Instruction/ maintenance manual of the product LV-651 AMD
Go to page of 50
L V -651 Mini-ITX Motherboar d User ’ s Manual Edition 1.0 2006/7/21.
L V -651User’s Manual Copyright Copyright 2006. All rights r e served. This document is copyrighted a nd all rights are reserved. The information in this document is subjec t to change without prior notice to make improvements to the products. This document contains propr ietary information and protected by copyright.
L V -651User’s Manual Packing List Please check the package before y ou st arting setup the system Hardware: L V -651 series motherboard x 1 Cable Kit: COM port Cable x1 Printed Matters: User ’ s .
L V -651User ’ s Manual Inde x Chapter 1 <Introduction>………………………………………………………………7 1.1 <Product Overview> …………………………………………………………..7 1.2 <Product Specification> .
L V -651User ’ s Manual 2.14.2 <Power Output>…………………………………….….32 2.14.3 <Fan Connector>………………………………………………….33 2.15 <Indicator and Sw itch>………………………………………………….
L V -651User ’ s Manual (The Page is Lef t For Blank).
L V -651 User ’ s Manual Introduction Product Ov erview 7 Chapter 1 <Introduction> 1.1 <Product Overview> L V -651 is the Mini-IT X motherbo ard wi th A M D Geode LX800 platform, with onboard VGA, AC97 audio, Giga LAN interface.
L V -651 User ’ s Manual Introduction Product Specification 8 1.2 <Product Specification> General Specification Form Factor Mini -ITX motherboard CPU Embedded AMD Geode LX800 500MHz Fanless w .
L V -651 User ’ s Manual Introduction Product Specification 9 Full duplex, IEEE802.3U compliant Connector One External RJ45 connector wi th LED on rear I/O panel A ud io Interface Chipset Realtek ® ALC203 AC97 Audio compliance Interface 2 channels sound output Connector External Audio phone jack for Line-out, Line-in, MIC-in.
L V -651 User ’ s Manual Introduction M e c h a n i c a l D r a w i n g 10 1.3 <Mechanical Drawing>.
L V -651 User ’ s Manual Introduction Block Diagram 11 1.4 <Block Diagram> AC97 A udio BIOS Floppy GPIO IrDA Mini PCI slot 1 x 184-pin DDR DIMM U p to 1GB IEEE1394 TFT/L VDS LCD CompactFlash ＆ IDE 4 x USB2.
L V -651 User ’ s Man ual Hardware Setup Connector Location 12 Chapter 2 <Hardware Setup> 2.1 <Connector Location> DC_OUT CDIN PS2 SYSF AN CN_INV CN_L VDS AT X MINIPCI CN_COM1/2 CN_LCD D.
L V -651 User ’ s Man ual Hardware Setup Jumper Reference 13 2.2 <Jumper Reference> Jumper Function JRTC CMOS Operating/Clear Setting JV1/2 Setting COM Port V oltage JVLCD LCD Panel Voltage Se.
L V -651 User ’ s Man ual Hardware Setup Connector Reference 14 2.3 <Connector Reference> 2.3.1 <Internal Connector> Connector Function Remark DIMM 184 -pin DDR SDRAM DIMM slot S tandard.
L V -651 User ’ s Man ual Hardware Setup CPU and Memory Setup 15 2.4 <CPU and Memory Setup> 2.4.1 <CPU Setup> The board integrates AMD Geode LX800 500MHz processor w ith special d esign for power appliance. It requires onl y 3.8W power consumption at most, and is totally designed for fanless system.
L V -651 User ’ s Man ual Hardware Setup CMOS Setup 16 2.5 <CMOS Setup> The board’s data of CMOS can be setting in BIOS. If the board refus es to boot due to inappropriate CMOS setting s, here is how to proceed to clear (r eset) the CMOS to its default values.
L V -651 User ’ s Man ual Hardware Setup Enhan ced IDE & CF Interface 17 2.6 <Enhanced IDE & CF Interface> The board has one Ultra DMA33 IDE interf ace to support up to 2 A T API devices, and one Compact Flash Ty pe II socket on the solder side.
L V -651 User ’ s Man ual Hardware Setup Floppy Port 18 2.7 <Floppy Port> The board provides a slim type floppy port; pleas e use the 26-pin FPC cable in the package to connect the floppy device. FDD 4. Lif t up this plastic bar 5. Slot the cable in (Blue p aste for outside) 6.
L V -651 User ’ s Man ual Hardware Setup LAN Interface 19 2.8 <LAN Interface> The board int egrates with one Realtek RT L81 10S-32 Giga bit Ethernet controller . T he Realtek RTL81 10S-32 supports triple speed of 10/10 0/1000Base-T , with IEEE802.
L V -651 User ’ s Man ual Hardware Setup Digita l Display 20 2.9.2 <Digit al Display > The board provides one 40-pin LVDS connector for 18-bit single c hannel panel, supports up to 1024 x 768 .
L V -651 User ’ s Man ual Hardware Setup Digita l Display 21 Connector: CN_LVDS ( for 24bit Single channel LVDS panel ) Type: 40-pin header (40 x 2 pitch 2.
L V -651 User ’ s Man ual Hardware Setup Digita l Display 22 Connector: CN_LVDS ( for 18bit Single channel LVDS panel ) Type: 40-pin header (40 x 2 pitch 2.
L V -651 User ’ s Man ual Hardware Setup Digita l Display 23 Connector: CN_LCD Type: onboard 2 x 20-pin header wi th housing, pitch=2.0mm Pin Signal Pin Signal 1 ENAVDD 2 ENAVEE 3 GND 4 GND 5 VLCD 6.
L V -651 User ’ s Man ual Hardware Setup Digita l Display 24 To setup the LCD, y ou need the component below: 1. A panel with LVDS interfaces. 2. An inverter for panel’s backlight power.
L V -651 User ’ s Man ual Hardware Setup Digita l Display 25 After setup the devices w ell, you need to select the LCD panel type in the BIOS. The panel type mapping is list below : Panel Number Res.
L V -651 User ’ s Man ual Hardware Setup Onboard A udio Interface 26 2.10 <Onboard Audio Interface> The board provides the onboard AC97 2 channel audio interface with Realtek ALC203.
L V -651 User ’ s Man ual Hardware Setup USB2.0 Interface 27 2.11 <USB2.0 Interface> Based on AMD CS5536, the board provi des 2 x USB2.0 ports.
L V -651 User ’ s Man ual Hardware Setup USB2.0 Interface 28 Connector: CN_USB Type: 10-pin (5 x 2) header for USB1/2 Ports Pin Description Pin Description 1 VCC 2 VCC 3 Data0- 4 Data1- 5 Data0+ 6 Data1+ 7 Ground 8 Ground 9 Ground 10 N/C P.S : The USB2.
L V -651 User ’ s Man ual Hardware Setup GPIO Interface 29 2.12 <GPIO Interface> The board provides a programmable 8-bit digita l I/O interface; you can use this general purpose I/O port for system control like POS or KIOSK. Connector: CN_DIO Type: onboard 2 x 6-pin header, pitch=2.
L V -651 User ’ s Man ual Hardware Setup Serial Port Jumper Setting 30 2.13 <Serial Port Jumper Setting > The onboard CN_COM1 RS232 serial port, with jumper selectable RS232/422/485 for CN_COM.
L V -651 User ’ s Man ual Hardware Setup Serial Port Jumper Setting 31 JCSEL1 JCSEL2 RS-232 RS-485 RS-422 1 2 5 6 1 3 10 12.
L V -651 User ’ s Man ual Hardware Setup Power and Fan Connector 32 2.14 <Power and Fan Connector> The L V -651 provid es a st andard A T X power supply with 20-pin A TX connector , and the board provides one 4-p in P4 additional use power connect or for internal power supply and one 3-pin cooler fan connector for system .
L V -651 User ’ s Man ual Hardware Setup Power and Fan Connector 33 2.14.3 <Fan Connector> Connector: SYSFAN Type: 3-pin fan wafer connector Connector: DC_IN Type: 4-pin DC power connector Pin.
L V -651 User ’ s Man ual Hardware Setup Indicator and Switch 34 2.15 <Indicator and Switch> The JFRNT p rovides front control p anel of the board, such as power button, reset and beeper , etc. Please check well before y ou connecting the cables on the chassis.
L V -651 User ’ s Man ual 35 (This Page is Left For Blank.
L V -651 User ’ s Manu al BIOS Setu p BIOS Setup 36 Chapter 3 <BIOS Setup> The motherboard uses the Award BIOS for the s y stem configur ation. The Award BIOS in the single board comp uter is a customized ve rsion of the in dustrial standard BIOS for IBM PC AT-compatible computers.
L V -651 User ’ s Man ual 37 (This Page is Left for Blank).
L V -651 User ’ s Manual I/O Port Pin Assignment IDE Port 38 Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: IDE1 Type: 44-pin (22 x 2) box header Pin Description Pin Desc.
L V -651 User ’ s Manual I/O Port Pin Assignment Floppy Port 39 A.2 <Floppy Port> Connector: FDD Type: 26-pin connector Pin Description Pin Description 1 VCC 2 INDEX 3 VCC 4 DRV0 5 VCC 6 DSKCH.
L V -651 User ’ s Manual I/O Port Pin Assignment CRT Port 40 A.4 <CRT Port> Connector: CRT Type: 15-pin D-sub female connector on I/O Panel Pin Description Pin Description Pin Description 1 RED 6 Ground 11 N/C 2 GREEN 7 Ground 12 5VCDA 3 BLUE 8 Ground 13 HSYNC 4 N/C 9 LVGA5V 14 VSYNC 5 Ground 10 Ground 15 5VCLK A.
L V -651 User ’ s Manual I/O Port Pin Assignment PS/2 Keyboard & Mouse Port 41 A.7 <PS/2 Keyboard & Mouse Port> Connector: Keyboard Type: 6-pin Mini-DIN connector on bracket Pin 1 2 3 .
L V -651 User ’ s Man ual 42 (This Page is Left for Blank).
L V -651 User ’ s Manu al Flash BIOS BIOS A uto Flash T ool 43 Appendix B <Flash BIOS> B.1 BIOS Auto Flash T ool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below : TU ht tp :// www.
L V -651 User ’ s Man ual Sy stem Resources I/O Port A ddress Map 44 Appendix C <System Resources> C1.<I/O Port Address Map>.
L V -651 User ’ s Man ual Sy stem Resources I/O Port A ddress Map 45.
L V -651 User ’ s Man ual Sy stem Resources Memory A dd ress Map 46 C2.<Memory Address Map>.
L V -651 User ’ s Man ual Sy stem Resources System IRQ Resources 47 C3.<System IRQ Resources>.
L V -651 User ’ s Man ual W atch Dog timer Settin g W atch Dog timer Setting 48 Appendix D <Watch Dog timer Setting > The watchdog timer makes the system auto-reset w hile it s top s to w ork for a period. T he integrated watchdog timer can be setup as sy stem reset mode by program.
L V -651 User ’ s Man ual 49 (This Page is Lef t for Blank).
L V -651 User ’ s Manu al Cont act Information Conta ct Information 50 Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to cont act with us. We will do our best to support you for your products, project s and business.
An important point after buying a device AMD LV-651 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMD LV-651 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMD LV-651 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMD LV-651 you will learn all the available features of the product, as well as information on its operation. The information that you get AMD LV-651 will certainly help you make a decision on the purchase.
If you already are a holder of AMD LV-651, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMD LV-651.
However, one of the most important roles played by the user manual is to help in solving problems with AMD LV-651. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMD LV-651 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
