Instruction/ maintenance manual of the product Design Mincer Gastroback
Go to page of 15
Bedienungsanleitung DESIGN FLEISCHWOLF Art.-Nr . 41400 Bewahren Sie diese Anleitung zur weiteren V er wendung gut auf. Save the instructions for fur ther reference.
19 19 Directions for Use Designation of the par ts a) O / I = ON/OFF switch b) Reverse c) Opening for the drive shaft d) Feedstick e) Feed pan f) W orm housing g) W orm h) Crossed-blade knife i) Mince.
Congratulations on the purchase of your new Gastroback Mincer and hope that it will soon convince you of its many advantages. Y ou will soon find that the Gastroback Mincer is an exceptionally efficient and robust appliance for processing meat and vegetables.
• Never tr y to take the appliance to pieces or open it. • Never leave children unsupervised when the appliance or units of the appliance are in reach. • Never let children play with the appliance or units of the appliance. Children and invalid people have to be super vised using the appliance.
• Only install the appliance in proper for m secure grounding receptacle with adequate electric power supply (alter nating current; 230/240 V , 50 Hz) and ground fault circuit interrupter . The maximum power consumption of the appliance i s 800 Watt.
• Never push the food into the feeding funnel with your fingers. Always use the feedstick for this purpose! The mincer can not mince hard or stingily ingredients (for example: bones, nuts, ginger). If you use hard ingredients like onions or carrots, you have to steam them before adding them to the meet other wise they can block the motor .
2. Loosen the screw plug on the left side of the mincer tur ning it anticlockwise. Firmly secure the worm housing in the opening for the drive shaft. The opening of the wor m housing should be upright. Hold the worm housing with one hand and inser t the screw plug into the side hole of the motor block.
Operating - Mincing meat The mincer operates absolutely dependently and clean. If any problems should occur while operating act upon instructions ´T rouble shooting`. W ARNING: For the case that liquid runs over the mincer while operating tur n the mincer OFF immediately and pull the plug.
out the w o rm housing eventhough there is still meat in the feed funnel tur n the mincer OFF and work according to the instructions ´T rouble shooting guide`.
crossed-blade knife with the mincer plate a. Assemble the wor m housing in the opening of the drive shaft. Place the worm inside the wor m housing (operate according t o t h e instructions ´Assembling` the appliance. see fig. 1 and 2). b. Place the chopper attachment A on the axis of the wor m.
Disassembling W ARNING: T o avoid injur y and damages of the appliance turn the appliance O F F and then wait for appr ox. 6 seconds to be cer tain that the motor is no longer running. Always pull the plug before you star t disassembling or cleaning the appliance.
ating t u r n OFF the appliance immediately , pull the plug and dr y the appliance with a clean cloth. 8. The motor block must only be wiped clean with a moist cloth. Do not clean the motor block under flowing water, nor should it be immersed in water! Do not use alcohol, benzine, etc.
The mincer blocks up permanently while operating. The worm housing moves or loosened while operating. The mince leaks out at the side of the closing ring. Clear a blocking If the worm housing is blocked no mince comes out of the mincer while operating or the motor stops moving automatically because of the overload protection.
W aste disposal The appliance has to be deposed by the definition of the regional waste disposal of electricalscrap. If necessar y get infor mation of the regional waste management enterprise. W arranty W e guarantee that all our products are free of defects at the time of purchase.
GASTROBACK GmbH Gewerbestraße 20 • D-21279 Hollenstedt/Germany T elefon: +49 (0)4165/2225-0 • Fax: +49 (0)4165/2225-29 www .gastroback.de • info@gastroback.
An important point after buying a device Gastroback Design Mincer (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gastroback Design Mincer yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gastroback Design Mincer - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gastroback Design Mincer you will learn all the available features of the product, as well as information on its operation. The information that you get Gastroback Design Mincer will certainly help you make a decision on the purchase.
If you already are a holder of Gastroback Design Mincer, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gastroback Design Mincer.
However, one of the most important roles played by the user manual is to help in solving problems with Gastroback Design Mincer. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gastroback Design Mincer along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
