Instruction/ maintenance manual of the product 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0 Generac
Go to page of 56
P O WERED BY GU ARDIAN 7 60cc O HVI V-TWI N QU IETPA CT IND US TRIA L 55 G Owner’ s Man ual Air -cooled Recreational V ehic le Generators QUIETP A CT 55, 65 and 75 • Models: 004702-0, 004703-0 004704-0, 004705-0 004706-0, & 004707-0 This manual should remain with the unit.
Generac ® Pow er Systems, Inc. I NTRODUCTION R EAD THIS MAN UAL THOROUGHL Y If you do not understand any portion of this manual, contact Generac or your nearest Generac Authorized Service Dealer for starting, operating and servicing procedures.
T able of Contents QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators Generac ® Pow er Systems, Inc. 1 Part I — Operating Instructions Introduction ..................................................Inside Front Cover Read This Manual Thoroughly .
2 Generac ® Pow er Systems, Inc. Study these SAFETY RULES carefully before installing, operating or servicing this equipment. Become familiar with this manual and with the unit. The generator can operate safely , efficiently and reli- ably only if it is properly installed, operated and maintained.
Generac ® Pow er Systems, Inc. 3 • Before performing any maintenance on the genera- tor , disconnect its battery cables to prevent acci- dental start up. Disconnect the cable from the bat- tery post indicated by a NEGA TIVE, NEG or (–) first. Reconnect that cable last.
4 Generac ® Pow er Systems, Inc. Section 1 – General Information QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators Please recor d the following information from the generator DA T A DECAL or information decal. 1. Model Number ____________________ 2.
Generac ® Pow er Systems, Inc. 5 Section 1 – General Information QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 1.2 GEN ER A T OR AP P LICAB I LIT Y These generators have been designed and manufac- tured for supplying electrical power for recreational vehicles.
6 Generac ® Pow er Systems, Inc. Section 1 – General Information QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators Figure 1.1 – Connection for 120 V olts Only Figure 1.
Generac ® Pow er Systems, Inc. 7 Section 2 – Operation QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 1.6.4 ENGI NE SP ECIF ICA TIONS T ype of Engine QUIETP ACT 55/65/75 ................................................GT -760 Cooling Method .
8 Generac ® Pow er Systems, Inc. Section 2 – Operation QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 2.2 OPTIONAL R EMO TE S T ART/ST OP P AN EL A remote mounted Start/Stop P anel (F igure 2.2) is available that allows you to start and stop the gener- ator engine conveniently from inside the vehicle.
Generac ® Pow er Systems, Inc. 9 Section 2 – Operation QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators The generator engine releases DEADL Y carbon monoxide gas through its exhaust system. This dangerous gas, if br eathed in sufficient concen- trations, can cause unconsciousness or even death.
10 Generac ® Pow er Systems, Inc. Section 2 – Operation QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 2.7 .2 DO NO T O VER L O AD TH E GEN ER A T OR Y ou can read the rated wattage/amperage capacity of your generator on the generator data decal (see Section 1.
Generac ® Pow er Systems, Inc. 11 Section 3 – Maintenance QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 2.8.4 OVERV OL T AGE PRO TE CTION A solid- state voltage regulator (Figure 2.5) controls the generator’s AC output voltage. This regulator sup- plies an excitation current to the rotor .
12 Generac ® Pow er Systems, Inc. Section 3 – Maintenance QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 3.2 CHANGI NG TH E ENGI N E OI L AN D/OR OI L F I L TER • Change the engine oil after the first 25 hours of operation (after the 25-hour break -in period, see Section 2.
Section 3 – Maintenance QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators Figure 3.3 – Engine Air Cleaner 3.4 CH E CKI NG TH E ENGI N E SP AR K P L UG Clean the spark plug and reset the spark plug gap every 100 hours of operation. 1. Clean the area around the base of the spark plug to keep dirt and debris out of the engine.
14 Generac ® Pow er Systems, Inc. 3.7 CLEAN I NG TH E GEN ER A T OR Keep the generator set as clean and dry as possible. Protect the unit against excessive dust, dirt, corrosive vapors, road splash, etc. P ermitting dirt and mois- ture to accumulate on generator windings will have an adverse effect on the insulation resistance of those windings.
Generac ® Pow er Systems, Inc. 15 3.9 MA JOR SERVICE MAN U AL T o obtain a service manual for your generator , con- tact your nearest Generac Authorized Service Dealer . Make sure to identify your MODEL NUMBER and SERIES. Manuals can be obtained from the internet website (www .
16 Generac ® Pow er Systems, Inc. Section 4 – Notes QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators.
P ART I I – I NS T ALL A TION I NS TR UCTIONS ONL Y QUALIFIED ELECTRICIANS OR CONTRACTORS SHOULD A TTEMPT INST ALLA TION!! D ANGER.
18 Generac ® Pow er Systems, Inc. Safety Rules QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators NO TICE T O I NST ALLER These Installation Instructions have been published by Generac to aid in the installation of the products described in this manual.
Generac ® Pow er Systems, Inc. 19 Safety Rules QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators • Never use the generator or any of its parts as a step. Stepping on the unit can stress and break parts, and may result in dangerous operating con- ditions from leaking exhaust gases, fuel leakage, oil leakage, etc.
20 Generac ® Pow er Systems, Inc. 5.1 P U R POSE AN D S COPE OF TH E I NS T ALL A TION I NSTRUCTIONS These Installation Instructions have been prepared especially for the purpose of familiarizing installers and owners of the applicable equipment with the product's installation requirements.
Generac ® Pow er Systems, Inc. 21 Figure 5.2 - Major Features and Dimensions (Drawing No. 0E1058-A) Section 5 – General Information QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators A 5 4 5 5 74.7 95 . 5 T YP. 183 . 5 2 2 6 . 5 8 21.2 233 .
22 Generac ® Pow er Systems, Inc. Figure 5.3 - Connection for 120/240 V olts • The AC connection system on all air - cooled PRIMEP ACT series generators uses a GROUNDED neutral. • A separate green ground wire is connected to the recreational vehicle’s junction box.
Generac ® Pow er Systems, Inc. 23 6.1.3 SUSP ENDED MOU NTI NG If you are going to suspend the generator below the horizontal support tubing, the suspension method you use with the vehicle frame members must (a) be able to support the weight of the generator AND (b) provide sufficient restraint for the generator .
24 Generac ® Pow er Systems, Inc. Figure 6.5 – T ypical Compartment Construction • If constructing a compartment, line the exterior (underside) of the compartment floor with 26- gauge galvanized steel.
Generac ® Pow er Systems, Inc. 25 Section 6 – Installation QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 6.2.4 AC OUS TIC S F or additional noise abatement, the installer may wish to consider the following: • Using special sound insulating materials.
26 Generac ® Pow er Systems, Inc. 6.3.2 TES TING TH E I NST ALL A TION Generac recommends testing the installation to be sure adequate cooling airflow is available to the unit before placing the unit into service. If the unit shows signs of overheating, you will need to enlarge the air openings.
Generac ® Pow er Systems, Inc. 27 F actory installed generator fuel system components include (a) fuel filter , (b) 12-volt DC electric pump, (c) engine carburetor , and (d) interconnecting lines and fittings. Connect a fuel supply line to the fuel filter inlet.
28 Generac ® Pow er Systems, Inc. Figure 6.15 – T ypical Propane Gas Fuel System 6.5.3 SOME I MPORT ANT CONSIDER A TIONS When installing an LP gas system, consider seriously the following items: • All fittings, lines, hoses and clamps must be tight and free of leaks.
Generac ® Pow er Systems, Inc. 29 The greater the airflow through the carburetor ven- turi, the lower the pressure at the venturi throat. The lower the pressure at the venturi throat, the greater the diaphragm movement, and the greater the move- ment of the regulator valve.
30 Generac ® Pow er Systems, Inc. 6.6.1 MUFF LERS AN D SP AR K AR R ES T ORS This muffler meets code and standard requirements of the U .S. F orest Service.
Generac ® Pow er Systems, Inc. 31 6 .7 .2 W IRING • W iring should be of stranded copper to reduce the chance that vibration may cause breakage. • W ire gauge size should be large enough to handle at least 115 percent of the installed generator's rated maximum current.
32 Generac ® Pow er Systems, Inc. Section 6 – Installation QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 6.7 .7 GROU ND F AUL T CI RCU IT I NTERR U PTERS The National Electrical Code.
Generac ® Pow er Systems, Inc. 33 Section 6 – Installation QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators Figure 6.18 — T ransfer Switch Isolation Method P O WERED BY GU ARDIAN 7 60 cc O HVI V-TWI N QU IETPA CT INDUSTRIAL 55 G Figure 6.
34 Generac ® Pow er Systems, Inc. 6.9 OPTIONAL A C CE S S OR I E S A plug-in receptacle (F igure 6.22) is provided on the generator set, above the muffler enclosure. Use this receptacle to connect an optional remote -mounted start/stop panel to the generator .
Generac ® Pow er Systems, Inc. 35 7 .4 TE STING U N DER L O AD Apply electrical loads equal to about 75 to 100 per- cent of the unit's rated wattage/amperage capacity .
36 Generac ® Pow er Systems, Inc. Section 8 – T roubleshooting QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 8.1 TROU B LE SHOO TI NG GU I DE P ROB LEM CAUSE C OR R E CTION Engine won’t crank. 1. 7.5 amp fuse blo wn. 1. Replace blo wn fuse.
Generac ® Pow er Systems, Inc. 37 Section 9 – Notes QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators.
38 Generac ® Pow er Systems, Inc. Section 1 0 — Electrical Data QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators V - Twin – Drawing No.
Generac ® Pow er Systems, Inc. 39 Section 1 0 — Electrical Data QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators V - Twin – Drawing No.
40 Generac ® Pow er Systems, Inc. 1 3 2 4 6 3 4 7 9 3 8 5 1 0 1 1 1 2 1 3 3 2 1 1 5 14 3 2 1 6 17 2 0 1 8 1 9 2 3 4 4 2 3 2 2 21 2 5 2 6 27 2 8 4 5 30 1 0 31 32 33 34 35 36 6 37 3 39 40 41 42 4 3 44 4 6 52 47 4 8 4 9 50 51 2 6 52 57 56 55 53 54 50 53 58 8 59 60 61 A " " A " T O C ARB .
Generac ® Pow er Systems, Inc. 41 Section 1 1 — Exploded V iews and Parts Lists QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators Base & Pulley – Drawing No.
42 Generac ® Pow er Systems, Inc. VIEW " A" VIEW " A" T ARTE R G R OU N D T O EN G IN E G R OU ND T O CO NT. PANE L 1 2 42 4 5 6 7 5 8 1 0 5 11 4 0 6 14 1 5 1 6 12 2 2 1 3 19 9 5 .
Generac ® Pow er Systems, Inc. 43 ITEM P ART NO . QTY . DESCRIPTION 1 0D8827 1 P ANEL, ENCLOSURE ROOF 2 0A7215 22 SCREW SW 1/4-20X5/8 N W A JS500 3 029451 11.5 FT . T APE ELEC UL FOAM 1/8 X 1/2" 4 0D8825 1 P ANEL, SIDE AND BACK ENCLOSURE 5 0D3700 14 NUT FLANGE M6-1.
44 Generac ® Pow er Systems, Inc. 1 2 3 5 6 7 7 8 9 11 12 1 14 1 5 17 1 8 1 1 8 2 0 21 22 2 3 4 2 6 27 2 8 2 9 30 31 32 33 36 35 37 38 3 9 39 4 0 41 6 42 4 3 44 45 5 4 6 4 4 8 4 9 50 56 57 52 53 54 5.
Generac ® Pow er Systems, Inc. 45 ITEM P ART NO . QTY . DESCRIPTION 1 045756 15 SCREW HHTT M6-1.0 X 10 YC 2 0D1131 1 GU ARD ,F AN 12KW HSB 3 0C3022G 1 HOUSING, BLO WER V -TWIN R V 4 0C9763 4 NUT ,GROMMET 1/4 PLUG 5 0D9782 1 HOSE, BREA THER 6 0C3034 1 NUT HEX M24-2.
46 Generac ® Pow er Systems, Inc. 1 2 3 4 5 6 7 8 9 9 1 0 11 12 2 1 3 14 4 1 5 1 6 17 1 8 1 9 2 0 21 22 2 3 24 5 2 5 2 6 27 7 28,2 30 31 32 33 34 35 36 37 39 4 0 41 42 4 3 44 4 45 5 4 6 39 40 37 36 3.
Generac ® Pow er Systems, Inc. 47 ITEM P ART NO . QTY . DESCRIPTION 1 0C2375 2 SCREW HHC M8-1.25 X 90 G8.8 2 022145 2 W ASHER FLA T 5/16-M8 ZINC 3 029459 2 TENSION SPRING 4 075215 2 W ASHER, SPRING CENTER 5 052858 6 NUT LOCK FL M8-1.25 6 047411 7 SCREW HHC M6-1.
48 Generac ® Pow er Systems, Inc. Section 1 1 — Exploded V iews and Parts Lists QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators 7 60 V - Twin Engine – Drawing No.
Generac ® Pow er Systems, Inc. 49 ITEM P ART NO . QTY . DESCRIPTION 1 0C5730A 1 ASSEMBL Y , CRANKCASE R V 2 0C3008 1 SEAL, 38 I.D . CRANKCASE 3 090388 6 SCREW , HHTT M6-1.
50 Generac ® Pow er Systems, Inc. 5 6 4 3 2 7 8 1 1 0 9 11 12 1 3 14 1 5 1 9 21 22 2 3 2 4 2 5 2 6 1 6 17 1 8 2 0 27 Section 1 1 — Exploded V iews and Parts Lists QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators LP Regulator – Drawing No.
Generac ® Pow er Systems, Inc. 51 ITEM P ART NO . QTY . DESCRIPTION 1 0D5694 1 CASTING, TWIN REGULA TOR HOUSING 2 075475 4 SCREW PPHM M4-0.7 X 10 3 022264 4 W ASHER LOCK #8-M4 4 043180 4 W ASHER FLA T M4 5 0C5765 1 SOLENOID , TWIN REGULA TOR 6 0C6070 1 SPRING-SOLENOID PLUNGER 7 0C4680 1 PLUNGER LP REG.
52 Generac ® Pow er Systems, Inc. Section 1 2 – W arranty QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators CALI FOR N IA AND F EDER AL EM ISSION C ONTROL W AR R ANT Y ST A TEM ENT Y OU .
Generac ® Pow er Systems, Inc. 53 Section 1 2 – W arranty QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators EM IS SION CONTROL S Y STEM W AR R ANTY Emission Control System W arranty (ECS W arranty) for 1997 and later model year engines: (a) Applicability: This warranty shall apply to 1997 and later model year engines.
Part No. 0E1015 Revision B (08/30/02) Printed in U.S.A. Section 1 2 – W arranty QUI ETP ACT 55, 65, and 7 5 Recreational V ehicle Generators GENER AC PO WER SY S TEMS’ TH REE- YEAR LIM ITED W ARR ANT Y FOR RECREA TIONAL VEH ICLE GEN ERA T ORS NOTE: ALL UNITS MUST BE INST ALLED BY GENERAC POWER SYSTEMS AUTHORIZED SER VICE F ACILITIES.
An important point after buying a device Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0 you will learn all the available features of the product, as well as information on its operation. The information that you get Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0 will certainly help you make a decision on the purchase.
If you already are a holder of Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0.
However, one of the most important roles played by the user manual is to help in solving problems with Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Generac 004702-0, 004703-0, 004704-0, 004705-0, 004706-0, 004707-0 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
