Instruction/ maintenance manual of the product 41409 Gastroback
Go to page of 15
GASTROBACK ® Instructions For Use Design Mincer Advanced Read all provided instructions before first usage! Model and attachments are subject to change Art.-Nr . 41409 Design Mincer Advanced (standard size 8) included accessories: 41409_DesignFleischwolfAdvanced_Manual_GermanEnglisch3.
Carefully read all provided instructions before you start running the appliance and pay regard to the warnings mentioned in these instructions. ! Impor tant Instructions • A TTENTION: Always ensure that the appliance is turned off (the contr ol switch should be in OFF position) before connecting the plug to the power outlet.
20 Display and control switch Name of the units A) Pusher B) Feed pan C) Motor housing D) Screw plug E) Display F) Control switch G) Spanner H) Closing ring I) Grinding disc 2 mm J) Crossed-blade knife K) W orm L) W orm housing M ) Grinding disc 4,5mm N ) Grinding disc 6 m m NOTE: Y ou can store the grinding discs inside the pusher .
Design Mincer Advanced (standard size 8) Please read all the advice and instructions with care and keep the manual. The mincer is used for mincing meat (uncooked or cooked) and soft vegetables. Please prepare the ingredients before filling them into the feed chute.
responsible for their safety . Children should be super vised to ensure that they do not play with the appliance. • Store the appliance and units in a dr y , clean area out of reach of children . • The work space has to be easily accessible, solid, even, dr y and of sufficient size.
• T o avoid damage, do not use any abrasive cleaners, corrosive chemicals (i.e. disinfectants, bleach) or cleaning pads for operation or cleaning. Never clean or operate the appliance or units o f the appliance with abrasive or hard sharp-edged items.
24 Movable and sharp-edged units – risk of injur y • Never put fingers, wooden spoons or other foreign substance (such as hair , clothing, brushes, cloths) into the feed chute or the holes of the grinding disc when the appliance is plugged into the power point.
25 shocks. Never place the appliance on paper towels or uneven working areas. The air has to able to circulate. IMPORT ANT : Always ensure that the plug is not connected to the power outlet before assembling or disassembling the appliance. Place the mincer on a flat, dr y surface such as a bench top.
26 4. Mount the grinding disc on the knife. The arresting pin must lock precisely into the corresponding recesses (picture F). IMPORT ANT : If the tools overlap the edges of the worm housing the worm is not placed all the way inside the worm housing. T urn the wor m a little bit to make it fit inside but do not use force.
27 3. Place the sausage attachment on the worm housing (picture J) and fit the closure ring over the sausage attachment. Firmly screw the closing ring on the worm housing and tighten by hand. A TTENTION: Pay attention not to cant the screw . If the screw cants the screw thread gets damaged.
28 (hair , towels, cutler y) into the feed chute. Always use the pusher for this purpose! 4 . The display illuminates and you can see for 30 seconds ´Ready` blinking. ´Power`, ´Max`, 6 bars in different length, 6 arrows (3 pointing to the right and 3 pointing t o the left side) and a rotating symbol (picture A) are indicated in the display .
29 4. As soon as the last bit has run through the appliance turn the appliance off (by turning the control switch to OFF) and pull the plug. 5 . Clean and disassemble the appliance right after use and make sure that no leftover food desiccate on the appliance.
30 TIP: If the tools are stucked knock the mincer carefully on a stable cutting board. The grinding disc should be facing up. A TTENTION: Be careful not to damage your bench top, the cutting board or the mincer .
31 The motor stops running while operating. The overload protection might got activated. T urn the appliance off immediately and operate according to the instructions ´Clear a blocking`. After cleaning the motor does not get started • I s the power cord plugged in? again when turning the appliance ON.
off (by turning the control switch to OFF), pull the plug and clean the appliance according to the instructions ´Care and Cleaning`. Storage Always clean the appliance before storing.
An important point after buying a device Gastroback 41409 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gastroback 41409 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gastroback 41409 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gastroback 41409 you will learn all the available features of the product, as well as information on its operation. The information that you get Gastroback 41409 will certainly help you make a decision on the purchase.
If you already are a holder of Gastroback 41409, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gastroback 41409.
However, one of the most important roles played by the user manual is to help in solving problems with Gastroback 41409. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gastroback 41409 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
