Instruction/ maintenance manual of the product WSKS2060 GE
Go to page of 3
WSKS2060W—GE Spacemaker ® Stationary W asher Specification Revised 8/03 360401 Washer Note: W asher wall outlet must be located within 36" of service cord entry .
WSKS2060W — GE Spacemaker ® Stationary W asher Specification Revised 8/03 360401 20" Max. Opening 120V 20A or 208-240V 30A 3-3/4 3 3 Rear Exhaust 5-1/8 8 69-1/8 73 69-1/8 Service Cord Entry at Bank of Appliances R.
Specification Revised 8/03 360401 WSKS2060W — GE Spacemaker ® Stationary W asher Features and Benefits • W asher Features: – 24 ” Granite Look T op – 2 W ash/Spin Speeds – 6 Cycles: Regul.
An important point after buying a device GE WSKS2060 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought GE WSKS2060 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data GE WSKS2060 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, GE WSKS2060 you will learn all the available features of the product, as well as information on its operation. The information that you get GE WSKS2060 will certainly help you make a decision on the purchase.
If you already are a holder of GE WSKS2060, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime GE WSKS2060.
However, one of the most important roles played by the user manual is to help in solving problems with GE WSKS2060. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device GE WSKS2060 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
