Instruction/ maintenance manual of the product Tempe Garmin
Go to page of 7
tempe TM wireless temperature sensor Instructions ............................................. 2 Instructions ............................................. 6 lstruzioni ............................................... 10 Anweisu ngen .................
Instructions See the Important Safety and Product Information guide in the GPS product box for product warnings and other important information. Do not use a sharp object to remove user -replaceable batteries. Contact your local waste disposal department to properly recycle the batteries.
2 Turn the cover counter-clockwise until it is loose enough to remove . 3 Remove the cover. 4 Place the battery into the cover with the positive side facing the inside of the cover. 5 Replace the cover by aligning the dots® and rotating clockwise. Installing the Device NOTICE The sensor should be attached to a secure strap or loop .
This procedure contains instructions for the fenix ™ . If you have another compatible device , see your owner's manual. 1 Move 10 m away from other ANT+ TM sensors. 2 Turn on the device. 3 Bring the device within range (9.8 ft. or 3 m) of the sensor.
FCC Compliance This device complies with part 15 of the FCC Rules. Operation is subject to the following t wo conditions: ( 1) this device may not cause harmful interference, and (2) this device must accept any interference received , including i nterference that may cause undesired operat i on.
and your authority to operate this device under Part 15 regulations. Industry Canada Compliance Category I radiocommunication devices comply with Industry Canada Standard RSS-21 0. Category II radiocommunication devices comply with Industry Canada Standard RSS-31 0.
Garmin v and the Garmin logo are trademarks of Garm i n Ltd . or its subsidiar i es , registered in the USA and other countr i es . ANT+ ' M! fenix ' M and tempe '~ are trademarks of Garmin Ltd . or its subsidiaries . These trademarks may not be used without the express permission of Garmin.
An important point after buying a device Garmin Tempe (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Garmin Tempe yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Garmin Tempe - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Garmin Tempe you will learn all the available features of the product, as well as information on its operation. The information that you get Garmin Tempe will certainly help you make a decision on the purchase.
If you already are a holder of Garmin Tempe, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Garmin Tempe.
However, one of the most important roles played by the user manual is to help in solving problems with Garmin Tempe. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Garmin Tempe along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
