Instruction/ maintenance manual of the product 4040 Graco Inc.
Go to page of 19
INSTRUCTIONS-PARTS LIST This manual conteins IMPORTANT WARNINGS and INSTRUCTIONS READ AND RETAIN FOR REFERENCE HYDRA-CLEAN @ 4040 Pressure Washer Model 800-345, Series A 230/460 Volt, 3 Phase 4ooo psi (276 bar) OPERATING PRESSURE 4300psi (296 bar) MAXIMUM WORKING PRESSURE GRACO INC.
~ BNG HIGH PRESSURE SPRAY CAM CAUSE SERIOUS INJURY. FOR PROFESSIONAL USE ONLY. OBSERWE ALL WARNINGS. Read and understand all instruction manuals before operating equipment. FLUID INJECTION HAZARD General Safety This pressure washer generates very high fluid pressure.
This product must be grounded. If it should malfunction or break down, grounding provides a path of least resistance for electric cunent to reduce the risk of electric shock. This equipment is equipped with a cord having an equipment-grounding conductor and a grounding plug.
HOSE SAFETY High pressure fluid in the hoses can be very dangerous. If the hose develops a leak, split or rupture due to any spray emitted from it can cause a fluid injection injury or kind of wear, damage or misuse, the high pressure other serious bodily injury or property damage.
INSTALLATION PUMP MOTOR DIPSTICK QUICK PUMP OIL LEVEL INDICATOR CONNECTION 314" GARDEN HOSE (9 Figure 1 Check for Shipping Damage Check the unit for any damage that may have occurred in shipping. Not@ the carrier Immediately if there is any damage.
STARTUP Always use this start up procedure to ensure that the unit is started safely and properly. 1. Check the oil level. Pump: Add SAE XI or 30 weight non-detergent oil as necessary. I 2. Tum on the water supply. CAUTION Never run the unit dry. Costly damage to the pump will result.
Installing and Changing Spray lips WARNING To reduce the risk of serious bodily injury, including fluid injection or splashing in the eyes or onto the skin, use extreme caution when changing spray tips. ALWAYS follow the procedure below. 1. Follow the Pressure Rellet Procedure.
SHUTDOWN, FLUSHING AND STORAGE WARNING Pressure Rellef Procedure To reduce the risk of serious bodily injury, eyes, or on the skin, always follow this including fluid injection and splashing in the procedure whenever you stop spraying for more than 10 minutes, when shutting down, and before checking or repairing any part of the system.
TROUBLESHOOTING CHART WARNING To reduce the risk of serious bodily injury, including fluid injection, splashing in the eyes or on the skin, or injury from moving parts, always fallow the Pressure Relief Procedure Warning before proceeding.
PARTS DRAWING 800-345 Hvdra-Clean@ 4040 Pressure Washer For wiring diagram, see page 14 ~~~~~ 10 308-522.
PARTS LIST 800-345 Hydra-Clean@ 4040 Pressure Washer REF NO. 1 2 3 4 5 6 7 8 10 9 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 27 28 30 29 31 32 33 34 PART 800-579 PUMP & MOTOR ASSEMBLY NO. DESCRIPTION QN (see page 15) 803-554 BRACKET, Pump Support 1 1 801-382 CORD, Power 10/4 803-263 BRACKET.
I 53 Model 4040 Wirlng Diagram 230 Volt. 3 Phase Model 4040 Wring Diagram 460 Volt, 3 Phase 12 308-522.
PARTS DRAWING 800-579 Pump and Motor Assembly PARTS LIST 800-579 Pump and Motor Assembly REF NO. 2 1 3 4 5 6 7 8 9 10 11 PART NO. 803-584 802-698 802-540 802-784 803-750 802-508 801 -559 802-783 802-794 100-527 803-552 DESCRIPTION MOTOR, 15.0 hp TEFC, 3 phase 1 COUPLER, 15 hp 1 WASHER, Lock 1/2 HOUSING 4 1 SCREW, Cap, socket hd.
PARTS DRAWING 803-508 Pump Assembly, 4000 psi 45 1 -/- / /- 14 308-522.
PARTS LIST 803-508 Pump Assembly, 4000 psi REF NO. 1 2 3 4 5 7 6 8 10 9 11 13 12 14 15 17 16 18 19 21 20 22 23 24 25 26 27 PART NO. DESCRIPTION . .....
PUMP SERVICE I WARN'NG 1 Servicing the Plungers To reduce the risk Of serious bodily injury, including fluid injection, splashing in the eyes or NOTE Plunger repair kit, P/N 803-510 is available .
Servicing the V-Packings 5. Thoroughly clean the packing cavities and examine NOTE There are two lypes of packing kits: one is for debris and damage. 1. 2. 3. 4. pacltlngs only, the other includes the packings, rings and retainers. Remove the manifold as outlined In the Pumping Section.
~ ACCESSORIES (Must be purchased separately) DOWNSTREAM CHEMICAL INJECTOR KIT WATER SANDBLASTING KIT 800-120 800-649 For abrasive cleaning of stubborn dirt and paint. from the pump. Stainless steel construction. For injecting harsh cleaning chemicals downstream kit.
THE GRACO WARRANTY WARRANTY AND DISCLAIMERS Gram warrants ail equipment manufachrred by fi and bearing its name to be frea from defects in material andwo~manshiponthedateofsaiebyanauthorizedGramdistnbutortotheonginalpurchaserforuse.
An important point after buying a device Graco Inc. 4040 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco Inc. 4040 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco Inc. 4040 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco Inc. 4040 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco Inc. 4040 will certainly help you make a decision on the purchase.
If you already are a holder of Graco Inc. 4040, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco Inc. 4040.
However, one of the most important roles played by the user manual is to help in solving problems with Graco Inc. 4040. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco Inc. 4040 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
