Instruction/ maintenance manual of the product 4035BD Graco
Go to page of 30
Instructions G-For ce Belt-Driven Pr essur e W asher 3A0519F EN -For high pressure water c leaning- -For outdoor use only- IMPORT ANT SAFETY INSTRUCTIONS Read all warnings and instructions in this manual. SA VE THESE INSTRUCTIONS. PROVEN QUALITY . LEADING TECHNOLOGY .
2 CONTENTS Important User Information .......................................... 3 Spray Precautions ......................................................... 3 Fire & V entilation Precautions ...................................... 4 Carbon Monoxide Hazard .
3 The following warnings are for the setup, use, grounding, maintenance, and r epair of this equipment. The exclamation point symbol alerts you to a general warning and the hazard symbols refer to pr ocedure-spe- cic risks. When these symbols appear in the body of this manual, refer back to these W arnings.
4 • Do not direct spray on or into electrical installations of any kind! This includes electrical outlets, light bulbs, fuse boxes, transformers, etc. Severe electrical shock may occur . • Even after you shut off the unit, ther e is high pressur e water left in the pump, hose and gun until you release it by triggering the gun.
5 MISCELLANEOUS SAFETY PRECAUTIONS Never allow children or adolescents to operate this unit. Read and follow all handling, operations, maintenance and safety instructions listed in this manual and the engine operator’ s manual that accompanies this unit, and provide such information to anyone who will be operating this unit.
6 Component Identication Item Description 1 Decal - W arning: Risk Of Bur ns 2 Engine 3 Decal - Caution: Risk Of Fire 4 Oil Sight Glass 5 Decal - W arning/caution 6 Beltguard 7 Decal - Operations 8.
7 INST ALLA TION & PREP ARA TION INSTRUCTIONS Attire Proper attir e is essential to your safety . It is advised to utilize whatever means necessary to protect eyes, ears, and skin. Additional safety attire (such as r espiratory mask) may be requir ed when using detergent cleaning agents with this washer .
8 INST ALLA TION & PREP ARA TION INSTRUCTIONS Engine fuel tank Review “Fire & V entilation Precautions” pg. 4, before fueling. Locate the Safety Decals on your unit and heed their warnings. A minimum of 86 octane fuel is recommended for use with this unit.
9 INST ALLA TION & PREP ARA TION INSTRUCTIONS Nozzle connection Be certain the trigger gun is locked in the “OFF” posi- tion. The nozzle assembly should be disconnected from the gun/wand assembly at this time by retracting the locking ring on the quick-connect tting to remove the nozzle.
10 INST ALLA TION & PREP ARA TION INSTRUCTIONS Unloader Adjustable The unloader valve on your machine is equipped with an adjustment knob to adjust the pressur e. Should less pressur e be requir ed, simply tur n the adjustment knob counterclockwise.
11 OPERA TING INSTRUCTIONS Priming the pump It is essential to prime the pump on initial start-up and each time the water supply is disconnected from the unit after initial use. 1. Lay the high pr essure hose out to r emove any loops. W ater ow will constrict the hose, creating tight loops if the hose is not straight.
12 OPERA TING INSTRUCTIONS Start-up Refer to the “Safety Precautions” pgs. 3-5 befor e start- ing the unit. Locate the Safety Decals on your unit and heed their warnings. Never look directly into the nozzle. High pr essure water creates a risk of sever e injury .
13 OPERA TING INSTRUCTIONS Cleaning with detergents Refer to “Deter gent Cleaning Precautions” pg. 4 before working with deter gents. Be certain to wear protective safety attire. Prepar e detergent solution accor ding to label directions. Never pump acids, alkaline, abrasive uids or solvents through the unit.
14 STORAGE & MAINTENANCE INSTRUCTIONS Engine The engine instructions that accompany your unit detail specic procedur es for maintenance of the engine. Fol - lowing the engine manufacturer’ s recommendations will extend engine work life. Pump The pump oil must be changed after the rst 25 hours of operation on all units.
15 STORAGE & MAINTENANCE INSTRUCTIONS Winterizing For storage and transportation purposes in subfreezing ambient temperatures, it will be necessary to winter - ize this unit.
T roubleshooting Engine will not start. V arious engine pr oblems. Refer to the engine manual accom- panying your unit. Unit components are fr ozen. Allow to thaw .
17 PUMP SERVICE: 4043 MODEL PRESSURE W ASHERS Repair kits are available. See the Parts List, page 22. For the best results, use all parts in kits. Follow Shutdown Procedur e, page 13 to relieve system pressur e. V alves For a set of six valves, order V alve Assembly Kit 801472.
18 PUMP SERVICE: 4035 MODEL PRESSURE W ASHERS Repair kits are available. See the Parts List, page 26. For the best results, use all parts in kits. Follow Shutdown Procedur e, page 13 to relieve system pressur e. V alves For a set of six valves, order V alve Assembly Kit 801472.
19 Notes.
20 Pr essure W asher - Parts 262297- Model 4043BD 3 2 3 4 6 17 16 23 16 20 3 78 2 75 74 43 44 45 46 55 67 61 26 29 80 76 18 19 42 5 56 57 81 45 44 82 83 1 77 61 66 65 65 66 72 71 70 66 61 69 61 60 59 .
21 Pr essure W asher - Parts 262297- Model 4043BD DESCRIPTION P ART# QTY 1 HANDLE 16E514 1 2 WASHER 107194 30 3 LOCKNUT 111040 21 4 BOL T 114251 7 5 WHEEL 16E474 2 6 LOCKNUT 119554 2 7 BA TTER Y BOX 1.
22 Pump Assembly - Parts 803508 (for use with Model 4043BD).
23 Pump Assembly - Parts 803508 (for use with Model 4043BD) DESCRIPTION P ART# QTY KIT , REP AIR, V AL VES 801472 6 INCLUDES 1 KIT , REP AIR, OIL SEAL 801473 3 INCLUDES 9 KIT , PLUNGER 803502 3 INCLUD.
24 Pr essure W asher - Parts 262296- Model 4035BD.
25 Pr essure W asher - Parts 262296- Model 4035BD DESCRIPTION P ART # QTY 1 HANDLE 16E514 1 2 WASHER 107194 14 3 LOCKNUT 111040 13 4 BOL T 114251 7 5 WHEEL 16E474 2 6 LOCKNUT 119554 2 7 BOL T 100521 6.
26 Pump Assembly - Parts 24E790 (for use with Model 4035BD).
27 Pump Assembly - Parts 24E790 (for use with Model 4035BD) DESCRIPTION P ART# QTY KIT , REP AIR ,V AL VES 801472 6 INCLUDES 2-6 (1) KIT , REP AIR, OIL SEAL 801473 3 INCLUDES 7 KIT , REP AIR, PLUNGER .
28 Notes.
29 T echnical Data Model 4043 Model 4035 W orking Pr essure Range 3900-4000 psi 3250-3950 psi Operating Pressur e 4000 psi 3500 PSI Maximum W orking Pr essure 4000 psi 4000 psi Engine Size 480 cc 390 cc Maximum Delivery 4.3 gpm (16.3 l/mn) 3.4 gpm (12.
30 Graco Standar d W arranty Graco warrants all equipment refer enced in this document which is manufactured by Graco and bearing its name to be free fr om defects in material and workmanship on the date of sale to the original purchaser for use.
An important point after buying a device Graco 4035BD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco 4035BD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco 4035BD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco 4035BD you will learn all the available features of the product, as well as information on its operation. The information that you get Graco 4035BD will certainly help you make a decision on the purchase.
If you already are a holder of Graco 4035BD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco 4035BD.
However, one of the most important roles played by the user manual is to help in solving problems with Graco 4035BD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco 4035BD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
