Instruction/ maintenance manual of the product DVP950 GoVideo
Go to page of 38
.
2 Safety Precautions This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
INTRODUCTION 3 IMPORT ANT SAFETY INSTRUCTIONS 1. Read These Instructions All the safety and operating instructions should be read before the product is operated. 2. Follow All Instructions All operating and use instructions should be followed. 3. Keep These Instructions The safety and operating instructions should be retained for future reference.
18. Accessories Use only with the cart, stand, tripod, bracket, or table specified by the man- ufacturer or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over . 19. Damage Requiring Service Refer all servicing to qualified service personnel.
INTRODUCTION 5 T able of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT SAFETY INSTRUCTIONS. . . . . . . . . 3-4 T able of Contents . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Before Use .
6 Before Use Playable Discs DVD (8 cm / 12 cm disc) Audio CD (8 cm / 12 cm disc) In addition, this unit can play a CD-R or CD-RW that contains audio titles or MP3 files. Notes – Depending on the conditions of the recording equip- ment or the CD-R/RW disc itself, some CD-R/R W discs cannot be played on the unit.
7 INTRODUCTION Before Use (Continued) Precautions Handling the unit When shipping the unit Retain your original shipping carton and packing materi- als.
Front Panel 8 Remote Sensor Point the remote control here. Display window Shows the current status of the DVD+VCR. Disc T ray (DVD deck) Insert a disc here. Video Cassette Compartment (VCR deck) Insert a video cassette here. DVD EJECT ( Z Z ) Opens or closes the disc tray to load or unload discs.
9 INTRODUCTION Display Window CDREC TIMER VCR CHP/TRK TITLE PROG. AB SP AM LP EP MP3 ALL CH SAP DVD CD ST HI-FI REC ANGLE active. MP3 MP3 disc inserted. ST Lights up when a stereo broadcast is being received. DVD DVD inserted. CD Audio CD inserted. A y y B Indicates A-B repeat mode.
10 Remote Control DVD & VCR select buttons Sets the remote control to operate either the DVD deck or the VCR deck. POWER T urns the DVD+VCR ON and OFF . TV/VCR Switches between your TV tuner and the DVD+VCR tuner . DISPLA Y Accesses on-screen display .
INTRODUCTION 11 Rear Panel Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. COAXIAL (DVD digital audio out jack) Connect to digital (coaxial) input on audio equipment.
Connections 12 Tips Depending on your TV and other equipment you wish to connect, there are various ways you could connect the DVD+VCR. Use only one of the connections described below . Please refer to the manuals of your TV , VCR, Stereo System or other devices as necessary to make the best connections.
PREP ARA TION 13 Connections (Continued) Basic TV Connections Make one of the following connections, depending on the capabilities of your existing equipment. Due to Macrovision encoding, you may not be able to view DVDs when connecting the DVD+VCR to a TV/VCR combination unit.
14 Connections (Continued) Optional Equipment Connections Note Y ou can listen to DVD audio through the COAXIAL (X) or AUDIO OUT (A2) connectors. The TV tuner and VCR will still be listened to via the RF .
15 PREP ARA TION On-Screen Display (OSD) Some of these functions will be displayed briefly during VCR operation. ❶❷ ❸ ❹ ❺ ❻❼ ❶ T APE SPEED DISPLA Y Shows the current tape speed. ❷ FUNCTION DISPLA Y Indicates the function in progress.
VCR Setup (Continued) The VCR Setup Menu 1 1 Press VCR, then press SETUP/MENU to display the MAIN menu. 2 2 Press 3 3 or 4 4 to select the VCR SETUP menu, then press ENTER. The VCR SETUP menu will appear . 3 3 Press 3 3 or 4 4 to choose a desired item on the VCR SETUP menu.
PREP ARA TION 17 VCR Setup (Continued) Setting the Clock The VCR allows two ways to set the time and date: the Auto Clock Feature or manually . The Auto Clock Feature enables the VCR to set up the clock when the VCR is turned off. Auto Clock Set The Auto Clock Set feature is set to ON at the factory .
DVD Setup 18 General Information This manual gives the basic instructions for operating the DVD+VCR. Some DVDs require specific operation or allow only limited operation during playback. When this occurs, the symbol appears on the TV screen, indicating that the operation is not permitted by the DVD+VCR or is not available on the disc.
PREP ARA TION 19 DVD Setup (Continued) Initial Settings Y ou can set your own Personal Preferences on the DVD+VCR. Initial Settings General Operation 1 1 Press DVD, then press SETUP/MENU to display the SETUP menu. 2 2 Press v v / V V to select the desired item.
20 DVD Setup (Continued) Sound Digital Audio Output Each DVD disc has a variety of audio output options. Set the DVD+VCR’s Digital Audio Output according to the type of audio system you use.
PREP ARA TION 21 DVD Setup (Continued) Parental Control Rating Movies on DVDs may contain scenes not suitable for children. Therefore, discs may contain Parental Control information that applies to the complete disc or to certain scenes on the disc.
VCR Operation Normal Playback Preparations: T urn on the TV . T une the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’ s source selector to VIDEO. If a direct VIDEO/AUDIO connection is made between the VCR and the TV , set the TV’s source selector to VIDEO.
OPERA TION 23 VCR Operation (Continued) Normal Recording Preparations: T urn on the power of both the VCR and TV . T une the TV to the DVD+VCR output channel (CH 3 or 4) or set the TV’ s source selector to VIDEO. 1 1 Insert the video cassette that the safety tab is in place.
24 VCR Operation (Continued) 1 1 0 0 Press 4 4 to choose the SPEED item. Press 1 1 or 2 2 to choose the desired recording speed (AUTO, SP or EP). The AUTO mode determines how much tape is left and switches speed from SP to EP , if necessary , to complete recording the program.
OPERA TION 25 VCR Operation (Continued) One-T ouch Recording One-T ouch Recording allows you to make a recording easily of a preset length without using the program timer . Preparations: T urn on the power of both the VCR and the TV . Be sure the TV is set to the VCR output channel (3 or 4).
26 VCR Operation (Continued) VHS Hi-FI Stereo System/ MTS Broadcast This VCR is equipped with the VHS Hi-Fi audio sound system for recording and playback. The information below gives a brief description of Hi-Fi audio and how to record and play a tape in the Hi-Fi audio mode.
OPERA TION 27 VCR Operation (Continued) T ape Counter Memory Feature Real-Time Counter Shows length of tape run in hours, minutes, and sec- onds (refer to the left). Press CLK/CNT to select the real-time counter display . Every press of CLK/CNT changes the TV screen as illustrated below .
DVD and Audio CD Operation Playing a DVD and Audio CD Playback Setup T urn on the TV and select the video input source con- nected to the DVD+VCR. Audio system: T urn on the audio system and select the input source connected to the DVD+VCR. 1 1 Press OPEN/CLOSE to open the disc tray .
OPERA TION 29 DVD and Audio CD Operation (Continued) General Features (continued) Still Picture and Frame-by-frame playback DVD Video Discs 1 Press P AUSE/STEP during playback. The DVD+VCR will now go into P AUSE mode. 2 With a DVD, Y ou can advance the picture frame by frame by pressing P AUSE/STEP repeatedly on the remote control.
30 DVD and Audio CD Operation (Continued) General Features (Continued) Time Search The T ime Search function allows you to start playing at any chosen time on the disc. 1 Press DISPLA Y during playback. The on-screen dis- play appears on the screen. The T ime Search box shows the elapsed playing time of the current disc.
OPERA TION 31 DVD and Audio CD Operation (Continued) Special DVD Features (Continued) Checking the contents of DVD Video discs: Menus DVDs may contain menus that allow you to access spe- cial features. T o use the disc menu, press DISC MENU. Then, press the appropriate number button to select an option.
32 MP3 Operation Notes on MP3 Discs About MP3 An MP3 file is audio data compressed by using MPEG1, the audio layer-3 file-coding scheme. We call files that have the .mp3 file extension MP3 files. The DVD+VCR cannot read an MP3 file that has a file extension other than .
OPERA TION 33 MP3 Operation (Continued) Programmed Playback with MP3 Discs Program allows you to store your favorite tracks for a particular disc in the DVD+VCR memory . Program can contain 60 tracks. 1 1 Follow steps 2 - 3 of MP3 Playing an MP3 disc on page 32.
34 Symptom No power . The power is on, but the DVD+VCR does not work. No picture. No sound. The playback picture is poor . The DVD+VCR does not start playback. The remote control does not work properly . Cause The power cord is disconnected. No disc is inserted.
REFERENCE 35 T roubleshooting (Continued) Symptom Some channels are skipped over when using CH( v v / V V ). Picture and sound of broadcasting channel are weak or missing. Camcorder image is not shown. Camcorder image via A/V input to DVD+VCR is not shown on TV screen.
36 Language Code List Code Language 6566 Abkhazian 6565 Afar 6570 Afrikaans 8381 Albanian 6577 Amharic 6582 Arabic 7289 Armenian 6583 Assamese 6588 Aymara 6590 Azerbaijani 6665 Bashkir 6985 Basque 667.
REFERENCE 37 T echnical Specifications General Power requirements AC 120V , 60 Hz Power consumption 23W Dimensions (approx.) 430 X 97.5 X 360 mm (16.9 x 3.
DVD+VCR Limited W arranty Who Provides the Limited W arranty During the warranty period, the Go-Video W arranty Administrator will honor DVD+VCR service for 90 days labor , 1 year parts from the original date of consumer purchase. See below for Commercial, Industrial or Educational use coverage.
An important point after buying a device GoVideo DVP950 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GoVideo DVP950 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GoVideo DVP950 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GoVideo DVP950 you will learn all the available features of the product, as well as information on its operation. The information that you get GoVideo DVP950 will certainly help you make a decision on the purchase.
If you already are a holder of GoVideo DVP950, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GoVideo DVP950.
However, one of the most important roles played by the user manual is to help in solving problems with GoVideo DVP950. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GoVideo DVP950 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
