Instruction/ maintenance manual of the product GC-RAMDISK Gigabyte
Go to page of 8
Copyright © 2005 GIGA-BYTE TECHNOLOGY CO., L TD. All rights reserved. The trademarks mentioned in the manual are legally registered to their respective companies.
RAMDISK July 29, 2005 GC-RAMDISK.
- 3 - English T able of Contents 1. Product Features ....................................................................................................... 4 2. Product Specifications ..................................................................
- 4 - English z Fastest System Boot-Up speed--Fully SA T A1.0a compliant; i-RAM can be used as a boot device. z Fastest Solid State Disk--Dedicated DDR design, Supports DDR 266/333/400 memory modules.
- 5 - English z One available PCI 2.2 compliant slot z One available SA T A (1.5Gb/s) compliant connector z Systems based on Intel ICH6/ICH7 series, VIA 8237 series, SiS 964, or ULi M1689 South Bridge.
- 6 - English General Precautions: The memory size available will be less than the total size of the installed memory. When the system is set to RAID mode, the RAID controller might occupy some disk space as buffer.
- 7 - English Step 1: Install Memory Module(s) Place i-RAM card on an anti-static pad. The DIMM socket has a notch, so the memory module can only fit in one direction. Push the clips at either end of the DIMM socket outwards to the open position. Insert the memory module into the DIMM socket.
- 8 - English Recommended Memory Support List Please refer to the memory support list below: Note: For the latest memory support list information, please visit GIGABYTE's website at http://www.gigabyte.com.tw. DDR400 (1GB) Module Supplier Comp. Used Module P/N.
An important point after buying a device Gigabyte GC-RAMDISK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gigabyte GC-RAMDISK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gigabyte GC-RAMDISK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gigabyte GC-RAMDISK you will learn all the available features of the product, as well as information on its operation. The information that you get Gigabyte GC-RAMDISK will certainly help you make a decision on the purchase.
If you already are a holder of Gigabyte GC-RAMDISK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gigabyte GC-RAMDISK.
However, one of the most important roles played by the user manual is to help in solving problems with Gigabyte GC-RAMDISK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gigabyte GC-RAMDISK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
