Instruction/ maintenance manual of the product 600 Genz-Benz
Go to page of 7
Owner ’ s Manual PRODUCT DESCRIPTION – The new Streamliner™ 600 bass amplier has been manufactured to the highest degree of engineering standards and practices, resulting in a unique blend of classic and leading-edge technologies.
FRONT P ANEL INPUT – The Streamliner™ 600 is equipped with a ¼” unbalanced instrument input directly feeding a conventional tube voltage amplier stage. The input sensitivity range is from 15 mV to 1.6 volts with an input impedance of ~1M ohms.
3 EQUALIZA TION – The Streamliner™ 600 contains a 3 band equalizer with a user switchable midrange center frequency control. This equalizer is best described by breaking it into its component parts, the shelving bass/treble section and the midrange band-pass section.
REAR P ANEL DIRECT OUTPUT – An XLR balanced direct output is provided for connection to a P A system or directly into a recording studio console or D/A converter .
5 POWER AMPLIFIER – The Streamliner™ 600 uses a state of the art, Class D power amplier design and a high frequency switch-mode power supply (SMPS) to achieve unprecedented high performance and lightweight packaging.
6 Specications SAFE OPERA TING REQUIREMENTS: • Never set an amplier on anything that will tip over or collapse under its weight. • Provide a minimum distance of 25.4 mm (1 inch) around all sides of the amplier for sufcient ventilation.
7 Declaration of Conformity (89/336 EEC-EMC Directive) Manufacturer ’s Name: Genz Benz, a division of KMC Music Corporation Manufacturer ’s Address: 781 1 East Pierce Street Scottsdale, AZ 85257, U.
An important point after buying a device Genz-Benz 600 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genz-Benz 600 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genz-Benz 600 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genz-Benz 600 you will learn all the available features of the product, as well as information on its operation. The information that you get Genz-Benz 600 will certainly help you make a decision on the purchase.
If you already are a holder of Genz-Benz 600, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genz-Benz 600.
However, one of the most important roles played by the user manual is to help in solving problems with Genz-Benz 600. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genz-Benz 600 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
