Instruction/ maintenance manual of the product C1367 Grizzly
Go to page of 2
INSTRUCTIONS FOR C1367 FINGER JOINT BIT The primary purpose of the Model C1367 router bit is to create extended lengths of 3 ⁄ 4 " thick lumber by allow- ing the user to match and connect shorter lengths end-to-end. If handled carefully, clean, good-looking joints can be made which will stand up well to inspection.
© May 2003 Grizzly International, Inc. 525503622 cut, turn the second board back over and check the fit of the joint. The two halves of the joint should fit tightly with no spaces in the fingers, and with the two faces perfectly even.
An important point after buying a device Grizzly C1367 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grizzly C1367 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grizzly C1367 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grizzly C1367 you will learn all the available features of the product, as well as information on its operation. The information that you get Grizzly C1367 will certainly help you make a decision on the purchase.
If you already are a holder of Grizzly C1367, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grizzly C1367.
However, one of the most important roles played by the user manual is to help in solving problems with Grizzly C1367. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grizzly C1367 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
