Instruction/ maintenance manual of the product TR1-Gold Garmin
Go to page of 8
Page 1 TR-1 Gold Cylinder and Bracket Mounting Instructions Y amaha 9.9 HP 2008 and Newer PN 906-1040-10.
I. Installing the Cylinder & Mounting Bracket Tools Required: One; #1 (small) Phillips Screw Driver One; Wrench ½ In. One; Wrench 7/16 In. One; Wrench 10 MM One; 10 MM Socket Wrench Thread lock (.
Page 3 ITEM PART NUMBER QTY. NAME 1 330-1045-00 1 Nut, Standoff 2 130-1042-00 1 Bracket, Rod Eye Mounting 3 330-1013-00 1 Pin, Stern Pivot 4 380-1044-00 1 Channel, Cylinder MTG. 5 380-1046-00 1 Plate, Standoff Nut 6 310-0206-12 3 Hex Cap M6 X 12 MM 7 130-0084-00 1 “U” Bolt 1 3/4” ID 1/4-20 8 310-0067-01 1 Hair Pin Cotter LG.
Step One: Turn the steering friction lock on the motor (just above the clamps and below the front grip) all the way to the left. (Full free steering rotation.
Install the bolt you just removed into the same hole from the starboard side of the motor to the port side. Put a little thread lock on the protruding end of the bolt. Thread the bolt’s end in to the Standoff Nut ( item 1 ) as shown in gure 6 and tighten the it.
Put a little thread lock on the ends of the three 6 MM Hex CAP Screws ( item 6 ) and install them through one Lock Washer each ( item 11 ) and then the Cylinder Mounting Channel ( item 4 ) and into the Standoff Nut and Plate ( items 1 & 5 ) as shown in gure 9.
Place pin in the Rod Eye Mounting Bracket ( item 2 ) through the cylinder Rod Eye ( item 31 ) as shown. ( Leave the cylinder attached. ) Install the last Medium Hair Pin Cotter ( item 9 ) through the hole in the Bracket pin as shown in gure 12. Turn the motor to the hard to port (prop full to the left side of the boat) position.
Turn the motor hard over to port Figure 14. That will retract the Cylinder rod into the Cylinder. Check that the Cylinder rod is still free to retract at least a little more. Next turn the motor hard over to starboard Figure 15. That will extend the Cylinder rod out of the Cylinder.
An important point after buying a device Garmin TR1-Gold (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin TR1-Gold yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin TR1-Gold - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin TR1-Gold you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin TR1-Gold will certainly help you make a decision on the purchase.
If you already are a holder of Garmin TR1-Gold, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin TR1-Gold.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin TR1-Gold. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin TR1-Gold along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
