Instruction/ maintenance manual of the product G0456 Grizzly
Go to page of 48
MO DE L G0 4 56 V A RIA B L E S P E ED W OO D L A TH E O WNER'S MANU A L COPYRIGHT © N O VEM BER, 20 05 BY GRIZ ZL Y I NDUSTRIAL , INC. REVISED JANUAR Y , 2 007 . W AR NI NG : NO PO RT IO N OF TH IS M AN UAL M A Y B E REPR ODU CED I N ANY S HAPE OR FOR M W IT HO UT TH E WRI T T EN APPROV AL OF G RI Z ZL Y IN DU STR IA L , IN C.
Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again.
T able of Con ten ts INTRODUCTION ............................................................................................................................... 3 Foreword ..............................................................................
SECTION 7: SERVICE ................................................................................................................... 30 Troubleshooting .................................................................................................
G04 56 V ariable Speed Wood Lathe -3 - If you have any comments regarding this manual, please write to us at the address below: Grizzly Industrial, Inc. C / O Technical Documentation Manager P.O. Box 2069 Bellingham, WA 98227-2069 We stand behind our machines.
- 4- G0 456 V ariable Speed Wood L athe .
G04 56 V ariable Speed Wood Lathe -5 - Figure 1. Identification of main components. A. Miter Gauge B. 12" Sanding Disc C. Headstock D. Spindle E. Spur Center F. Bed G. Tool Rest H. Tool Rest Base Lock I. Tool Rest Height Adjustment Lock J. Tailstock Identi fi cat ion A B K.
- 6 - G04 56 V ariable Speed Wood Lathe 4. ALWAYS USE HEARING PROTECTION WHEN OPERATING MACHINERY. Machinery noise can cause permanent hearing damage. 5. WEAR PROPER APPAREL. DO NOT wear loose clothing, gloves, neckties, rings, or jewelry which may get caught in moving parts.
G04 56 V ariable Speed Wood Lathe - 7 - 7. ONLY ALLOW TRAINED AND PROP- ERLY SUPERVISED PERSONNEL TO OPERATE MACHINERY. Make sure operation instructions are safe and clearly understood. 8. KEEP CHILDREN AND VISITORS AWAY. Keep all children and visitors a safe dis- tance from the work area.
-8- G04 56 V ariable Speed Wood Lathe A ddit io nal S af et y f or W ood L ath es 9. WORKPIECE CONDITION. Always inspect the condition of your workpiece. DO NOT turn pieces with knots, splits, and other potentially dangerous conditions. Make sure joints of glued-up pieces have high quality bonds and won't fly apart during operation.
G04 56 V ariable Speed Wood Lathe -9 - Serious p ersonal i njur y could occur if you connect the machine to the power source before you have c ompleted the s et up pr o - cess . D O N OT conne ct the machine to the power source until instructed to do so.
- 1 0 - G0 456 V ariable S peed W ood L athe The Model G0 456 was carefully packed when it left our warehouse. If you disc ov er the machine is damaged af ter you hav e sig ned for d eliv er y , please im mediately call Cu stomer Service at ( 5 70) 546 -9 66 3 for advice.
G04 56 V ariable Speed Wood Lathe - 1 1 - In v ent or y After all the par ts have b een remov ed from the crate , you should hav e the following items: Inv entor y Compo nents ( Figure 3 ) Qt y A . Lathe Bed (not shown) ...............................
- 1 2- G0456 V ariable S peed W ood L athe Figure 4. Minimum working clearances. Fl oor Loa d Refe r to the Machine D ata S heet for the weight and footprint spe cifi cation s of your machine. Some resid ential floors ma y require additional reinfo rcement to suppor t both the machine and operator .
G04 56 V ariable Speed Wood Lathe - 1 3 - Mou n tin g L athe The lathe be d and stand are separated for s hip- ping safety purposes. W e recommend positioning the st and in the final loc ation for the lathe befor e mounting the lathe bed. L -brack ets are also pro - vided for floor mounting.
- 1 4- G04 56 V ariable Spee d W ood L athe Sand i ng T able Compone nts and Hard ware Ne ede d : Qt y Sanding T able .................................................... 1 T able Br acke ts ................................................... 2 Dust Port .
G04 56 V ariable Speed Wood Lathe - 1 5 - Figure 9. Dust hose attached to dust port. Dus t Col lecti on Recomm ended C FM at Dust Por t : 1 0 0 CFM Do not c onfuse this CFM r e comme ndation with the rating of the du st c olle ctor .
- 1 6 - G04 56 V ariable Spee d W ood L athe Damag e to your eyes, lungs, and ear s could re su lt f ro m us ing th is m ac hin e w it ho ut prope r p rotective g ear . Alwa ys wea r safe ty glasses , a re spirator , and hearing protection when op erating this machine.
G04 56 V ariable Speed Wood Lathe - 1 7 - The tailstock is equipped with a cam-action clamping system to secure it to the lathe bed. When the lever is tightened, a locking plate lifts up and secures the tool rest to the bed. To position the tailstock along the bed: 1.
- 1 8 - G0456 V ariable Speed Wood Lathe Ins tal l in g / Remo v in g Spu r Cent er The spur center installs in the headstock spindle with a taper fit. T o prev ent rusting, we recommend removing cen - ters when not in use and coating the tapers with a light la yer of lubric ant or metal protectant.
G04 56 V ariable Speed Wood Lathe - 1 9 - To remove the live center: 1. Turn the handwheel counterclockwise until the tailstock quill bottoms out, causing the center to be forced out of the quill. The tailstock quill lock handle must always be locked down while the lathe is in use.
-20- G 0456 V ariable Speed Wood Lathe Selecti ng T ur ni ng T ool s Lathe tools come in a variety of shapes and siz es and usually fall into five major categories.
G04 56 V ariable Speed Wood Lathe - 21 - Spindle turning ( Figur e 2 2 ) is the operation per - formed when a workpie ce is mounted bet ween the headstock and the tailstock.
-22- G0456 V ariable Spee d W ood L athe 9. Position the tool rest approximately 1 ⁄ 4 " away from the workpiece and approximately 1 ⁄ 8 " above the center line, as shown in Figure 25 . 10. Test the setup by hand-turning the workpiece to make sure there is enough clearance all the way around before starting.
G04 56 V ariable Speed Wood Lathe -23- 4. Thread the faceplate onto the headstock spindle and tighten securely. Note : If scre ws cannot be placed in the wor kpiec e, then a backing b lock can be glued to the wor kpiec e and attached to the fac eplate with screws.
-2 4- G 0456 V ariable Speed Wood L athe The disc sander accepts 12" diameter cloth or paper-backed PSA sanding discs, which are available through Grizzly (see Page 28 ). The sanding disc sticks to the surface of the cast iron disc, using the pressure sensitive adhesive backing (PSA) on the reverse side of the sandpa - per disc.
G04 56 V ariable Speed Wood Lathe -25- The most efficient way to get a perfect miter is to cut the workpiece slightly long and sand it to the desired dimension. Use the miter gauge to hold the workpiece at the desired angle. To perform miter sanding operations: 1.
-26- G0 456 V ariable Speed Wood L athe SE CTION 5 : A CC ESS ORIE S ACCESSORIES G1194—3-Jaw Chuck A "must ha ve " for the serious w ood turner . This 3 -jaw c huck is a self-c ente ring st yle chuck used mostly for round work. All three jaw s tighten together at the same time.
G04 56 V ariable Speed Wood Lathe - 27 - Figure 37. Mod el H6542 Robe rt Sorby 8-PC Set . H6542—Robert Sorby HSS 8-PC Turning Set If quality is king, then start bowing. Made in England, these Robert Sorby lathe tools are espe - cially for the perfectionist wood turner.
-28- G04 56 V ariable Speed Wood Lathe Figure 41. Model H1223 woodturning book. H1 223 —Woodturning, A Foundation C ourse K eith Rowle y's best selling introduc tion to the ar t of wood turning is ex ceptio nal for its friendly and methodical approach, building u p the reader's skills and c onfidence by logic al and progressive steps.
G04 56 V ariable Speed Wood Lathe -29- Alwa ys disconne ct p ower to t h e m ac hin e b efo r e per forming maintenance. Failure to do this m ay result in s erious p erson - al injury . SE CTION 6 : MA INTEN ANC E Cleaning the Mo del G 0456 is relatively easy .
-3 0 - G04 56 V ariable Speed Wood Lathe Revie w the troubleshooting and procedures in this section to fix y our machine if a problem de velops. If y ou need replacement parts or you are unsure of you r repair skills, then feel free to c all our T echnical Suppor t at ( 57 0) 54 6 -96 63.
G04 56 V ariable Speed Wood Lathe -3 1 - SYMPTO M POS SI BLE CA US E CORR ECTI VE ACTIO N Workpiece vibrates exces- sively. 1. Workpiece mounted incorrectly. 2. Workpiece warped, out of round, or is flawed. 3. Spindle speed is set too fast for mounted workpiece.
-32- G045 6 V ariable Speed Wood Lathe A misaligned hea dstock will not give you ac curat e results and may be dangerous. This procedure takes approximat ely 3 0 minutes to co mplete and requires you to remov e and disc ard the s andpa - per disc if it is installed.
G04 56 V ariable Speed Wood Lathe -33 - A loose or damaged V-belt will not adequately transfer po wer from the mo tor to the spindle. This procedure takes approximat ely 30 minutes to complete a nd requires you t o remo ve and discard the sand paper disc if it is installed.
-3 4- G0 456 V ariable S peed W ood L athe The Model G04 56 feat ures a DC motor , which uses heavy- dut y car bon brushes. While these brushes are designed for extended life , they will ev entually wear out, c ausing a los s of p ow er or faulty star ting.
G04 56 V ariable Speed Wood Lathe -35 - When the table tilt is set to 0˚, the table should be adjusted perpendicular to the sanding disc face. T ools N ee ded Qt y Try-Square or Machinist's Square ..................... 1 To adjust table tilt: 1 .
-3 6 - G0456 V ariable Speed Wood Lathe Figure 53. Table aligned with sanding disc. 1 ⁄ 16 " Gap 2. Align the table so that there is approximately a 1 ⁄ 16 '' gap between the 12" disc and the table ( Figure 53 ). 3. Tighten the bolts loosened in Step 1 .
G04 56 V ariable Speed Wood Lathe -37 - Elect ri cal Com ponen ts Power Cord Motor Cord Speed Sensor Wire ON/OFF Paddle Switch Motor Control Board Digital Display Circuit Board.
-3 8- G0 456 V ariable Speed Wood L athe .
G04 56 V ariable Speed Wood Lathe -39 - .
- 40 - G0 456 V ariable Sp eed W ood L athe REF PART # DESCRIPTION REF PART # DESCRIPTION 1 P0456001 BED 56 P0456056 HANDWHEEL HANDLE 2 P0456002 CABINET STAND 57 P0456057 TOOL REST BASE 3 PSB147M CAP SCREW 7/16-14 X 1-1/2 58 P0456058 TOOL REST 4 PW06 FLAT WASHER 1/4 59 P0456059 LOCK HANDLE M8-1.
G04 56 V ariable Speed Wood Lathe - 4 1 - Safety labels warn about machine hazards and ways to prevent injury. The owner of this machine MUST maintain the original location and readability of the labels on the machine. If any label is removed or becomes unreadable, REPLACE that label before using the machine again.
- 42 - G0 456 V ariable S peed W ood L athe Grizzly Industrial, Inc. warrants ev er y produc t it sells for a period of 1 year to the original purchaser from the date of purc hase. This warranty do es not apply to defects due directly or indirectly to misuse, abuse, negligence, accidents, repairs or alterations or lack of maintenance.
.
.
.
.
An important point after buying a device Grizzly G0456 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly G0456 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly G0456 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly G0456 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly G0456 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly G0456, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly G0456.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly G0456. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly G0456 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
