Instruction/ maintenance manual of the product MH170FAVT Enerco
Go to page of 16
70176 Rev. C 4/07 ENERCO GROUP, INC., 4560 W. 160TH ST., CLEVELAND, OHIO 44135 • 216-916-3000 FORCED-AIR PROPANE CONSTRUCTION HEATER — Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 2 SPECIFICATIONS MODEL NO. .............................................. 170FAVT GAS TYPE .......................................
3 Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 OPERATING PRECAUTIONS This is a propane, direct-fired, forced air heater. It's intended use is primarily temporary heating of buildings under construction, alteration or repair.
Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 4 FUEL GAS ODOR LP gas and natural gas have man-made odorants added specifically for detection of fuel gas leaks. If a gas leak occurs you should be able to smell the fuel gas.
5 Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 OPERATING INSTRUCTIONS PREPARING FOR OPERATION 1. Check the heater for possible shipping damage. If any is found, immediately notify the factory.
Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 6 HIGH-LIMIT SWITCH X2 LINE VALVE NEUT GRD CHASSIS GROUND CHASSIS GROUND CHASSI.
7 Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 Model #170FAVT PARTS LIST * Item not shown on exploded view Item PART NO.
Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 8 WARNING: USE ONLY MANUFACTURER’S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. REPLACEMENT PARTS ARE ONLY AVAILABLE DIRECT FROM THE FAC- TORY AND MUST BE INSTALLED BY A QUALIFIED SERVICE AGENCY.
70176 Rev. C 4/07 Enerco Group, Inc. | Appareil de chauffage à air pulsé au gaz propane pour chantier de construction Guide d'utilisation et instructions de fonctionnement AVERTISSEMENT : N'UTILISEZ QUE LES PIÈCES DE REMPLACEMENT DU FABRICANT.
70176 Rev. C 4/07 Guide d'utilisation et instructions de fonctionnement Enerco Group, Inc. | Appareil de chauffage à air pulsé au gaz propane pour chantier de construction Modèle nº 170FAVT L.
70176 Rev. C 4/07 Enerco Group, Inc. | Appareil de chauffage à air pulsé au gaz propane pour chantier de construction Guide d'utilisation et instructions de fonctionnement SCHÉMA DE CÂBLAGE M.
70176 Rev. C 4/07 Guide d'utilisation et instructions de fonctionnement Enerco Group, Inc. | Appareil de chauffage à air pulsé au gaz propane pour chantier de construction INSTRUCTIONS DE FONCTIONNEMENT AVANT LE FONCTIONNEMENT 1.
70176 Rev. C 4/07 Enerco Group, Inc. | Appareil de chauffage à air pulsé au gaz propane pour chantier de construction Guide d'utilisation et instructions de fonctionnement ODEUR DU GAZ COMBUSTIBLE Des additifs odorants ont été ajoutés au gaz propane liquéfié et au gaz naturel dans le but de faciliter la détection de fuites.
70176 Rev. C 4/07 Guide d'utilisation et instructions de fonctionnement Enerco Group, Inc. | Appareil de chauffage à air pulsé au gaz propane pour chantier de construction PRÉCAUTIONS LIÉES AU FONCTIONNEMENT Cet appareil de chauffage à air pulsé et à feu direct fonctionne au gaz propane.
70176 Rev. C 4/07 Enerco Group, Inc. | Appareil de chauffage à air pulsé au gaz propane pour chantier de construction Guide d'utilisation et instructions de fonctionnement SPÉCIFICATIONS MODÈLE N° ............................................
Enerco Group, Inc. | Force-Air Propane Construction Heater Operating Instructions and Owner’s Manual 70176 Rev. C 4/07 16 Le non-respect des instructions, telles qu'indiquées dans le présent guide, risque de causer une explosion ou un incendie entraînant des dommages matériels ou des blessures graves, voire mortelles.
An important point after buying a device Enerco MH170FAVT (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Enerco MH170FAVT yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Enerco MH170FAVT - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Enerco MH170FAVT you will learn all the available features of the product, as well as information on its operation. The information that you get Enerco MH170FAVT will certainly help you make a decision on the purchase.
If you already are a holder of Enerco MH170FAVT, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Enerco MH170FAVT.
However, one of the most important roles played by the user manual is to help in solving problems with Enerco MH170FAVT. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Enerco MH170FAVT along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
