Instruction/ maintenance manual of the product BUDGETONE BudgeTone-200 Grandstream Networks
Go to page of 33
BudgeTone-200 SIP Phone User Manual Updated – 01/2008.
Grandstream Networks, Inc. BT200 User Manual Page 2 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 TABLE OF CONTENTS BT200 USER MANUAL WELCOME ............................... ................................ ................................ ...........
Grandstream Networks, Inc. BT200 User Manual Page 3 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Table 8: Key Pad Configuration Menu . ................... ............... ................... ............... ................... .. 1 9 Table 9: Device Configuration - Status .
Grandstream Networks, Inc. BT200 User Manual Page 4 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Welcome Thank you for pur chasing Grandstream BudgeTone-200 IP Phone.
Grandstream Networks, Inc. BT200 User Manual Page 5 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Installation W HAT IS I NCLUDE D IN THE P ACKAGE The BudgeTone-200 phone package contains: 1. One BudgeTone -200 Main Case 2. One Handset 3. One Phone Cord 4.
Grandstream Networks, Inc. BT200 User Manual Page 6 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 2. Put the handset on the base. 3. Connect attached LAN cable to the L AN port of the phone. 4. Connect attached power supp ly first to the 5V power port of the phone.
Grandstream Networks, Inc. BT200 User Manual Page 7 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Product Overvie w The following photo illustrates the appearance of a BudgeTone-2 00 IP phone. Figure 3: BT200 Front View Figure 4: BT200 Side View Table 2: BT200 Key Features in a Glan ce Features Benefits Open Standards Compatible Support SIP 2.
Grandstream Networks, Inc. BT200 User Manual Page 8 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Advanced Functionality Custom down-loadable rin g-tones, SRTP, SIP over TLS (pending), multi-language supp ort and adjustable positionin g angles, wall mountable, AES encr yption.
Grandstream Networks, Inc. BT200 User Manual Page 9 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Support NAT traver sal using IETF STUN and Symmetric RTP Support for IEEE 802.
Grandstream Networks, Inc. BT200 User Manual Page 10 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Using the GXP SIP Enter prise Phone G ETTING F AMILIAR WITH THE LCD BT200 phone has a numeric LCD of 64mmx24m m size with backlight. This model has a small red LED status reminder.
Grandstream Networks, Inc. BT200 User Manual Page 11 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Real–time Clock: Synchronized to Internet time server Time zone configurable via web browser AM/PM .
Grandstream Networks, Inc. BT200 User Manual Page 12 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 G ETTING F AMILIAR WITH K EYPAD LCD U p /Down Ke y s Message Wait ing Indicator Called Menu Butto n M.
Grandstream Networks, Inc. BT200 User Manual Page 13 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Table 6: BT200 Keypad Buttons Key Button Key Button Definitions 0 - 9, *, # Digit, star and pound key.
Grandstream Networks, Inc. BT200 User Manual Page 14 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 M AKING P HONE C AL LS Handset, Speakerph one and Headset Mode The regular Handset mode can be switch.
Grandstream Networks, Inc. BT200 User Manual Page 15 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 #XX or #X are also valid so leading 0 is not requir ed (but OK). eg. 192.168.0.2 calling 192. 168.0.3 just dial #3 follow by SEND or # 192.168.0.2 calling 192.
Grandstream Networks, Inc. BT200 User Manual Page 16 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Answer an Incomin g Call There are two ways to answer an incoming call: 1.
Grandstream Networks, Inc. BT200 User Manual Page 17 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 transfer operation and hand up, if the call is not a nswered, pressing “FLASH” button to resume the original call.
Grandstream Networks, Inc. BT200 User Manual Page 18 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Key Call Fe atur es *30 Block Caller ID (for all subsequent calls) *31 Se nd Caller ID (for all subse.
Grandstream Networks, Inc. BT200 User Manual Page 19 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Configu ration G uide The BT200 can be configured in two ways. Firstly, using the Key Pad Configuration Menu on the phone; secondly, through embedded web-configuration menu.
Grandstream Networks, Inc. BT200 User Manual Page 20 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Press MENU to hear the selected ring tone, p ress ‘ ↓ ’ or ’ ↑ ’ to select the stored ring tones. 11 Display “ [11]trANSPOrt ” Press MENU to select SIP Transport.
Grandstream Networks, Inc. BT200 User Manual Page 21 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 This section will describe the options in the Web configuration user inte rface.
Grandstream Networks, Inc. BT200 User Manual Page 22 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Table 9: Device Configuration - Status MAC Address The device ID, in HEXADECIM AL format. IP Address This field shows IP addr ess of BT200 Product Model This field contains th e product model infor mation.
Grandstream Networks, Inc. BT200 User Manual Page 23 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Daylight Savings Time This parameter controls time displayed in dayli ght savings time. If set to “Y es”, then the displayed time will b e 1 hour ahead of nor mal time.
Grandstream Networks, Inc. BT200 User Manual Page 24 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 iLBC fra me size iLBC pack et frame size . Default is 20 ms. For Aste risk PBX, 30m s might be require d. iLBC payload type Payload type for iLBC. Default value is 97.
Grandstream Networks, Inc. BT200 User Manual Page 25 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Use Random Port This parameter, when set to “Yes”, will force random generation of both the local SIP and RTP ports. This is us ually necessary when multiple BT2 00s are behind the same NAT.
Grandstream Networks, Inc. BT200 User Manual Page 26 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Automatic Upgrade This function is used by ITSP. End user should NOT touch these parameters. Default is No. Choose “Yes” to enable automatic HTTP upgrade and provisioning.
Grandstream Networks, Inc. BT200 User Manual Page 27 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Call Progress Tones Using these settings, user s can configure ring or tone frequencies based on parameters from local telecom. By default, they ar e set to North American standard.
Grandstream Networks, Inc. BT200 User Manual Page 28 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 User ID is Phone Number If the phone has an assigned PSTN telep hone number, this field should b e set to “Yes”.
Grandstream Networks, Inc. BT200 User Manual Page 29 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Delayed Call Forward Wait Time Time waited before the call is for ward to a number or VM. Default is 20 seconds. Enable Call Fea tures Default is Yes. If set to “Yes”, all star co de call features will be supported locally.
Grandstream Networks, Inc. BT200 User Manual Page 30 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Auto Answer Default is No. If set to “Yes”, BT200 will automatically sw itch on speaker to answer the incoming call. Set to Interc om/Paging mode, it will answer the c all based on the SIP info header fr om the server.
Grandstream Networks, Inc. BT200 User Manual Page 31 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Software Upgrade & Customization Software (or firmware) upgrades are completed via either TFTP or HTTP. The corresponding configuration settings are in the ADVANCED SETTINGS configuration page .
Grandstream Networks, Inc. BT200 User Manual Page 32 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Instructions for local TFTP Upgrade: 1. Unzip the file and pu t all of them under the root director y of the TFTP server. 2. The PC running the TFTP server and the BT200 should be in the same LAN segment.
Grandstream Networks, Inc. BT200 User Manual Page 33 of 33 Firmware 1.1.5.15 Last Updated: 01/2008 Restore Factory Default S etting WARNING: Restoring the Factory Default Setting will dele te all configuration information of the phone . Please backup or print all the settings before you restoring fa ctory default settings.
An important point after buying a device Grandstream Networks BUDGETONE BudgeTone-200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Grandstream Networks BUDGETONE BudgeTone-200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Grandstream Networks BUDGETONE BudgeTone-200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Grandstream Networks BUDGETONE BudgeTone-200 you will learn all the available features of the product, as well as information on its operation. The information that you get Grandstream Networks BUDGETONE BudgeTone-200 will certainly help you make a decision on the purchase.
If you already are a holder of Grandstream Networks BUDGETONE BudgeTone-200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Grandstream Networks BUDGETONE BudgeTone-200.
However, one of the most important roles played by the user manual is to help in solving problems with Grandstream Networks BUDGETONE BudgeTone-200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Grandstream Networks BUDGETONE BudgeTone-200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
