Instruction/ maintenance manual of the product GHD 180 Güde
Go to page of 14
#86009 GHD 100 #86011 GHD 140 #86013 GHD 180 English GB Translation of orig inal operating instructions HIGH PRESSURE CLEANER © Güde GmbH & Co. KG - Birkichstrasse 6 - D-74549 Wolpertshausen - D.
A.
B.
C.
D.
E 4 5 7 1 2 3 8 9 6 10 11 12 13 14 15 16 17 18.
Introduction To take delight in your newly purchased high-pressure cleaner so long as possible, please read carefully through this owner’s manual and safety instructions prior to putting the device into operation. Further, we recommend f or you to keep the manual in case you need to recall some of the device’s functionality in the future.
Safe Work Use the device on a con nection with a residual -current device (RCD) safet y switch. Keep your workplace in good order! Disorder at the workplace may result in injuries. Heed to environmental fac tors Do not expose the device to rain. Do not use the device in a damp or wet environment.
ATTENTIO N During extensive operational pauses, turn the device’s main power switch off and unplug it. Do not use the device in temperatures under 0°C. Frost can destroy a device which is not completely emptied. The device has to be stored during the winter time in a frost-proof room.
Use protective goggles Attention! Observe unconditionally the order of connection and never use the device without the water inlet connected – danger of damage! Environmental protection: Dispose of waste in a qualified fashion so that you do not harm the environment.
Now screw part 2 of the spray lanc et (picture B15/12 ) onto part 1 of the spray lancet (picture B1 5/8) (picture A8+ A9 ) . In phase two, connect the high-pressure hose (picture B15/11) to the hose connector (picture B15/6) o n the high-pressure cleaner (picture A / 1+2) .
Only use detergents which are suitable for high-pressure cleaners. • Turn the high-pressure cleaner off • Pour the detergent into the detergent container (picture E3) Warranty The warranty applies exclusivel y to material defects or manufacturing defects.
Filter Cleaning/Checks – Vario Nozzle Cleaning Unscrew the adapter on the water supply connection and pull out the filter sieve by narrow, flat pliers.
DECLARATION OF EU COMPLIANCE We, Güde GmbH & Co. KG Birkichstrasse 6 D-74549 Wolpertshausen Germany hereby declare that the conc ept a nd construction of the below-mentioned devices in ve rsions which we market comply with the respective elementary requirements established by EU guidelines on safety and hygiene.
An important point after buying a device Güde GHD 180 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Güde GHD 180 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Güde GHD 180 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Güde GHD 180 you will learn all the available features of the product, as well as information on its operation. The information that you get Güde GHD 180 will certainly help you make a decision on the purchase.
If you already are a holder of Güde GHD 180, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Güde GHD 180.
However, one of the most important roles played by the user manual is to help in solving problems with Güde GHD 180. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Güde GHD 180 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
