Instruction/ maintenance manual of the product Geode LX800 AMD
Go to page of 46
LE-366 AMD Geode TM LX800 3.5” Embeded Boar d User ’ s Manual Edition 1.0 2008/02/20.
LE-366 User ’ s Manual -1- Copyright Copyright 2006. All rights reserved. T his document is copyrighted a nd all rights are res erved. The information in this document is subj ec t to change without prior notice to make improvements to the products.
LE-366 User ’s Manual -2- Packing List Please check the package before y ou st arting setup the system. Hardware: LE-366 series motherboard x 1 Cable Kit: Printed Matters: User ’s Manual x 1 Driv .
LE-366 User ’s Manual -3- Inde x Chapter 1 <Introduction> .................................................................... 6 1.1 <Product Overview > ............................................................................... 6 1.
LE-366 User ’s Manual -4- A.7 <PS/2 Keyboard & Mouse Po rt> .......................................................... 35 Appendix B <Flash BIOS> ................................................................ 37 B.1 BIOS Auto Flash Tool .
LE-366 User ’s Manual -5- (The Page is Left For Blank).
LE-366 User ’s Manual - 6 - Chapter 1 <Introduction> 1.1 <Product Overview> LE-366 is the Mini-ITX motherboard w it h AMD Geode LX800 platform, with onboard V GA, AC97 audio, GIGA LAN interface.
LE-366 User ’s Manual - 7 - 1.2 <Product Specification> General S pecification Form Factor 145 mm x 102 mm (5.7” x 4”) CPU Up to AMD Geode LX 800 Processor Memory One So-DIMM slot s upport DDR 266/333/400 MHz SDRAM up to 1GB Chipset AMD Geode CS5536 BIOS Phoenix-Aw ard 4Mb PnP Flash Green Function ACPI 1.
LE-366 User ’s Manual - 8 - Connector External Audio phone jack for Line-out and MIC-in. Onboard audio connector wi th pin header Exp ansiv e Interface PCI 1 Mini-PCI slot V2.
LE-366 User ’s Manual - 9 - 1.3 <Mechanical Drawing> ‘ ‘ ‘ ‘ ‘ ‘.
LE-366 User ’s Manual -10- 1.4 <Block Diagram> Flash BIOS (SST FW H) 16Mbx16 DDR DIMM MiniPCI SLOT IDE X 1 CFD X 1 4 x USB2.0 port s 83627HF PCI BUS/33Mhz A MD Geode LX Processo r AM D G e o d.
LE-366 User ’s Manual - 11 - Chapter 2 <Hardware Setup> 2.1<Connector Location> P1 CN1 J8 CN9 P2 CN4 JP2 JP3 CN7 USB2 USB1 LA N1 FDD1 MPCI1 CN8 CN3 J4 J P 1 C N 2 J 7 J 6 M I C 1 J S P K.
LE-366 User ’s Man ual -12- <Jumper Reference> Jumper Function JP1 L VDS Panel V oltage Selection (+5V / + 3.3V) JP2 COM2 RS232/422/485 Select JP3 COM2 RS232/422/485 Select J4 Clear CMOS Selec.
LE-366 User ’s Man ual - 13 - 2.1.1 <Connector Reference> Connector Function Remark CN1 VGA Display / Audio Connector S tandard CN2 Front Audio Connector L VDS Connector Slim CN3 Front Panel C.
LE-366 User ’s Man ual - 14 - 2.2 <CPU and Memory Setup> 2.2.1 <CPU Setup> The board inte grates AMD Geode LX800 500MHz pr ocessor with special design for power appliance. It requires only 3.8W po wer consumption at most, and is totally designed for fan-less system.
LE-366 User ’s Man ual - 15 - 2.5 <CMOS Setup> The board’s d ata of CMOS can be setting in BIOS. If the board refuses to boot due to inappropriate CMOS settings, here is ho w to proc eed to clear (reset) t he CMOS to its default values.
LE-366 User ’s Man ual -16- 2.3 <Enhanced IDE & CF Interface> The board has one Ultra DM A33 IDE interface to supp ort up to 2 A T API devices, and one Compact Flash T ype II socket on the solder side.
LE-366 User ’s Man ual - 17 - 2.4 <Floppy Port> The board provides a slim t ype floppy port; pleas e use the 26-pin F PC cable in the package to connect the floppy device. FDD 4. Lif t up this plastic bar 5. Slot the cable in (Blue p aste for out side) 6.
LE-366 User ’s Man ual -18- 2.8 <Onboard Display Interface> The board integrates AMD Geode LX800 processor wi th built-in 2D v ideo engi ne, to provide onboard DB15 VGA connector , 18-bit L VDS interf ace.
LE-366 User ’s Man ual - 19 - 2.4.2 <Digit al Display > The board prov ides one 30-pi n LVDS conn ector for 18-bit single c hannel panel, su pports up to 1024 x 768 of resolution, wi th one LC.
LE-366 User ’s Man ual -20- Connector: CN_LVDS (CN2) (for 18 bit Single channe l LVDS panel) Type: 30-pin header (15 x 2 pitch 2.0 mm) Connector model: Hirose DF13-40DP-1.
LE-366 User ’s Man ual - 21 - To setup the LCD, y ou need the component below : 1. A panel w ith LVDS interfaces. 2. An inverter for panel’s backlight pow er.
LE-366 User ’s Man ual -22- After setup the devices w ell, you need to select the LCD panel ty pe in the BIOS. The panel type mapping is list below : Panel Number Resolution 1 640 x 480 2 800 x 600 .
LE-366 User ’s Man ual - 23 - <USB2.0 Interface> Based on AMD CS5536, the board prov ides 2 x USB2.0 ports. T he USB2.0 interface provides up to 480Mbps of transferring rate.
LE-366 User ’s Man ual -24- 2.5 <GPIO Interface> The board provides a programmable 8-bit digita l I/O interface; you can use this general purpose I/O port for system control like POS or KIOSK. Connector: CN8 Type: onboard 2 x 6-pin header, pitch=2.
LE-366 User ’s Man ual - 25 - 2.6 <Serial Port Jumper Setting > The COM1 RS232 serial port, with jumper selectable RS232/422/485 for CN_COM2 Connector: COM1 Type: 9-pin Dip male connector on I.
LE-366 User ’s Man ual - 26 - 2.7 <Power and Fan Connector> The LE-366 provid es a standard A TX po wer supply with 20-p in A TX connector , an d the board provides one 4-pin P4 additional use po w er connector for internal po w er supply and one 3-pin cooler fan connector for system.
LE-366 User ’s Man ual - 27 - 2.7.3 <Fan Connector> Connector: SYSFA N Type: 3-pin fan w afer connector Connector: DC_IN Type: 2-pin DC pow er connector Pin Description Pin Description 1 +12V .
LE-366 User ’s Man ual - 28 - 2.8 <Indicator and Switch> The JFRNT provides front co ntrol p anel of the boar d, such as pow er button, re set and beeper , etc. Please check we ll before you connecting the cables on the chassis. Connector: CN3 Type: onboard 14-pin (2 x 7) 2.
LE-366 User ’s Man ual - 29 - (This Page is Left For Blank).
LE-366 User ’s Man ual - 30 - Chapter 3 <BIOS Setup> The motherboard uses the Award BIOS for the system configuration. The A ward BIOS in the single boar d computer is a customiz ed ve rsio n of the industrial stand ard BIOS for IBM PC AT-compatible computers.
LE-366 User ’s Man ual - 31 - (This Page is Left for Blank).
LE-366 User ’s Man ual -32- Appendix A <I/O Port Pin Assignment> A.1 <IDE Port> Connector: J6 Type: 44-pin (22 x 2) box header Pin A ssignment Pin A ssignment 1 IDERST# 2 GND 3 PID7 4 PI.
LE-366 User ’s Man ual - 33 - A.2 <Floppy Port> Connector: FDD1 Type: 26-pin connector Pin A ssignment Pin Assignment 1 VCC 2 INDEX# 3 VCC 4 DRV_SEL# 5 VCC 6 DSK_CH# 7 N/C 8 N/C 9 N/C 10 MOTOR# 11 N/C 12 DIR# 13 DENSEL# 14 STEP# 15 GND 16 WDAT A# 17 GND 18 WG ATE# 19 GND 20 T RACK# 21 GND 22 WO ROT# 23 GND 24 RDAT A# 25 GND 26 SIDE# A.
LE-366 User ’s Man ual -34- A.4 <CRT Port> Connector: CRT Type: 15-pin D-sub female connector on I/O Panel Pin Description Pin Description Pin Description 1 RED 6 Ground 11 N/C 2 GREEN 7 Ground 12 CRT_DDCDATA 3 BLUE 8 Ground 13 HSYNC 4 N/C 9 VGA_VCC 14 VSYNC 5 Ground 10 Ground 15 CRT_DDCCLK A.
LE-366 User ’s Man ual - 35 - A.7 <PS/2 Keyboard & Mouse Port> Connector: Mouse / Keyboa rd Type: 6-pin Mini-DIN connector on bracket Pin A ssignment Pin Assignment 1 KB_DATA 2 MS_DATA 3 G.
LE-366 User ’s Man ual - 36 - (This Page is Left for Blank).
LE-366User ’ s Man ual - 37 - Appendix B <Flash BIOS> B.1 BIOS Auto Flash T ool The board is based on Award BIOS and can be updated easily by the BIOS auto flash tool. You can download the tool online at the address below : TU ht tp : / / www.
LE-366 User ’s Man ual -38- Appendix C <System Resources> C1. <I/O Port Address Map>.
LE-366 User ’s Man ual - 39 -.
LE-366 User ’s Man ual -40- C2. <Memory Address Map>.
LE-366 User ’s Man ual - 41 - C3. <System IRQ Resources>.
LE-366 User ’s Man ual -42- Appendix D <Programming GPIO’s> The GPIO can be programme d with the MSDOS debug program using sim ple IN/OUT com ma nds.
LE-366 User ’s Man ual - 43 - Appendix E <W atch Dog timer Setting > The watchdog timer makes the s ystem auto-reset while it stops to work for a period.
LE-366 User ’s Man ual -44- (This Page is Left for Blank).
LE-366 User ’s Man ual - 45 - Contact Information Any advice or comment about our products and service, or anything we can help you please don’t hesitate to cont act with us. We will do our best to support you for your products, project s and business.
An important point after buying a device AMD Geode LX800 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought AMD Geode LX800 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data AMD Geode LX800 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, AMD Geode LX800 you will learn all the available features of the product, as well as information on its operation. The information that you get AMD Geode LX800 will certainly help you make a decision on the purchase.
If you already are a holder of AMD Geode LX800, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime AMD Geode LX800.
However, one of the most important roles played by the user manual is to help in solving problems with AMD Geode LX800. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device AMD Geode LX800 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
