Instruction/ maintenance manual of the product 41402 Gastroback
Go to page of 8
19 Directions for Use Name of the units a) OFF/REVERSE b) ON c) CIRCUIT/BREAKER d) Opening for the drive shaft e) Feedstick f) Feed pan g) W orm housing h) W orm i) Crossed-blade knife j) Grinding dis.
people have to be super vised using the appliance. This appliance is not intented for use by persons (including children) with reduced physical, sensor y or mental capabilities, or lack of experience and knowledge, unless they have been given super vision or instruction concerning use of the appliance by a person responsible for their safety .
• T ake care handling the crossed-blade knife because it is ver y sharp. • Never put foreign substance or hard objects into the feed funnel. • Never repair the mincer yourself. If you discover or suspect a fault, send the mincer immediately to your local ser vice workshop for competent examination and repair .
pushing down the feedstick. Use only the feedstick to press down the meat. Never use the fingers! 5. Switch off the mincer after use and disconnect the power supply cable from the mains socket. The mincer will easily continuously mince up to 30 kg of meat (raw , cooked, different kinds of meat).
2. Detach the worm housing from the motor block. 3. Unscrew the closing ring turning it counterclockwise. TIP: If the closing ring is screwed on to tight you can use a screwdriver as shown in the picture 10.
Clear a blocking If the worm housing is blocked no mince comes out of the mincer while operating or the motor stops moving automatically because of the overload protection. A TTENTION: If a blocking occurs turn OFF the appliance immediately . Clear the problem before turning on the motor again.
Notes Notes 31 30.
GASTROBACK GmbH Gewerbestraße 20 • D-21279 Hollenstedt/Germany T elefon: +49 (0)4165/2225-0 • Fax: +49 (0)4165/22 25-29 http://www .gastroback.de • E-Mail: info@gastroback.
An important point after buying a device Gastroback 41402 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gastroback 41402 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gastroback 41402 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gastroback 41402 you will learn all the available features of the product, as well as information on its operation. The information that you get Gastroback 41402 will certainly help you make a decision on the purchase.
If you already are a holder of Gastroback 41402, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gastroback 41402.
However, one of the most important roles played by the user manual is to help in solving problems with Gastroback 41402. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gastroback 41402 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
