Instruction/ maintenance manual of the product TCS Li-18/20 Gardena
Go to page of 18
D Betriebsanleitung Accu-Hochentaster GB Operating Instructions Battery Pole Pruner F Mode d’emploi Élagueuse sur perche sur accu NL Gebruiksaanwijzing Accu-telescoopkettingzaag S Bruksanvisning Ba.
GARDENA Battery Pole Pruner TCS Li-18/20 Translation of the original German operating instructions. Please read the operating instructions carefully and observe the notes given. Use these operating instructions to familiarise your- self with the product, the proper use and the safety instructions.
General Power Tool Safety Warnings WARNING ! Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and / orserious injury. Save all warnings and instructions for future reference.
b) Do not use the power tool if the switch does not turn it on and off. Any power tool that cannot be controlled with the switch is dangerous and must be repaired. c) Disconnect the plug from the power source and / or the battery pack from the power tool before making any adjustments, changing accessories, or storing power tools.
Remove the battery: – before leaving the Pole Pruner unmonitored; – before removing a blockage; – before inspecting or cleaning the Pole Pruner or performing other work; – when hitting an object.
4. Initial Operation Charging the battery: 6 5 4 8 7 5 9 ß B ß L1 ß L2 ß L3 ß W WARNING! Overvoltage damages batteries and the battery charger. v Ensure the correct mains voltage. Before using for the first time, the battery must be fully charged.
Filling in chain oil: 0 q w DANGER! Physical injury due to chain breakage when the chain on the bar is not sufficiently lubricated. v Check whether sufficient quantities of chain oil are delivered prior to each use. We recommend to use Art. 6006 GARDENA Oil or an equivalent mineral chain oil from a specialist supplier.
Tilting the motor unit: 0° 15° 30° 45° 60° -15° -30° -45° -60° 0 1 The motor unit 1 can be tilted in 15° increments from 60° to – 60°. 1. Remove the battery from the handle (see 4. Initial Operation). 2. Keep both orange buttons 0 pressed.
6. Putting into Storage Storage: w Store out of the reach of children. 1. Remove and charge battery (see 4. Initial Operation). 2. Clean Pole Pruner (see 7. Maintenance), and slide protective cover w onto the bar and close until the snap fit engages. 3.
Replacing the chain: w a h p 1 g s A ß e CAUTION! Physical injury! Cut injury due to the chain. v Wear protective gloves when replacing the chain. When the cutting performance reduces significantly (dull chain), the chain must be replaced. The Allen key for the screws p is situated inside the protective cover w .
8. Troubleshooting w DANGER! Risk of physical injury! Cut injury when the Pole Pruner switches on unintentionally. v Before performing troubleshooting work, remove the battery (see 4. Initial Operation), and slide the protective cover w onto the bar and close until the snap fit engages.
9. Available accessories GARDENA Replacement Battery BLi 18 Battery for additional duration or for replacement. Art. 9840 GARDENA Replacement Chain and Bar Chain and bar for replacement. Art. 4048 GARDENA Replacement Chain Chain for replacement. Art. 4049 GARDENA Chainsaw Oil For lubricating the chain.
11. Service / Warranty Warranty: GARDENA guarantees this product for 2 years (from date of purchase). This guarantee covers all serious defects of the unit that can be proved to be material or manufacturing faults.
360 D Produkthaftung Wir weisen ausdrücklich darauf hin, dass wir nach dem Produkthaftungsgesetz nicht für durch unsere Geräte hervorgerufene Schäden einzustehen haben, sofern diese durch unsachge.
361 H Termékszavatosság Nyomatékosan utalunk arra a tényre, hogy a természavatossági törvény szerint nem kell jótállást vállalnunk azokra a károkra, amelyeket nem a mi készülékeink oko.
362 D EG-Konformitätserklärung Der Unterzeichnete Husqvarna AB, 561 82 Huskvarna, Sweden bestätigt, dass die nachfolgend bezeichneten Gerä te in der von uns in Verkehr gebrachten Ausführung die Anforderungen der harmonisierten EU-Richtlinien, EU-Sicherheitsstandards und produktspezifischen Standards erfüllen.
363 Bezeichnung der Geräte: Description of the units: Désignation du matériel : Omschrijving van de apparaten: Produktbeskrivning: Beskrivelse af produktet: Laitteiden nimitys: Descrizione dei prod.
364 196 Deutschland / Germany GARDENA GmbH Central Service Hans - Lorenser - Straße 40 D - 89079 Ulm Produktfragen: (+ 49) 731 490 - 123 Reparaturen: (+ 49) 731 490 - 290 service @ gardena.com Albania COBAL T Sh.p.k. Rr . Sir i Kodr a 1000 Tirana Argentina Husqvarna Argentina S.
An important point after buying a device Gardena TCS Li-18/20 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Gardena TCS Li-18/20 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Gardena TCS Li-18/20 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Gardena TCS Li-18/20 you will learn all the available features of the product, as well as information on its operation. The information that you get Gardena TCS Li-18/20 will certainly help you make a decision on the purchase.
If you already are a holder of Gardena TCS Li-18/20, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Gardena TCS Li-18/20.
However, one of the most important roles played by the user manual is to help in solving problems with Gardena TCS Li-18/20. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Gardena TCS Li-18/20 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
