Switch Cover ................................................
G0560 Meat-Cutting Bandsaw -15- Figure 13. Motor mounted to motor mount. Components and Hardware Needed: Qty Motor ..................................................................1 Hex Bolt M8-1.25 x 20 ........................................4 Hex Nut M 8-1.
-16- G0560 Meat-Cutting Bandsaw Before you put on the V-belt, make sure that the motor pulley and the upper pulley are reasonably aligned. To do this, loosen the setscrew on the motor pulley, adjust the motor pulley so it is in-line with the upper pulley, then tighten the setscrew.
G0560 Meat-Cutting Bandsaw -17- Stand Covers Figure 18. Catch tab in place on stand cover. Components and Hardware Needed: Qty Tap Screws #6 x 3 ⁄ 8 " ........................................12 Catch Tabs .......................................
-18- G0560 Meat-Cutting Bandsaw Figure 21. Installing rails on table. The sliding table allows you to move the blade through the meat. Components and Hardware Needed: Qty Sliding Table ......................................................1 Rail .....
G0560 Meat-Cutting Bandsaw -19- Figure 23. Securing rails in the sliding table. Figure 22. Installing force plate. 4. Secure the rails to the end of the table using the knob screws as shown in Figure 23 . 2. Slide the bandsaw blade through the slot in the sliding table and place the table on the rollers.
-20- G0560 Meat-Cutting Bandsaw Figure 25. Fence supports to table. Figure 26. Fences assembled. Figure 27. Fences installed on supports. The fences allow you to support the meat as you slide it through the blade while also controlling the thickness of cut.
G0560 Meat-Cutting Bandsaw -21- Meat Grinder The Model G0560 comes with a meat grinder. Before assembling this for use, clean and sanitize its parts. See Section 5: Sanitation for details on sanitizing. Figure 28 shows the meat grinder components. Figure 28.
-22- G0560 Meat-Cutting Bandsaw Damage to your eyes and ears could result from using this machine without proper pro- tective gear. Always wear safety glasses and hearing protection when operating this machine. The Model G0560 is operated by an ON/OFF paddle switch that is clearly labeled on the side of the stand.
G0560 Meat-Cutting Bandsaw -23- Blade Tension The bandsaw blade must be adequately ten- sioned so that it will cut straight and not fall off the wheel during operation.
-24- G0560 Meat-Cutting Bandsaw Changing Blades In the event that you need to change blades or remove the current blade for cleaning purposes, follow the instructions below: 1. Disconnect the machine from the power source! 2. Remove the force plate from the end of the table.
G0560 Meat-Cutting Bandsaw -25- The support bearing backs the blade during oper- ation. As mentioned in the “Blade Guard” instruc- tions, the blade guide assembly (with the support bearing) should be lowered to within an inch from the material you are cutting to be most efficient.
-26- G0560 Meat-Cutting Bandsaw NOTICE The following section was designed to pro- vide a basic understanding of the types of items that can be cut with the meat-cutting bandsaw. This manual is in no way a guide to cutting meat, dressing animals or safe meat handling techniques.
G0560 Meat-Cutting Bandsaw -27- This bandsaw can cut your fingers off or cause other bodily harm. Use a wooden push stick when cutting small pieces and always properly support any item you cut. The meat grinder can easily grind your fingers. Never use your fingers to push meat into the grinder.
-28- G0560 Meat-Cutting Bandsaw Cleaning the Saw Figure 39. Pieces disassembled for cleaning. To clean your bandsaw after use: 1. Remove the table, the blade guards, the fences, and the meat grinder ( Figure 39 ). 2. If used, disassemble the meat grinder ( Figure 40 ).
G0560 Meat-Cutting Bandsaw -29- Proper Sanitation All surfaces and working parts that have been exposed to meat must be properly sanitized after each use.
-30- G0560 Meat-Cutting Bandsaw Regular periodic maintenance on your Model G0560 Meat-Cutting Bandsaw ensures its opti- mum performance. Make a habit of inspecting your bandsaw each time you use it. Check for the following conditions and repair or replace when necessary.
G0560 Meat-Cutting Bandsaw -31- The following pages contain the machine data sheets, wiring diagram, parts diagrams, parts lists, and the Warranty/Return information for the Model G0560. If you need parts or help in assembling your machine, or if you need operational information, call the Grizzly Service Department.
-32- G0560 Meat-Cutting Bandsaw Design Type .................................................................................................... Floor Model Overall Dimensions: Table ....................................................................
G0560 Meat-Cutting Bandsaw -33- G0560 Wiring Diagram.
-34- G0560 Meat-Cutting Bandsaw 2 3 3 81 80 57 52 57 56 41 78 73 77 4 76 63 28 59 62 61 64 60 14 20 3 29 8 31 22 21 24 23 30 65 69 66 32 33 13 26 25 34 74 70 43 38 88 83 84 85 86 44 39 42 71 48 58 20 14 13 3 49 53 35 87 40 79 5 17 19 18 12 11 6 72 46 8 67 1 46 68 46 50 55 ALWAYS REMOVE MEAT GRINDER WHEN NOT IN USE.
G0560 Meat-Cutting Bandsaw -35- REF PART # DESCRIPTION REF PART # DESCRIPTION 49 PFB01M Flange Bolt M6-1 X 12 50 P0560050 Lower Guide Seat 51 PW03M Flat Washer 6mm 52 P608ZZ Ball Bearing 608ZZ 53 PB07M Hex Bolt M8-1.25 X 25 55 P0560055 Clamping Luge 56 P0560056 Blade Guide Block 57 P0560057 Star Knob M6-1 X 12 58 P0560058 Star Knob M8-1.
-36- G0560 Meat-Cutting Bandsaw REF PART # DESCRIPTION REF PART # DESCRIPTION 113 PS01 Phlp Hd Scr 10-24 X 1 ⁄ 2 114 PS22 Phlp Hd Scr 10-24 X 5 ⁄ 8 115 P0560115 Motor Pulley 116 P0560116 Switch Plate 117 P0560117 L Type Set Plate 118 P0560118 Side Cover 119 P0560119 Rubber Pad 120 PN03M Hex Nut M8-1.
G0560 Meat-Cutting Bandsaw -37- REF PART # DESCRIPTION REF PART # DESCRIPTION 216 PS14M Phlp Hd Scr M6-1 X 12 217 PFB08M Flange Bolt M5-.8 X 10 218 PR57M Int Retaining Ring 22mm 219 P608ZZ Ball Bearing 608ZZ 220 PCB12M Carriage Bolt M6-1 X 12 221 PFN02M Flange Nut M6-1 222 PW03M Flat Washer 6MM 223 PFH07M Flat Hd Screw M5-.
-38- G0560 Meat-Cutting Bandsaw Grizzly Industrial, Inc. warrants every product it sells for a period of 1 year to the original purchaser from the date of purchase. This warranty does not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
CUT ALONG DOTTED LINE ___Other__________________________________________________ 9. How many of your woodworking machines are Grizzly? _____________ 10.
TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE FOLD ALONG DOTTED LINE GRIZZLY INDUSTRIAL, INC. P.O. BOX 2069 BELLINGHAM, WA 98227-2069 Place Stamp Here Name_____________________________.
.
Buy Direct and Save with Grizzly ® – Trusted, Proven and a Great Value! -OR- • SECURE ORDERING • ORDERS SHIPPED WITHIN 24 HOURS • E-MAIL RESPONSE WITHIN ONE HOUR Visit Our Website T oday And .
An important point after buying a device Grizzly G0560 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G0560 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G0560 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G0560 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G0560 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G0560, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G0560.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G0560. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G0560 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
