Instruction/ maintenance manual of the product STC 2000 Alto-Shaam
Go to page of 11
Instruction manual ST C 2000 ST C 3000.
1 2 3 4 5 6 7 8 9 10 13 14 15 17 18 21 16 11 12 20 19.
2 W e congratulate you on your new AL TO Steam Cleaner We are confident that the new steam cleaner of AL TO will live up to your expectations of modern, quick and efficient cleaning. Y ou have now got a cleaning device, which in many ways will facilitate your future cleaning tasks and make them more efficient.
3 Contents 1.0 Safety instructions and warnings ............ 4 2.0 Operating instructions .............................. 5 3.0 Cleaning with the steam cleaner .............. 7 4.0 Maintenance ................................................ 8 5.0 Trouble-shooting and correction .
4 1.0 Safety precautions and warnings GB Before starting up your steam cleaner, we advise you to carefully read through this section (1.0) and section 2.0. Follow all instructions to minimise the risk of injuries when using the machine. l The machine must only be operated by persons, who have read and understood this instruction manual.
5 2.0 Operating instructions GB 2.1 Operation and control facilities l Steam regulation knob (3). Infinitely variable adjustment. Turning to (+) higher steam pres- sure, turning to (-) lower steam pressure. l Start/stop button for steam cleaner (4): Button with orange lamp turns on the steam cleaner (orange light on).
6 (A) (A) (A) (A) (A) (B) (B) Operating Instructions GB 2.6 End of operation and storage After use the steam cleaner should be stopped in the following way: 1.
7 3.0 Cleaning with the steam cleaner GB A steam cleaner is an efficient appliance for domes- tic cleaning. The diagram below is a list of inspiration showing for which cleaning tasks in normal everyday life the steam cleaner will be of practical use.
8 W ashing of cloths l The cloths can be washed in a washing machine at 60 ° C and dried in a tumbler. Avoid the use of a softener which may reduce the absorbency of the cloth. NOTE! When empty and lead over a bump - i.e. a threshold - the STC 3000 may make a chinking sound.
9 5.0 T rouble-shooting Problem Cause Correction Machine does not start Have you pressed the Try again. heating after having button completely down? been switched on Is the power on? Check the plug of the machine. (control lamp not alight) Check the fuses of the electric installation.
ALTO Danmark A/S Industrikvarteret DK-9560 Hadsund Tel.: +45 7218 2100 Printed in Denmark Copyright ©1999 ALTO Danmark A/S.
An important point after buying a device Alto-Shaam STC 2000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Alto-Shaam STC 2000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Alto-Shaam STC 2000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Alto-Shaam STC 2000 you will learn all the available features of the product, as well as information on its operation. The information that you get Alto-Shaam STC 2000 will certainly help you make a decision on the purchase.
If you already are a holder of Alto-Shaam STC 2000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Alto-Shaam STC 2000.
However, one of the most important roles played by the user manual is to help in solving problems with Alto-Shaam STC 2000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Alto-Shaam STC 2000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
