Instruction/ maintenance manual of the product MU-150C Furuno
Go to page of 40
MUL TI-PURPOSE LCD DISPLA Y MU-150C Back.
.
i SAFETY INSTRUCTIONS Safety Instructions for the Operator WARNING Do not open the equipment. Only qualified personnel should work inside the equipment. Do not disassemble or modify the equipment. Fire, electrical shock or serious injury can result. Use the proper fuse.
ii T A BL E OF CONT ENT S FOREWORD ........................................................................................................ iii SYSTEM CONFIGUR A TION ................................................................................ iv EQUIPMENT LISTS .
iii FOREWORD A W ord to the Ow ner o f the MU-150C FURUNO Electric Com pany thanks you f or pur chasing the MU-150C 1 5” Multi-Purp ose LCD Display . We are conf ident you will discover why the FURUNO nam e has becom e synonymous w it h qua lity and reliabilit y .
i v SYSTEM CONFIGUR A TION 24 VDC or 100 - 240 V AC Navigator (GPS, etc.)* Control unit of Video Sounder (e.g., FCV -1200 series) Radar , Video Plotter , Navigator , Video Sounder , Scanning Sonar , etc. * = When using the FCV -1200 series or CH-250, NMEA 0183 data may be output to the MU-150C instead of the interface unit.
v EQUIPM ENT LISTS S t anda rd supp ly N ame T ype Code N o. Qty Remarks AC sp eci f ic a tion Di spl ay U ni t M U-150C − 1 DC speci fic ation SP10- 028 01 00 1-41 4-4 60 For DC S par e P art s * S.
1 1 MOUNTING Refer t o t he outline drawing at the end of the manual for mount ing di mensions. Note : The LCD is made of glass. Handle it w it h care. 1.1 Display Unit The display unit m ay be flush mount ed in a p anel or on a deskt op, using the optional bracket.
2 Cover Display Unit See Note 2. Display unit and cover 3. Fasten the displa y unit to the mounting locat ion with six tapping screws (5X30). Note 1: Hex head bolts m ay also be used to f asten the display unit . However , their length m ust be at least 30 mm.
3 Desktop mounting The display unit can be mounted on a desktop, using t he optional bracket (T ype: FP10-02510, Cod e No.: 001-414-510). 1. Fasten the m ounting base (lower) to the m ounting location with four sets of hex head bolts, spring washers, f l at washers and nuts.
4 3. Loosel y sc r ew six screw s (M5X 15) i nto the hol es at the r ear of the dis pl ay unit . Set the screw s on the di spl a y unit to t he holes on t he br ac k et and then t ighten t he screw s. (Not e that t he displ ay unit m ay al so be mounted i n port r ai t ori entati on.
5 5. Grease the t w o hex head bolts f or f astening the display un it to the mounting base (lower). 6. Fasten the displa y unit to the mounting base (lo wer) with the two hex head bolts greased at step 5. Hex Head Bolt Fastening the mount ing base (lower) to the disp lay unit 7.
6 1.1.1 Hood (option) A hood (portrait or lands cape) is optionally avail able. At tach it to the display unit with V elcro tape as shown below . 1. Attach nine sets of V elcro tape to the display un it at the locations shown belo w , in as straight as possible.
7 2 WIRING 2.1 Wir ing E x ternal Equip ment Connec t extern al equi pm ent to the M U-150C by referr i ng to the draw ings i n thi s sect ion. A cabl e w it h c onnec t or at both ends i s provi ded t o connect equi pm ent .
8 Co nnec ting FC V - 12 00 seri es an d CH- 250 Usi ng t he cables des i gnat ed b elow (or equivale nt) t o c onnec t the FCV -120 0 s er i es or CH-2 50 m ak es thei r int erface uni t of the F CV -1200 ser i es and CH-2 50 unnec essary . T he mi ni D-SUB 15 P connector c a nnot be u s ed t o connect the FCV -1 200 s er i es and CH -250.
9 • Cable 06S4078 is of waterproof construction, however , the MU-150C is not w aterproof (specificat ion IPX0). Therefore, remove rubber cover and f ixing metal from the display side of t he cable.
10 3 A D JUSTM ENTS Control s for adj ustment of the pi cture are pro v i ded on t he re ar of t he di splay unit. O pen the small cover to a ccess the co ntrol s.
11 3.1 Pict ure A djustment Contras t and pi c t ure are adj usted w i th [S1] : Opens m enu; select s menu i tems. [S2]: Incr e a se s setting . [S3]: D ecre ase s settin g. [S4]: Ini tia lizes sett in g . Note : T hough “EXIT ” is pr i nted on the CO NE Board (10P 68 77), t he f uncti on of S4 swi tch is “RESET .
12 3.2 RGB Adjustment Color m ay be adjus t ed wi t h the foll o wi ng potenti ometers . T urn the pot entiom et ers cl oc kw ise to i ncrease col or .
13 4 OPERA TION FURUNO POWER Switch BRILLIANCE Control LED Display unit POWER s witch: T urns the po we r on/off. The LED lamp lights in green when the unit is turned on and goes o f f w hen the unit is t urned of f .
14 5 M A INTEN A N CE, TROUBLESHOOT ING WARNING ELECTRICAL SHOCK HAZARD Do not open the equipment. Only qualified personnel should work inside the equipment. 5.1 Mainte nance Rou tine m ain tena nce Regular m ai nte nanc e is i mport ant for good per f ormance.
15 5.2 T roublesh ooting The table below provide s troubleshooting proce dures to use when no picture appears. If you cannot restore t he picture, do not attem pt to check inside the equipm ent – there are no user serviceable parts inside. Ref er any work to a qualified t echnician.
A P-1 A PPEN D IX M odification for Switching fr om Landscape to Portrait Orient ation T o use t he MU-150C f or portrai t w ith the CH-37, FCV -1200 ser i es, F CV -1500 seri es or FR-176 0DS, t he LC D assem bly m us t be turned 180°. 1. Pl ace the di splay unit on a wor k benc h w it h t he L CD si de dow n.
A P-2 4. Referring to t he arrow s in the figure belo w for location, disconnect the connector and four po w er s w itch tag term inals and release cable from CK clamp. Note: When disconnect ing the tag term inals, pull the m by the metal part of the term inal.
A P-3 5. Unf as t en the eig ht screw s marked wi t h the arrow s in the fi gure below . Dis play uni t, r ear v i ew 6. Rel ease the ca bl e from t he clamp m ar ked w ith the gray ar r ow in t he figure abo v e. 7. T urn the LCD assem bl y 180° . POWER chassis Dis play uni t, r ear v i ew 8.
A P-4 1 1. F asten cables with the clamps marked with the white arrows in the f igure below . Connect the po w er co nnector to J1 on the pcb 10P387 9 as follows: 1, Brown; 3, O range ; 4, Purple, 6, W hite. Location of pow er swit ch and pcb 10P3879 12.
SP - 1 E2025S01B SPECIFICATIONS OF MULTI - PURPOSE LCD DISPLAY MU - 150C 1 GENERAL 1.1 Display 15.0 inch color LCD, 304.1 x 228.1 mm 1.2 Brightness 180 cd/m 2 typical, 150 cd/m 2 minimum 1.3 Resolution VGA (640 x 480), XGA (1024 x 768) 1.4 Viewing Angle 160 ° (left/rig ht: 80 ° , up/down: 80 ° ) 1.
This page is intentionally left blank ..
ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ 1 0CQ-X-985 1 -5 MU- 1 50C-H-DC-CS MU- 1 50C-H-DC-CS.
ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ ＰＡＣＫＩＮＧ ＬＩＳＴ 1 0CQ-X-9855 - 1 MU- 1 50C-H-AC-CS MU- 1 50C-H-AC-CS.
A - 2.
.
.
.
.
.
.
.
.
Your Local Agent/Dealer Your Local Agent/Dealer 9-52 Ashihara-cho, 9-52 Ashihara-cho, Nishinomi y a 662-8580, JAPAN Nishinomi y a 662-8580, JAPAN Tele p hone : Tele p hone : 0798-65-2111 0798-65-2111 Fax Fax 0798-65-4200 0798-65-4200 : : F IRST EDITION : F IRST EDITION : JAN JAN .
An important point after buying a device Furuno MU-150C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno MU-150C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno MU-150C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno MU-150C you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno MU-150C will certainly help you make a decision on the purchase.
If you already are a holder of Furuno MU-150C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno MU-150C.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno MU-150C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno MU-150C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
