Instruction/ maintenance manual of the product FS-1570/2570 Furuno
Go to page of 2
Models FS-1570/2570 Catalogue No. S-023 MF/HF RADIOTELEPHONE ● Distress, safety and routine communications ● Fully meets GMDSS carriage requirements ● Instant selection of 256 preset channels .
GENERAL Frequency Range TX: 1.6 to 27.5 MHz RX: 0.1 to 30 MHz Channels 256 channels, preset by competent service depots, from - All ITU RR Appendix 16 (4 - 27.5MHz) - All distress frequencies in telephony , DSC, NBDP - All telephony frequencies allocated by national authorities according to ITU RR Article 8 (1.
An important point after buying a device Furuno FS-1570/2570 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Furuno FS-1570/2570 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Furuno FS-1570/2570 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Furuno FS-1570/2570 you will learn all the available features of the product, as well as information on its operation. The information that you get Furuno FS-1570/2570 will certainly help you make a decision on the purchase.
If you already are a holder of Furuno FS-1570/2570, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Furuno FS-1570/2570.
However, one of the most important roles played by the user manual is to help in solving problems with Furuno FS-1570/2570. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Furuno FS-1570/2570 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
