Instruction/ maintenance manual of the product 289604 Graco
Go to page of 10
Instructions G40 Air Assisted Spray Gun 311937G EN For the application of architectural paints and coatings. For professional use only. Model: 288513, 289604 Maximum Working Pressure: 4000 psi (280 bar, 28 MPa) Maximum Air Working Pressure: 100 psi (7 bar, 0.
Warnings 2 311937G Warnings The following Warnings are for the setup, use, grounding, maintenance and repair of this equipment. The exclamation point symbol alerts you to a general warning and hazard symbols refer to procedure-specific risks. Refer back to these Warnings.
Warnings 311937G 3 PRESSURIZED ALUMINUM PARTS HAZARD Do not use 1,1,1-trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in pressurized aluminum equipment. Such use can cause serious chemical reaction and equipment rupture, and result in death, serious injury, and property damage.
Warnings 4 311937G Pressure Relief Procedure Follow this Pressure Relief Procedure whenever instructed to relieve pressure, stop spraying, check or service equipment, or install or clean spray tip. 1. Lock trigger. Turn OFF power and turn pressure control to lowest pressure setting.
Warnings 311937G 5 Clearing a Clog 1. Relieve pressure . Lock trigger (1a). 2. Rotate tip (33) 180°. Unlock trigger (1a). Trigger gun into pail or onto ground to remove clog. 3. Lock trigger (1a). Rotate tip (33) 180° back to spray position. Spraying Refer to your Sprayer Instruction manual.
Warnings 6 311937G 14. If the diffuser (5) was removed, trigger the gun while you reinstall the diffuser with the gun tool (30). Tighten the diffuser securely to obtain a good seal. Torque to 155-165 in-lb (18-19 N.m). When properly tightened, the flange will bottom out on the gun.
Warnings 311937G 7 Fluid Tube Replacement (16) 1. Remove the air inlet fitting (17) using the gun tool (30) and remove the screw (20) using a 3/16 in. hex wrench. 2. Unscrew the fluid inlet fitting (25). Remove and clean or replace the inline fluid filter (24).
Parts 8 311937G Parts ▲ Replacement Danger and Warning labels, tags, and cards are available at no cost. ◆ Included in Needle/Seat Repair Kit 255160 (purchase separately) † Included in RAC Guard.
Technical Data 311937G 9 Technical Data *All readings were taken with fan valve fully closed, (full fan size) at 20 psi (140 kPa, 1.4 bar) and 100 psi (0.7 kPa, 7 bar) and at the assumed operator position. Sound Power tested to ISO 9614-2. Maximum Working Fluid Pressure.
All written and visual data contained in this document reflects the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. For patent information, see www.graco.com/patents 2ULJLQDOLQVWUXFWLRQV This manual contains English.
An important point after buying a device Graco 289604 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Graco 289604 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Graco 289604 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Graco 289604 you will learn all the available features of the product, as well as information on its operation. The information that you get Graco 289604 will certainly help you make a decision on the purchase.
If you already are a holder of Graco 289604, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Graco 289604.
However, one of the most important roles played by the user manual is to help in solving problems with Graco 289604. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Graco 289604 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
