Instruction/ maintenance manual of the product IT640-ORA-W Gorenje
Go to page of 20
Ceramic glass induction hob MT Instructions for use, installation, and connection IE GB.
243971 The built-in ceramic-glass cooktop is intended for household use only . Materials used for packaging are nature friendly and may be recycled, deposited or destroyed without any threats to the environment. In order to recognize these features, all packing materials are marked with relevant symbols.
243971 • The appliance may be built-in and connected to the power supply only by a quali fi ed technician. • Particular areas of the cooktop surface (adjacent to the hotplates) are hot during operation. Prevent the children to hang around the appliance and warn them properly against the danger of burns.
243971 A ON/OFF sensor B Hotplate power or remaining heat displays B1 Decimal dot on the power displays: - On : hotplate power control is possible - Off : hotplate power control is not possible C Hotp.
243971 • Ceramic glass hob is fi tted with four hotplates. Hob surface is completely fl at and smooth, without edges to accumulate dirt. • The hob is fi tted with high power induction hotplates. Heat is generated directly at the bottom of the dish, where it is most needed, without any losses through the ceramic glass surface.
243971 Magnet test Use small magnet to test if the dish bottom is magnetic. Only dishes where magnet sticks to the bottom are suitable for induction cooking.
243971 • When buying cookware be careful in selecting size: pot diameter usually refers to the top edge of the dish, which is often larger than the dish bottom. • Steam-pressure pots (economic pots), which use pressure in tightly sealed interior , are especially economic, and save both time and energy .
243971 • After turning the ceramic glass hob on all displays come on for a moment. The hob is ready for operation. • The hob is fi tted with electronic sensors which are switched on if you touch the relevant circle for at least one second. • Each sensor activation is followed by a sound signal.
243971 Fast deactivation • Selected hotplate must be activated, decimal dot (B1) is on. • Press both (+) and (-) (C and E) sensors simultaneously , and the hotplate is immediately switched off. • The hob can be switched off any time by pressing the ON/OFF sensor (A).
243971 During the time extra power is activated, the power of other hotplates is limited. This is indicated on the power display by intermittently showing the selected cooking level and limited power . Activating extra powerful setting • First select the hotplate by touching its relevant sensor , and immediately after press the sensor “P”.
243971 Hint • If the power selection knob remains at level 0 three seconds after the automatic fast heating is activated, that is if you fail to select the power setting for regular cooking, the fast heating function is switched off.
243971 Example: Set the hotplate to power level 6 and leave it operate for some time. If you do not change the above setting, the safety mechanism will switch the hotplate off after one hour and a half.
243971 Remaining cooking time Y ou can display the remaining cooking time by touching the hotplate ON/OFF sensor (C). Switching the timer off When the preset time expires a beep is heard which you can either turn off by touching any sensor or leave it to turn of f automatically after 2 minutes.
243971 • During the time the alarm is activated, timer can not be preset for any hotplate (to enable timer setting function, alarm must be switched off). The hob is equipped with the overheat safety sensors. When they are activated they turn off the hotplates nearest to the control board.
243971 Major stains are removed with special ceramic-glass cleansers. Follow strictly the manufacturer ’s instructions. Be careful to remove any remains of cleansing agent from the hob surface, otherwise they will be heated during the next use and can damage the hob ( fi g.
243971 Before inserting the appliance into the opening in the kitchen worktop, the supplied foam gasket must be attached to the lower side of the glass ceramic (glass) cooking hob (see fi gure above).
243971 empty and no objects may be stored or kept there. • Rear side of the kitchen element must also have a 140 mm high opening along the entire width of the element, and the front part must have an opening of no less than 6 mm.
243971 • The connection should be selected in accordance with the declared charge capacity of the mains and the fuse power . • Such appliances are allowed to be mounted on one side next to a high kitchen cabinet, the height of which may exceed that of the appliance.
WE RESERVE THE RIGHT TO AL TER THE SPECIFICA TIONS WITH NO INFLUENCE T O THE OPERA TION OF THE APPLIANCE. 243971 T echnical information Rating plate A Serial number B Code C Model D T ype E T rademark.
SIVK - ORA ITO 243971/en (04-10).
An important point after buying a device Gorenje IT640-ORA-W (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gorenje IT640-ORA-W yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gorenje IT640-ORA-W - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gorenje IT640-ORA-W you will learn all the available features of the product, as well as information on its operation. The information that you get Gorenje IT640-ORA-W will certainly help you make a decision on the purchase.
If you already are a holder of Gorenje IT640-ORA-W, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gorenje IT640-ORA-W.
However, one of the most important roles played by the user manual is to help in solving problems with Gorenje IT640-ORA-W. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gorenje IT640-ORA-W along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
