Instruction/ maintenance manual of the product LX800 AMD
Go to page of 46
LE-366 AMD Geode TM LX800 3.5” Embeded Boar d User ’ s Manual Edition 1.0 2008/02/20.
LE-366 User ’ s Manual -1- Copyright Copyright 2006. All rights r eserved. This document is copyrighted and all rig hts are reserved. The information in this document is subjec t to change without prior notice to make improvements to the products. This document contains propr ietary information and protected by copyright.
LE-366 User ’ s Manual -2- Packing List Please check the package before y ou st arting setup the system. Hardware: LE-366 series motherboard x 1 Cable Kit: Printed Matters: User ’ s Manual x 1 Dri.
LE-366 User ’ s Manual -3- Inde x Chapter 1 <Introduction> .................................................................... 6 1.1 <Product Overview> ............................................................................... 6 1.
LE-366 User ’ s Manual -4- A.7 <PS/2 Keyboard & Mouse Po rt> .......................................................... 35 Appendix B <Flash BIOS> ................................................................ 37 B.1 BIOS Auto Flash Tool .
LE-366 User ’ s Manual -5- (The Page is Left For Blank).
LE-366 User ’ s Manual - 6 - Chapter 1 <Introduction> 1.1 <Product Overview> LE-366 is the Mini-IT X motherboard with AMD Geode LX800 pl at form, with o nboard VGA, AC97 audio, GIGA LAN interface.
LE-366 User ’ s Manual - 7 - 1.2 <Product Specification> General Specification Form Factor 145 mm x 102 mm (5.7” x 4”) CPU Up to AMD Geode LX 800 Processor Memory One So-DIMM slot s upport DDR 266/333/400 MHz SDRAM up to 1GB Chipset AMD Geode CS5536 BIOS Phoenix-Award 4Mb PnP Flash Green Function ACPI 1.
LE-366 User ’ s Manual - 8 - Connector External Audio phone jack for Line-out and MIC-in. Onboard audio connector with pin header Expansiv e Interface PCI 1 Mini-PCI slot V2.
LE-366 User ’ s Manual - 9 - 1.3 <Mechanical Drawing> ‘ ‘ ‘ ‘ ‘ ‘.
LE-366 User ’ s Manual -10- 1.4 <Block Diagram> Flash BIOS (SST FW H) 16Mbx16 DDR DIMM MiniPCI SLOT IDE X 1 CFD X 1 4 x USB2.0 port s 83627HF PCI BUS/33Mhz AMD Geode LX Processo r AM D Ge od e.
LE-366 User ’ s Manual - 11 - Chapter 2 <Hardware Setup> 2.1<Connector Location> P1 CN1 J8 CN9 P2 CN4 JP2 JP3 CN7 USB2 USB1 LAN1 FDD1 MPCI1 CN8 CN3 J4 J P 1 C N 2 J 7 J 6 M I C 1 J S P K.
LE-366 User ’ s Manual -12- <Jumper Reference> Jumper Function JP1 L VDS Panel V oltage Selection (+5V / + 3.3V) JP2 COM2 RS232/422/485 Select JP3 COM2 RS232/422/485 Select J4 Clear CMOS Selec.
LE-366 User ’ s Manual - 13 - 2.1.1 <Connector Reference> Connector Function Remark CN1 VGA Display / Audio Connector S tandard CN2 Front Audio Connector L VDS Connector Slim CN3 Front Panel C.
LE-366 User ’ s Manual - 14 - 2.2 <CPU and Memory Setup> 2.2.1 <CPU Setup> The board integrates AMD Geode LX800 500MHz processor w ith special d esign for power appliance. It requires onl y 3.8W power consumption at most, and is totally designed for fan-less system.
LE-366 User ’ s Manual - 15 - 2.5 <CMOS Setup> The board’s data of CMOS can be setting in BIOS. If the board refus es to boot due to inappropriate CMOS setting s, here is how to proceed to clear (r eset) the CMOS to its default values.
LE-366 User ’ s Manual -16- 2.3 <Enhanced IDE & CF Interface> The board has one Ultra DMA33 IDE interf ace to support up to 2 A T API devices, and o ne Compact Flash Ty pe II socket on the solder side.
LE-366 User ’ s Manual - 17 - 2.4 <Floppy Port> The board provides a slim type floppy port; pleas e use the 26-pin FPC cable in the package to connect the floppy device. FDD 4. Lif t up this plastic bar 5. Slot the cable in (Blue p aste for outside) 6.
LE-366 User ’ s Manual -18- 2.8 <Onboard Display Interface> The board integrates AMD Geode LX800 processor wi th built-in 2D video e ngine, to provide onboard DB15 VGA connector , 18-bit L VDS interf ace.
LE-366 User ’ s Manual - 19 - 2.4.2 <Digit al Display > The board provides one 30-pin LVDS connector for 18-bit single c hannel panel, supports up to 1024 x 768 of resolution, with one LCD bac.
LE-366 User ’ s Manual -20- Connector: CN_LVDS (CN2) (for 18 bit Single channel LVDS pane l) Type: 30-pin header (15 x 2 pitch 2.0 mm) Connector model: Hirose DF13-40DP-1.
LE-366 User ’ s Manual - 21 - To setup the LCD, y ou need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight power.
LE-366 User ’ s Manual -22- After setup the devices w ell, you need to select the LCD panel type in the BIOS. The panel type mapping is list below : Panel Number Resolution 1 640 x 480 2 800 x 600 3.
LE-366 User ’ s Manual - 23 - <USB2.0 Interface> Based on AMD CS5536, the board provi des 2 x USB2.0 ports. The USB2.0 interface provides up to 480Mbps of transferring rate.
LE-366 User ’ s Manual -24- 2.5 <GPIO Interface> The board provides a programmable 8-bit digita l I/O interface; you can use this general purpose I/O port for system control like POS or KIOSK. Connector: CN8 Type: onboard 2 x 6-pin header, pitch=2.
LE-366 User ’ s Manual - 25 - 2.6 <Serial Port Jumper Setting > The COM1 RS232 serial port, with jumper selectable RS232/422/485 for CN_COM2 Connector: COM1 Type: 9-pin Dip male connector on I.
LE-366 User ’ s Manual - 26 - 2.7 <Power and Fan Connector> The LE-366 provides a standard A T X power supply with 20-pin A T X connector , and the board provides one 4-p in P4 additional use power connect or for internal power supply and one 3-pin cooler fan connector for system.
LE-366 User ’ s Manual - 27 - 2.7.3 <Fan Connector> Connector: SYSFAN Type: 3-pin fan wafer connector Connector: DC_IN Type: 2-pin DC power connector Pin Descrip tion Pin Description 1 +12V 2 .
LE-366 User ’ s Manual - 28 - 2.8 <Indicator and Switch> The JFRNT provides front con trol panel of the boa rd, such as power button, rese t and beeper , etc. Please check well before y ou connecting the cables on the chassis. Connector: CN3 Type: onboard 14-pin (2 x 7) 2.
LE-366 User ’ s Manual - 29 - (This Page is Left For Blank).
LE-366 User ’ s Manual - 30 - Chapter 3 <BIOS Setup> The motherboard uses the Award BIOS for the s y stem configur ation. The Award BIOS in the single board comp uter is a customized ve rsion of the in dustrial standard BIOS for IBM PC AT-compatible computers.
LE-366 User ’ s Manual - 31 - (This Page is Left for Blank).
LE-366 User ’ s Manual -32- Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: J6 Type: 44-pin (22 x 2) box header Pin Assignment Pin A ssignment 1 IDERST# 2 GND 3 PID7 4 PID.
LE-366 User ’ s Manual - 33 - A.2 <Floppy Port> Connector: FDD1 Type: 26-pin connector Pin Assignment Pin Assignment 1 VCC 2 INDEX# 3 VCC 4 DRV_SEL# 5 VCC 6 DSK_CH# 7 N/C 8 N/C 9 N/C 10 MOTOR# 11 N/C 12 DIR# 13 DENSEL# 14 STEP# 15 GND 16 WDATA# 17 GND 18 WGATE# 19 GND 20 TRACK# 21 GND 22 WOROT# 23 GND 24 RDATA# 25 GND 26 SIDE# A.
LE-366 User ’ s Manual -34- A.4 <CRT Port> Connector: CRT Type: 15-pin D-sub female connector on I/O Panel Pin Descriptio n Pin Description Pin Description 1 RED 6 Ground 11 N/C 2 GREEN 7 Ground 12 CRT_DDCDATA 3 BLUE 8 Ground 13 HSYNC 4 N/C 9 VGA_VCC 14 VSYNC 5 Ground 10 Ground 15 CRT_DDCCLK A.
LE-366 User ’ s Manual - 35 - A.7 <PS/2 Keyboard & Mouse Port> Connector: Mouse / Keyboard Type: 6-pin Mini-DIN connector on bracket Pin A ssignment Pin Assignment 1 KB_DATA 2 MS_DATA 3 GN.
LE-366 User ’ s Manual - 36 - (This Page is Left for Blank).
LE-366User ’ s Manual - 37 - Appendix B <Flash BIOS> B.1 BIOS Auto Flash T ool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below : TU ht tp :// www.a ward .
LE-366 User ’ s Manual -38- Appendix C <System Resources> C1. <I/O Port Address Map>.
LE-366 User ’ s Manual - 39 -.
LE-366 User ’ s Manual -40- C2. <Memory Address Map>.
LE-366 User ’ s Manual - 41 - C3. <System IRQ Resources>.
LE-366 User ’ s Manual -42- Appendix D <Programming GPIO’s> The GPIO can be programmed with the MSDOS debug program using simple IN/OUT com mands.
LE-366 User ’ s Manual - 43 - Appendix E <W atch Dog timer Setting > The watchdog timer makes the system auto-reset w h ile it stop s to work for a period.
LE-366 User ’ s Manual -44- (This Page is Left for Blank).
LE-366 User ’ s Manual - 45 - Contact Information Any advice or comment about our product s and service, or anythi ng we can help you please don’t hesitate to cont act with us. We will do our best to support you for your products, project s and business.
An important point after buying a device AMD LX800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMD LX800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMD LX800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMD LX800 you will learn all the available features of the product, as well as information on its operation. The information that you get AMD LX800 will certainly help you make a decision on the purchase.
If you already are a holder of AMD LX800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMD LX800.
However, one of the most important roles played by the user manual is to help in solving problems with AMD LX800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMD LX800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
