Instruction/ maintenance manual of the product Servo/Bass Genesis Advanced Technologies
Go to page of 5
Genesis S ervo Bass Cable Owner’s Manual Rev.1. 0.
The Genesis Servo/B ass Cable The concept of our servo -bass system is an easy one to understand. I t emplo y s an accelerometer in the woo fer to constantly monitor the movement of th e cone and instantaneously compare it to the input signal.
Instructions For Groundi ng the Sh ield On Genesis Servo Ca bles Step 1.- Remove the gr ounding screw from the amplifier chassis. This screw is l ocated on the rear left hand corner of t he chassis bottom. Figure 1 Step 2. – Using a small p iece of 240 grit sandpaper sand the paint around th e screw hole until t he chassis metal is exposed.
Step 3. – Using the screw removed i n step 1, attach the ring terminal connector on th e Y-cable to the chassis. Figure 4 Step 4. – Connect the male 1/8” m ini jack connector on the ground lead of the left channel cable pair t o one of the female 1/8” mini jack connectors o n the Y- cable.
Step 5. – Connect the male 1/8 ” mini jack connector on the ground lead of t he right channel servo cabl e pair to the second female 1/8” mini jack conn ector on the Y-cable.
An important point after buying a device Genesis Advanced Technologies Servo/Bass (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Genesis Advanced Technologies Servo/Bass yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Genesis Advanced Technologies Servo/Bass - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Genesis Advanced Technologies Servo/Bass you will learn all the available features of the product, as well as information on its operation. The information that you get Genesis Advanced Technologies Servo/Bass will certainly help you make a decision on the purchase.
If you already are a holder of Genesis Advanced Technologies Servo/Bass, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Genesis Advanced Technologies Servo/Bass.
However, one of the most important roles played by the user manual is to help in solving problems with Genesis Advanced Technologies Servo/Bass. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Genesis Advanced Technologies Servo/Bass along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
